Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Chino
A gate that won’t swing or a hinge post that’s leaning toward your driveway isn’t something to put off in Chino. We know, because we’re out here every week. Gatewood Fence & Gate handles gate parts and welding for both the older ranch parcels off Euclid Avenue and the newer HOA-gated communities like The Preserve, and we answer the phone with a live person when you call (877) 610-2993. Hal Gatewood started this company in 2001, and the welding truck that rolls into Chino carries equipment for one job most companies won’t touch: fixing the gate that’s already in your driveway, on site, without hauling it to a shop. That’s the repair-first approach we’re built on, and it’s why most Gate Parts & Welding calls in Chino end with the gate working again that same visit.
Why Gatewood Fence & Gate Is Chino’s Preferred Gate Parts & Welding Company
Chino is a specific kind of market, and you only learn that by working it. The 91710 corridor still has dairy-legacy parcels with welded pipe swing gates that have been opening and closing since before the subdivisions went in. The 91708 side is all master-planned communities where the HOA drives every material choice. We’ve welded hinge barrels on a farm gate off Pine Avenue in the morning and matched HOA-coded pickets on a slide gate in The Preserve that afternoon. That range is why local reviews from Chino homeowners mention the same thing: somebody showed up, looked at the actual gate, and fixed it instead of quoting a full replacement.
Every job includes the 90-Day Done Right Promise in writing. If something’s not right, Hal comes back. No runaround, no third-party warranty company, no fine print. The name on the shop is the name on your invoice, and the shop is down the road in the Inland Empire, not three states away. Chino crews are dispatched from that local office, so a gate problem on a Saturday afternoon doesn’t wait for a Monday call center to open. You call, a person answers, and we get someone to your gate.
Our Gate Parts & Welding Services in Chino
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. On older Chino ranch homes built in the 1960s and 1970s, the original hinge posts were often set in concrete footings that were undersized to begin with. Decades of hard water from the local groundwater basins have also worked their way into the hinge barrels, causing the kind of wear that makes a gate lean. We cut out the old hinge, weld in a new barrel or leaf, and reset the post if the footing’s given up. Most hinge replacements in Chino run $180 to $320 per hinge, including the weld and the hardware.
Post Replacement
Chino’s heat is hard on gate posts. Sustained summer highs above 100°F cause the metal to expand and contract daily, and over 30 or 40 years that cycle loosens even well-set posts. On 1950s-era ranches along the 91710 corridor, we regularly find posts that look fine at ground level but have rotted or crushed footings below the soil line. We cut the post, dig out the old footing, set a new post in concrete, and weld the gate back to it. Post replacement in Chino typically runs $350 to $650 depending on post size and how much concrete has to come out. We quote that price before any digging starts.
Rail Repair
Fix the panel without the post and you’ll fix it twice. But rail repair is its own job, and in Chino we see two very different failure types. On newer tract homes, builder-grade slide gate rails get worn by rollers that were never adjusted properly after installation. On older properties, the rail itself rusts through where sprinklers have been hitting it for 25 years. We weld in new rail sections or reinforce the existing one, and we always check the post before we call it done. Rail repair runs $150 to $400 in Chino, and most jobs are finished the same day we come out.
Custom Welding
Some gates shouldn’t be replaced with a catalog part, because a catalog never matched them in the first place. Chino’s older dairy-legacy properties often have swing gates made from 2-inch schedule-40 pipe that was welded on site decades ago. When a hinge tears or a cross-member cracks, we weld it back to match the original. On HOA-controlled properties, we keep pre-approved ornamental pickets and finish hardware on the truck so we can weld a repair that passes architectural review without a violation letter. Custom welding in Chino is quoted per job, but most on-site weld repairs land between $120 and $400.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Chino
We’re certified on nine major gate brands, and in Chino we see a concentration of Linear boards on older retrofit setups, Ghost Controls on newer residential slide gates, and DoorKing on the centralized monument gates that HOA communities like The Preserve depend on. Because we work this area weekly, we keep brand-specific control boards, remotes, and hardware in the truck rather than ordering them and hoping they arrive. That means less waiting for Chino homeowners, especially when an HOA gate is stuck and nobody can get in or out.
