Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Cedar Hill
Gate parts and welding in Cedar Hill usually means one of two things: a hinge post that has started leaning after a wet spring, or a weld that cracked on an ornamental iron gate built in the 1990s. Most jobs run between $140 and $480, and we can often weld the repair on the spot in your driveway rather than hauling the gate off. If you live off the escarpment side of town, your gate is fighting something flat suburbs like DeSoto never deal with.
We’re Gatewood Fence & Gate, and we’ve been doing Gate Parts & Welding work since 2001. Hal Gatewood’s name is on the shop and on every invoice. Call (877) 610-2993 and a live person answers, day or night. We show up in Cedar Hill when we say we will, with the truck stocked and the welder ready.
Why Gatewood Fence & Gate Is Cedar Hill’s Preferred Gate Parts & Welding Company
Homeowners in Cedar Hill don’t call us because they want a new gate. They call because their HOA sent a letter, or the latch stopped catching, or a hinge post started tilting toward the driveway. We repair first. Hal would rather weld a cracked hinge plate in your driveway than sell you a whole gate section you don’t need, because replacing a panel without fixing the post means you’ll fix it again next year.
Every job carries the 90-Day Done Right Promise, in writing. If the weld fails or the hinge shifts within 90 days, one call brings us back. No runaround, no “that’s not covered.” That promise matters in Cedar Hill because the ground under your gate is working against you all year long. We know the parts of town where clay heave is worst: the hillside lots along Joe Wilson Road, the brick subdivisions around the 75104 ZIP, and the gated communities off Belt Line and Pleasant Run.
We also answer the phone. You won’t get a voicemail tree or a call center. You get a live person, 24/7, because a gate that won’t close at 11 p.m. on a Cedar Hill slope is a security problem, not a tomorrow problem.
Our Gate Parts & Welding Services in Cedar Hill
Hinge Replacement
Hinges on cedar and iron gates in Cedar Hill take more abuse than hinges on flat ground. Gravity pulls a gate downhill on a sloped driveway, and the hinge pins wear unevenly. We keep heavy-barrel steel hinges, adjustable hinges, and self-closing spring hinges on the truck, and we weld replacements in place. No torching through the post unless we have to. A hinge replacement on an ornamental driveway gate in Cedar Hill typically runs $140-$260.
Post Replacement
This is the big one on the escarpment. A gate post that was set only two feet deep will heave after one or two wet springs in Cedar Hill’s Blackland Prairie clay. The ground swells, the post moves, and suddenly the latch won’t catch and the gate drags. We drill new footings 36 to 42 inches down, past the active clay zone, and set the post in concrete with proper drainage. Post replacement in Cedar Hill runs $350-$750 depending on post size, gate weight, and whether we’re working on a slope. We won’t prop up a failing post and call it fixed.
Rail Repair
Top and bottom rails on 1990s tubular steel gates rust from the inside out. You’ll see paint bubbling near a weld joint first, then flaking steel. We cut out the rotted section, weld in new matching rail stock, and grind it smooth before paint. Rail repair runs $120-$300 depending on rail length and access. Most Cedar Hill HOAs ask that we match the original gate profile and finish, and we do.
Custom Welding
Sometimes the gate is worth saving even when the parts catalog doesn’t have a match. Custom welding covers cracked scrollwork, missing pickets, broken latch housings, and reinforcing plates where hinges have torn through thin-walled tubing. We weld on site in Cedar Hill so you watch the work happen. Custom welding jobs start around $95 and rarely exceed $400 unless we’re rebuilding a big section.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cedar Hill
If your automatic gate runs on a FAAC, BFT, Linear, or Viking operator, we can work on it. We’re certified to service nine major gate brands, including those four, and we keep common parts for them in the truck. That means less waiting when a gearbox strips or a limit switch quits on a gated entry off Wintergreen Road. We don’t rig operator parts we can’t verify. If your keypad or photocell is acting up after a winter ice storm, we diagnose it the same visit.
Common Gate Parts & Welding Problems We See in Cedar Hill Homes
- Heaving gate posts on escarpment-side lots. Cedar Hill’s clay soil swells in spring and shrinks in summer. Posts set shallow move within a year or two, and gates start binding at the latch end. The fix is a deep footing, not a shim.
