Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Broad Ripple
If your gate in Broad Ripple needs Gate Installation - Broad Ripple, a post reset, or a weld that actually holds, you’ll want someone who knows this neighborhood’s peculiar gate problems. Gatewood Fence & Gate has been fixing gates since 2001, and we work in Broad Ripple all the time. Call (877) 610-2993 and Hal will answer. The person who answers the phone is the person whose name is on the shop. That matters more in 46220 than most places, because the gates here are old, the lots are tight, and the Monon Trail means hardware wears out in ways the big-box replacement companies don’t understand.
Why Gatewood Fence & Gate Is Broad Ripple’s Preferred Gate Parts & Welding Company
We’re not a nationwide outfit with a call center three states away. We’re owner-operated, locally owned, and Hal Gatewood has been at this since 2001. When someone in Broad Ripple calls with a gate that won’t latch after a freeze-thaw cycle, they’re talking to someone who has fixed that exact problem on Winthrop, Guilford, and Carrollton. Not a script reader.
Our Gate Parts & Welding team welds on site, in your driveway, so your gate stays where it belongs. We don’t haul it off to a shop you’ll never see. Every job carries the 90-Day Done Right Promise in writing. Not “up to” 90 days. Ninety days, and if it’s not right, one call brings Hal back. No runaround.
We answer the phone 24/7. A live person. Hal, or someone on his crew. Background-checked, uniformed, and certified to work on nine major gate brands. We cover Broad Ripple with no trip charge inside the county, and we honor a permanent 10% discount for seniors and veterans. The price we quote is the price you pay, agreed before any work starts.
Our Gate Parts & Welding Services in Broad Ripple
Hinge Replacement
Broad Ripple’s Monon-facing gates chew through hinge pins and spring hinges in two to three years. That’s trail-pedestrian cycling, not backyard family use. We stock heavier-duty replacement hardware sized for that load, because a hinge rated for a suburban backyard in Fishers will oval out its screw holes in a single season on a Monon-adjacent gate in 46220.
Post Replacement
The White River floodplain keeps Broad Ripple’s soil moisture high, and Indiana’s freeze-thaw cycles heave posts out of plumb every winter. A post that was true in October can bind or unlatch a gate by March. We dig out the rotted section, set a new post below the frost line, and re-align the frame so the gate latsches square. Post replacement in Broad Ripple typically runs $350-$700 depending on depth and whether we’re working around roots from mature street trees.
Rail Repair
Older wood swing gates on Broad Ripple’s 1920s-1940s Craftsman bungalows have custom-width frames and hand-cut hinge pockets. When a rail rots or splits, you can’t just order a replacement panel from a catalog. We rebuild rails on site, sister in new lumber, and remortise hinge pockets so the gate hangs true. Fixing the panel without addressing the post means you’ll fix it twice, and we’d rather do it once.
Custom Welding
We weld custom steel brackets, repair cracked ornamental ironwork, and fabricate parts that don’t exist in any parts catalog. On a Craftsman bungalow lot backing the Monon near the 6100 block of Winthrop, we replaced a worn spring hinge on a hand-built wood swing gate whose latch pin had ovaled the strike plate from daily trail traffic. We remortised the hinge pocket, sistered a rotted stile, and upsized the hardware, then checked the post footing for frost heave and re-aligned the frame so the gate latched square and quiet. Custom welding in Broad Ripple generally runs $150-$450 depending on the bracket or repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Broad Ripple
We’re certified to service nine major gate brands, including Viking, Ghost Controls, and DoorKing. If you’ve got our Gate Motor & Opener in Broad Ripple or access system from one of those brands, we carry compatible parts and can usually have your gate working the same day. For Broad Ripple customers, that means no waiting on a part shipped from a warehouse in another state. We keep common hardware on the truck, and what we don’t have, we can get quickly through local suppliers.
Common Gate Parts & Welding Problems We See in Broad Ripple Homes
- Rotted hinge posts below grade. Elevated soil moisture from the White River floodplain accelerates rot, and posts that were plumb in October heave out of alignment by March. We reset and replace posts with the frost line in mind, not just the visible damage.
