Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bremerton
Gate parts and welding in Bremerton usually means one of three things: a hinge post that has rotted at grade, a gate that has sagged far enough to drag, or a weld that finally let go after years of salt air. We handle all three, and we do most of the work right in your driveway. Hal Gatewood has been fixing gates since 2001, and the crew you see on a job in Bremerton is the same crew that answers the phone. Call (877) 610-2993 and a live person picks up, any hour.
Why Gatewood Fence & Gate Is Bremerton’s Preferred Gate Parts & Welding Company
We’re not a franchise that parachutes in from three counties away. Gatewood Fence & Gate is locally owned, owner-operated, and Hal Gatewood’s name is on the shop and on every invoice. Bremerton homeowners tell us the same thing over and over: they got a phone quote from some big outfit, then a different number at the door. That doesn’t happen here. The price we give you is the price we write down, and the 90-Day Done Right Promise is stamped on the paperwork, not buried in fine print.
When a gate fails in Bremerton, we’re close by. We work in West Bremerton, Manette, and all the neighborhoods around the shipyard, and we know what the salt air does to hardware here. Our Gate Parts & Welding crew handles hinge replacements, post work, and on-site welding without hauling your gate off to some shop. The person who shows up is background-checked, uniformed, and answers to Hal directly. That’s the oldest accountability there is.
Our Gate Parts & Welding Services in Bremerton
Hinge Replacement
Hinges are where Bremerton gates fail first. The salt-laden marine air from Puget Sound eats zinc-plated hardware fast, and original strap hinges on 1940s and 1960s gates around Manette and West Bremerton have usually been painted over rather than replaced. That paint traps moisture and hides the rot underneath. We stock heavy-duty barrel hinges and weld-on strap hinges, and we can cut out the old hardware and weld in new pieces the same day. A typical hinge replacement in Bremerton runs $180 to $360 per hinge depending on access and how much cutting the old hardware needs.
Post Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. Bremerton’s clay soil heaves through the wet season, and a post that was set shallow in 1962 has been moving under your gate for sixty years. We dig out the rotted post, pour a new footing with Sonotube to get below the heave line, and set a new steel or pressure-treated post with proper concrete. Post replacement in Bremerton typically runs $450 to $850 per post, including footing and hardware remounting. If the post is leaning but the wood is still sound, we can often brace and weld reinforcement instead, which costs less.
Rail Repair
Slide gates on Bremerton properties take a beating from salt crust that builds inside the track rollers. When the rollers seize, the motor keeps pushing, and the rack or rail takes the damage. We repair segmented racks, replace worn pinion gears, and weld new rail sections when the old ones have been ground thin. For rail-mounted gates within a few blocks of the water, we recommend stainless or heavily galvanized rail sections because standard powdercoat fails in this environment. Rail repair work in Bremerton usually runs $300 to $700, with full rail replacement higher depending on length.
Custom Welding
Some things aren’t worth replacing. If your gate frame has a cracked weld, a missing picket, or a latch mount that tore loose, we weld it on site so the gate stays in your driveway. We do MIG and stick welding, and we’ll match the existing material whether it’s steel, aluminum, or wrought iron. Custom welding for gate repairs in Bremerton runs $150 to $400 for most single-point repairs; a full crack grind-out and re-weld on a large swing gate runs higher, and we’ll quote it before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bremerton
We service and stock parts for most of the operators you’ll actually find in Bremerton’s older neighborhoods: LiftMaster, FAAC, BFT, Linear, and Viking, among others. That matters here because a lot of the legacy units still running were installed in the 1980s and 1990s, and the local hardware stores don’t carry those control boards or limit switches anymore. We keep the common parts on the truck, so most repairs don’t wait on a parts order. If we don’t have it, we’ll tell you straight, and we’ll give you the real lead time, not a promise we can’t keep.
Common Gate Parts & Welding Problems We See in Bremerton Homes
- Rotted hinge posts on 1940s-1960s gates. The original posts were set right at grade with no gravel drainage, and Bremerton’s 55 inches of annual rain keeps the base wet nine months a year. We see the same failure in West Bremerton and Manette over and over: the post looks fine from above, then snaps the first time the gate swings with any force.