- Cracked welds on 20-to-30-year-old ornamental iron gates. Most Cedar Hill subdivisions with brick veneer homes went up in the 1990s and early 2000s. Those gates are now hitting peak corrosion and weld fatigue cycles. A hairline crack at a hinge weld spreads fast.
- Hinge post rot at ground level. Water pools where the post meets concrete, and the Blackland clay holds moisture against the steel. We see this constantly in the HOA communities around Joe Wilson Road and New Clark Road.
- Latch and lock hardware that freezes or jams after ice storms. Cedar Hill sees sub-freezing nights followed by 100-degree summers. That thermal cycling loosens fasteners and cracks cast latch bodies. We stock replacements and can weld new strike plates when the old one is wallered out.
Pricing for Gate Parts & Welding in Cedar Hill, TX
Here’s what you can expect to pay in Cedar Hill. Hinge replacement runs $140-$260. Post replacement runs $350-$750, with the higher end on sloped lots where we’re drilling through rocky escarpment soil. Rail repair runs $120-$300. Custom welding starts around $95 and most jobs land between $150 and $400. Those are real ranges from jobs we’ve done in Cedar Hill, not national averages.
What moves the price: gate weight, post depth, access for the welder, and whether we’re matching an HOA-approved design. The quote is agreed before we start, in writing. No trip charge inside the county. And right now, take $40 off any repair over $200. Call (877) 610-2993 for a free estimate over the phone.
We Also Serve Cities Near Cedar Hill
Our crews regularly run to Cedar Hill and the surrounding communities: DeSoto, Glenn Heights, Midlothian, and Grand Prairie. Same owner, same promise, same stocked truck. If you’re on the edge of town and not sure we cover your road, call and ask. If we can’t get there, we’ll tell you straight.
Serving Cedar Hill, TX - Our Local Coverage Area
We’re based in the Cedar Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Cedar Hill
Yes, in most Cedar Hill HOAs you need written approval before changing a gate post, especially if the post is visible from the street or part of a shared entry. Most Cedar Hill subdivisions requiring ornamental iron or tubular steel gates also require matching materials. We can give you a spec sheet and photos for your management company. Many HOAs approve repairs faster when the scope is repair-only, meaning we’re fixing what’s there instead of changing the design. Call (877) 610-2993 and we’ll help you put the approval packet together.
Your gate starts binding at the latch end, the gap between gate and post gets tighter at the top than the bottom, or the gate drags on the ground on one side. In Cedar Hill, heaving shows up most after a wet spring because the Blackland Prairie clay swells and pushes shallow-set posts out of plumb. We recently reset a sagging ornamental iron driveway gate in the Lake Ridge HOA neighborhood where a previous contractor had set the hinge post only 24 inches deep. After drilling a 42-inch footing and welding on heavier steel hinges, that gate swings true again. If your gate moved after the last rain season, call us for a look.
Yes, if the post is solid and only the hinge or hinge plate is worn, cracked, or broken, we can weld a new hinge or a reinforcing plate onto the existing post. We do this on Cedar Hill gates all the time. If the post itself is leaning or rusted through at ground level, welding a new hinge onto it is a short-term patch that will fail again. We’ll give you the straight answer either way and quote the least work that will actually hold.
We do. Hal has worked on shared entry gates and HOA gate systems around Cedar Hill for years, including operators from FAAC, BFT, Linear, and Viking. Shared entries usually mean coordinating with a management company and sometimes working with an approval board. We can work around those schedules. We also carry parts for common shared-entry hardware so we’re not making two trips. Call (877) 610-2993 and we’ll walk the gate with your maintenance contact.
Yes, when we re-level a gate on a sloped Cedar Hill driveway, part of the job is verifying and realigning the safety photocells and closing force settings after the gate geometry changes. A gate that has been re-hung at a different angle can trip the safety beam or reverse incorrectly if the photocells aren’t recalibrated. We test the full open-close cycle before we leave and we stand behind it for 90 days.
Call Gatewood Fence & Gate for Gate Parts & Welding in Cedar Hill
If your gate is sagging, cracking, or just won’t latch, call (877) 610-2993. You’ll get a live person who knows Cedar Hill’s HOAs, its clay soil, and its escarpment slopes. We’ll give you an upfront price, we’ll show up when we say, and we’ll fix it right the first time. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Cedar Hill and the DFW metro since 2001.