- Worn latch pins and strike plates on Monon-facing gates. Trail traffic cycles these gates far more than a typical backyard gate. Latch pins oval out strike plates in a couple years, and the fix is heavier-duty hardware, not another cheap pin.
- Custom-width wood frames that don’t match pre-fab panels. Broad Ripple’s older bungalows have hand-built gates with dimensions no catalog matches. When a stile rots, the repair is carpentry fabrication: sistering, remortising, and rebuilding rails.
- Wind-load failures on solid infill gates. Solid wood infill gates catch a lot of wind, and when posts are already compromised by soil moisture, a good storm can shear hinge screws or rack the frame. We see this most after spring thunderstorms roll through Broad Ripple.
Pricing for Gate Parts & Welding in Broad Ripple, IN
Here are honest ranges for Broad Ripple, and they match what we actually quote:
- Hinge replacement: $120-$280, depending on hardware and whether we need to remortise the pocket
- Post replacement (wood, set below frost line): $350-$700
- Rail repair or stile sistering: $180-$400
- Custom welding (brackets, gate frame repair, ornamental iron): $150-$450
- Full gate realignment after winter heave: $150-$325
The price is agreed before work starts, and we don’t change it at the door. We offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Broad Ripple
Beyond Broad Ripple itself, we cover Indianapolis, Lawrence, Fishers, and Cumberland. The same crew, the same 90-Day Done Right Promise, and the same live-person phone answer. If you’re in one of those cities and your gate is acting up, call and ask for Gate Parts & Welding service near Broad Ripple.
Serving Broad Ripple, IN - Our Local Coverage Area
We’re based in the Broad Ripple area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Broad Ripple
A Monon-facing gate in Broad Ripple sees near-daily trail-user cycling, not occasional family use. Hinge pins, spring hinges, and strike plates wear to failure in two to three years because the gate operates at trail-pedestrian volumes. In Fishers, the same hardware on a backyard gate lasts a decade. When we replace hardware on a Monon-facing gate, we size it for that load. If your gate is already sagging or the latch won’t catch, call (877) 610-2993 and we’ll look at it.
That’s Broad Ripple’s freeze-thaw cycle working on floodplain soil. The ground holds moisture, freezes, and heaves the post out of plumb over winter. By March, the gate binds or the latch misses the strike plate. The fix is resetting or replacing the post below the frost line and re-aligning the frame. Post reset calls are a spring ritual in 46220. Call (877) 610-2993 and we’ll get you scheduled before the next thaw cycle.
It depends on how far the rot goes. If the post is solid above grade and the rot is near the surface, we can sometimes sister in a section and remortise the hinge pocket. But if the rot extends below grade into the footing area, full replacement is the only fix that lasts. On older Craftsman gates in Broad Ripple, the post is often the original from the 1920s or 1940s. We’ll give you an honest answer, and the price is agreed before we start. Call (877) 610-2993 for a free evaluation.
Yes. We weld on site, in your driveway, and that covers custom steel brackets, cracked ornamental iron, gate frame repairs, and parts that don’t exist in any catalog. Broad Ripple’s older gates often have handmade iron details that can’t be ordered. We’ll weld, grind, and paint match as close as the original. Call (877) 610-2993 and tell us what broke. We’ll tell you if it can be welded or needs replacement.
Every automatic gate opener has Gate Access Control in Broad Ripple with a manual release mechanism, usually a keyed release or a pull handle on the operator itself. The correct procedure is: disconnect the operator first, then swing the gate by hand. Never force the gate while the operator is still engaged, and never reach through the gate to pull it from the other side. If you can’t find the release, or the gate feels bound after a storm, call (877) 610-2993. Storm seasons in Broad Ripple bring wind-load damage and power cuts, and we’ve talked plenty of homeowners through this over the phone. If it’s urgent, we’ll come out.
Contact Gatewood Fence & Gate
If you live in Broad Ripple and your gate needs work, you don’t need to drive around looking for a welding shop. Call (877) 610-2993. Hal will answer. He’ll give you a straight answer, a free estimate, and a written 90-Day Done Right Promise. You can also drive to the shop and look him in the eye. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Broad Ripple, IN since 2001.