Common Gate Parts & Welding Problems We See in Chino Homes
- Builder-grade slide gate operators stripping out in the heat. Post-2000 tract homes in 91708 often came with entry-level slide operators, and 100-degree Chino summers cause the metal rack to expand enough that the pinion gear loses its bite. Once the teeth strip, the gate is stuck mid-travel. We swap the operator and re-set the limit switches for the real summer range, not the showroom spec.
- Manual farm gates leaning because the original post footing failed. On 1950s and 1970s ranch lots in 91710, hinge posts were frequently set in footings that were too shallow for a 12-foot welded pipe gate. After 40 years of Chino heat and hard water, the post leans and the gate drags. We fix the post first, then the gate, because fixing the panel without the post means you’ll be calling us again next year.
- Rollers and hinges seized from mineral scale. Chino’s groundwater produces notoriously hard water, and that scale builds up on anything that moves. Gate rollers that would last a decade on the coast fail in half that time here because the bearings and hinge pins get coated with mineral deposits. We replace the rollers and recommend a seal kit where it makes sense.
- Automation added later with no power run. In newer Chino developments, lots of gates were installed manual and automated years later. The problem is the builder never ran conduit, so there’s no power at the gate. We trench and lay conduit after the fact, which works fine, but it’s a job most national companies won’t quote because it requires a welder and an electrician on the same crew.
Pricing for Gate Parts & Welding in Chino, CA
Here’s what we charge in Chino, in plain numbers. Hinge replacement runs $180 to $320 per hinge. Post replacement is $350 to $650 depending on post size and footing removal. Rail repair runs $150 to $400. Custom welding is quoted per job, but most on-site weld repairs fall between $120 and $400. Adding automation to a manual gate, including the operator, conduit, and labor, starts around $1,200 and depends on how much trenching the power run requires. We quote the full price before any work starts, and the number we give you is the number on the invoice. Every Chino job also carries the 90-Day Done Right Promise. Call (877) 610-2993 for a free estimate, and ask about the $40 off any repair over $200 if it’s a repair call. Seniors and veterans always get 10% off, no expiration.
We Also Serve Cities Near Chino
Our crews run regular routes through Chino every week, and we handle the same Gate Parts & Welding work in the surrounding communities. That includes Chino Hills, Los Serranos, Ontario, and Montclair. If you’re near the Chino border, call anyway. We’ll tell you straight whether we can get there this week, and there’s no trip charge inside the county.
Serving Chino, CA - Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Chino
If you have an HOA letter specifying the exact picket profile, color, or hardware finish, we can usually get a welding truck to The Preserve within one to two days. Our crews keep pre-approved ornamental pickets and common finish hardware on the truck specifically because Chino HOAs move fast on violations. Call (877) 610-2993, tell us what the letter says, and we’ll match it exactly the first time.
Nine times out of ten, the hinge post footing has failed, not the gate itself. On 1970s-era Chino ranch lots, the original posts were often set too shallow for the size of the welded pipe gate they carry. We reset the post in a new concrete footing and then address any hinge wear. The gate panel usually doesn’t need replacing, just re-hanging. That’s the repair-first difference. Call (877) 610-2993 and we’ll come look at the post before we sell you anything.
Yes, and we do it regularly on the older parcels in 91710. We mount the operator on a new post, trench a conduit run for power, and tie it into a control board that matches the gate’s weight and swing radius. We don’t tear up more than the trench needs, and we restore the ground after. A full automation job, including the operator and the power run, starts around $1,200. We’ll quote it in writing before we dig.
Chino’s groundwater is hard, and that mineral scale builds up on roller bearings and hinge pins much faster than it would in, say, Long Beach or Huntington Beach. A roller that would last eight years on the coast might fail in three or four here. We see it constantly on both the ranch gates in 91710 and the HOA slide gates in 91708. The fix is replacing the roller and, where the design allows, installing sealed bearings. Figure $85 to $130 per roller replacement, installed.
For a structural weld on an HOA gate in Chino, you should check your community’s architectural guidelines first. Some Chino HOAs require written approval before any modification to a monument gate or a gate on a street-facing driveway. But if it’s a like-for-like repair replacing a failed hinge or re-welding a cracked rail with no change in appearance, most boards don’t require a review. We’ll match the existing materials exactly, so nothing looks different. When in doubt, call (877) 610-2993 and we’ll help you figure out what your HOA actually requires before any weld happens.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal has been repairing gates since 2001, and his name is on the shop and every invoice.