- Salt-corroded hinges and latch hardware. Hinges that would last 12-15 years in Silverdale fail in 7-8 years here because of the salt-laden air off Puget Sound. The hinge pin rusts thin, the strap cracks, and the gate drops mid-swing, usually when someone’s already late for the ferry.
- Seized slide-gate rollers near the water. Salt crust builds inside the track rollers on rail-mounted gates, the motor overloads trying to push through it, and the transformer burns out. We see this on properties within sight of the inlet all year long.
- Legacy operator boards shorting from moisture. Original LiftMaster and FAAC control boards in West Bremerton homes short out after years of damp marine air seeping through the enclosure. The gate quits, the keypad goes dead, and a lot of landlords don’t find out until a tenant finally reports it.
Pricing for Gate Parts & Welding in Bremerton, WA
Here’s the honest version. Hinge replacement in Bremerton runs $180 to $360 per hinge. Post replacement runs $450 to $850 per post when we’re digging out the old one and pouring a new footing. Rail repair runs $300 to $700 for most jobs. Custom welding runs $150 to $400 for a typical single-point repair. The exact number depends on access, the age of the gate, and how much of the old hardware has to be cut out. What it never depends on is how much we think you’ll pay. The price is quoted and agreed before any work starts, in writing. We offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a real number.
We Also Serve Cities Near Bremerton
Our Bremerton customers come from neighborhoods across 98311, 98312, 98314, and 98337, and we regularly run jobs in Manchester, Tracyton, East Port Orchard, and Parkwood. If you’re just outside the city and your gate’s been sagging for months, don’t keep putting it off. We’re already in the area most weeks, so getting to you isn’t a special trip.
Serving Bremerton, WA - Our Local Coverage Area
We’re based in the Bremerton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bremerton
Yes, and that’s not an opinion, it’s what we see every week. The salt-laden air from Puget Sound corrodes zinc-plated hardware about twice as fast as the same hardware installed a few miles inland. A galvanized hinge that holds up for 12-15 years in Silverdale will often fail in 7-8 years in Bremerton, especially within a few blocks of the water. You can extend that by switching to stainless hardware on your next replacement. Call (877) 610-2993 and we’ll take a look at what you have.
Sometimes, yes. If the post is leaning because of soil movement but the wood below grade is still solid, we can weld a steel brace from the post to a new concrete-embedded anchor, which costs less than full replacement. But if the post is rotted through at the base, welding a brace to the top just moves the failure point. We’ll tell you which one you have after we dig down a few inches. A brace job in Bremerton usually runs $250 to $450; you get a straight answer before we touch anything.
The most likely cause is moisture ingress into the control board, which is a common failure on legacy LiftMaster units in West Bremerton. Damp marine air gets through the enclosure seal, and once moisture reaches the board, the gate quits responding to the keypad and the remote. In some cases the board can be dried and the enclosure re-sealed; in others the board has to be swapped. We’ll diagnose it in person and tell you what the cheaper fix is. Call (877) 610-2993 and we’ll come out.
In most cases, retrofitting is the less expensive answer. A solid 1960s gate frame can be fitted with new hinges, a safety photocell, and an updated operator for less than building and hanging a new gate from scratch. The exception is when the hinge post has rotted through and the gate panel itself is rusted along the bottom rail. Once the frame’s compromised, you’re paying to fix what’s already failed, and replacement becomes the cheaper option over five years. We’ll lay out both numbers plainly, and the estimate is free.
Open the gate and look at the gap between the latch side and the post at the top and bottom. If the gap is wider at the top, the hinge post is leaning. If the gate still drags with an even gap, the panel itself is racked, which means the welds or rail joints have shifted. In Bremerton’s clay soil, leaning posts are far more common than racked panels, but we’ll confirm it on site before recommending any work. Call (877) 610-2993 and we’ll tell you what you’re actually dealing with.
If your gate’s been sagging, dragging, or not latching for a while, don’t wait until it drops on someone’s car or a kid slips through. Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate. We answer live, 24/7, and we’ll show up when we say we will.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bremerton and Kitsap County with on-site welding and gate repair since 2001.