Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Boulder City
If your gate is sagging, snapping, or simply refusing to open, we can get to Boulder City quickly. Our shop is down the road, our welder rides in the truck, and most hinge, post, and rail repairs happen in a single visit. Call (877) 610-2993 and a live person answers - not a recording.
We’ve worked on enough Boulder City gates to know the difference between a 1940s bungalow gate in the historic district and a mid-century ranch gate on the caliche flats. The house tells you what you’re dealing with before you ever touch the panel. Our Gate Parts & Welding team carries the parts and the welding rig to fix it right where it hangs, without hauling your gate across town.
Why Gatewood Fence & Gate Is Boulder City’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop, the truck, and every invoice. When Boulder City homeowners call about a gate that won’t latch or a hinge post that’s leaning, they get the person who will actually do the work on the phone. That matters when you’ve already been burned by an outfit that quoted one price and charged another at the door.
We serve Boulder City regularly, which means we’ve learned the quirks of the housing stock. The original gates near Nevada Way and Avenue B are often period wrought iron with scrollwork you can’t buy off a shelf. The ranch homes from the 1960s and 70s tend to have tubular steel gates with posts set in caliche hardpan. Both need someone who knows what’s under the surface before the first cut or weld.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings us back - no fine print, no runaround. Plus, our price is quoted and agreed before any work starts. You’ll never see a bigger number on the invoice than the one you approved.
Our Gate Parts & Welding Services in Boulder City
Most of the work we do in Boulder City falls into a few honest categories. Here’s what they actually involve.
Hinge Replacement in Boulder City
Hinges are the most common failure point on Boulder City gates. The combination of 110°F summer heat and 40-degree temperature swings between day and night causes steel hinge bolts to work loose, then the gate starts dragging and the latch stops lining up. We replace worn hinge pins, weld cracked hinge leaves, and re-align the gate so it swings true. In the historic district, we match the original hinge style so the gate still looks like it belongs on a 1930s bungalow.
Post Replacement in Boulder City
A gate sags in the hinge post, not in the middle. That’s where we start. Boulder City’s caliche hardpan holds moisture against the base of steel posts, which accelerates corrosion at exactly the point where the post carries the most weight. Digging is not enough - caliche typically requires a rotary hammer or jackhammer to break through. We dig out the old post, set a new one in concrete, and re-hang the gate the same day. If the panel is still solid, replacing the post saves you the cost of a whole new gate.
Rail Repair in Boulder City
Top and bottom rails on older tubular-steel gates crack at the welds after years of desert heat cycling. A cracked bottom rail lets the gate twist, which puts more stress on the hinges and latch. We weld the crack, reinforce the rail, and repaint the repair so it disappears into the frame. Most rail repairs on a Boulder City property take a couple of hours, gate still hanging in place.
Custom Welding in Boulder City
Sometimes the part doesn’t exist anymore. We weld on site, in your driveway, so the gate stays where it belongs. That matters when you’re working on a 1940s wrought-iron gate with scrollwork that no parts catalog has carried in fifty years. We can reproduce ornamental details, extend a gate panel, fabricate a new frame, or build a custom latch mount. The welding is done by hand, by us, not subcontracted to a shop three towns over.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boulder City
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. If your Boulder City gate operator was installed in the 1990s or 2000s, there’s a good chance it’s a Linear or Viking board that’s now obsolete and no longer stocked anywhere. We keep common replacement parts on the truck for the brands we see most, and we can source or retrofit the rest. That means fewer return trips and less time with a gate that won’t open.
Common Gate Parts & Welding Problems We See in Boulder City Homes
Boulder City’s housing stock and climate produce a very specific set of gate problems. These are the ones we see most.
- Hinge posts corroding at the base. Caliche hardpan traps water against steel posts, so the post rots at ground level while the gate panel itself stays solid. The gate drops, the latch misses, and the panel starts scraping the driveway.
- Legacy operators without safety sensors. Operators from the 1990s often lack photocells or edge sensors. When a board fails, it can’t be repaired - but you don’t have to replace the whole gate. We retrofit UL 325-compliant safety edges and photo-eyes and keep the existing gate frame.
- Fatigue cracks in ornamental welds. The 40-degree diurnal temperature swing in the Mojave cycles steel welds every single day. After decades, ornamental scrollwork on historic district gates develops hairline cracks that eventually snap. This is repairable with careful welding, but it should not be put off.
- Worn rollers on slide gates. Boulder City’s hard, dry soil kicks up fine dust that grinds into roller bearings on slide gates. Rollers seize, the gate scrapes along its rail, and the operator motor burns out trying to push it. Replacing rollers early is a lot cheaper than replacing the motor.
Pricing for Gate Parts & Welding in Boulder City, NV
Boulder City gate repair is priced honestly, with the number agreed before we start. A typical hinge replacement runs $180-$320 depending on how many hinges and whether the post needs re-alignment. Post replacement, with caliche excavation, usually lands between $450 and $850 per post. Custom welding work like crack repair or scrollwork matching typically runs $120-$250 per weld point, and a full rail repair averages $200-$400. Legacy operator retrofits with new safety sensors are usually $350-$650.
Those are real ranges for this market, not national averages. Your exact price depends on the condition of the existing structure, how deep the caliche runs, and whether we’re matching historic details. Every estimate is free, and we honor the price we quote. The $40-off-any-repair-over-$200 offer applies in Boulder City, as does the permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a number before any work starts.
We Also Serve Cities Near Boulder City
While this page speaks to Boulder City, our crews also cover Henderson, Whitney, Paradise, and Enterprise. Same local shop, same 90-Day Done Right Promise, same live person on the phone at (877) 610-2993.
Serving Boulder City, NV - Our Local Coverage Area
We’re based in the Boulder City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Boulder City
It depends on your property’s designation, but yes, for contributing historic properties in the district near Nevada Way and Avenue B, visible exterior gate changes can trigger design review by Boulder City’s preservation board. A functional hinge repair that matches the existing style is usually treated as maintenance, but changing the gate’s appearance - altering scrollwork, switching from wrought iron to modern steel, or replacing a period gate entirely - can require approval. We know the process and can help you figure out what’s needed before you spend money. Call (877) 610-2993 and we’ll talk it through.
The caliche hardpan in Boulder City’s soil is the main culprit. It is rock-hard alkaline soil that traps moisture against the base of the post, so corrosion eats through the steel at ground level. Las Vegas has more mixed soil and less of the same hardpan profile, so posts there often fail from lateral movement instead of base corrosion. Boulder City posts also get the same 40-degree daily temperature swing, which stresses the connection between post and gate every afternoon. Replacing a post in Boulder City usually means chipping through caliche - that’s normal here, and we come ready for it.
No, and nobody else can either, because Linear stopped making those boards years ago. What we can do is retrofit a modern operator or control board onto your existing slide gate frame, adding the safety photocells and edge sensors that were never installed back then. The gate itself may still be perfectly good. Replacing an obsolete board with a retrofitted modern control is often the cheapest fix, and it brings the gate up to current UL 325 safety standards. Call (877) 610-2993 for an exact quote.
Most of the time, just the hinge post. A gate sags because the post it hangs from has moved or corroded, not because the panel bent in the middle. We check the post first, and if it’s solid, we re-align the hinges and tighten or replace the hardware. If the post is failing, we replace the post and re-hang your existing panel. You only need a new gate panel if the panel itself is cracked, twisted, or rotted through - and we’ll show you exactly what we’re seeing before quoting replacement. Call (877) 610-2993 and we’ll come look for free.
That is almost always an overheated or failing battery, not the keypad. Boulder City summers routinely hit 110°F, and a solar panel that charges fine in March may be outputting reduced voltage by mid-July. The keypad sends its signal, but the operator doesn’t have the stored power to run the motor. The fix is usually a battery replacement or a panel repositioning, not a new keypad or operator. Give us a call at (877) 610-2993 and we’ll diagnose it over the phone, then set it right in one trip if it needs a visit.
Now, About That Historic Gate Near Nevada Way
Here’s something that only applies in Boulder City: the historic preservation overlay can require design review before any visible gate work on contributing properties near Nevada Way and Avenue B. That step simply does not exist for the same gate repair in Henderson or Las Vegas. If you live in the historic district and your wrought-iron gate is snapped at the ornamental weld, you cannot just swap in a modern steel panel. The city may ask you to match the original character, and some changes need approval before they happen.
We’ve been through this with Boulder City homeowners before. On a 1940s bungalow near Avenue B, our crew replaced a worn hinge post set in caliche hardpan. A rotary hammer chipped through the rock-hard soil while we matched the original wrought-iron scrollwork with custom welding to satisfy the city’s historic review. The original gate operator was an obsolete DoorKing board that lacked safety photocells, so we retrofitted a UL 325-compliant photo-eye pair and retained the period-correct gate frame. The gate still looks like it belongs on that house. That’s the point.
The honest truth about legacy gates in Boulder City is this: some parts are worth repairing, and some aren’t. An obsolete control board can’t be repaired - no one can resurrect a board out of production for 20 years. A cracked ornamental weld can be fixed and will hold for another decade. A post rotted through at the base needs replacement, full stop. We’ll tell you which is which, and we’ll show you the failed part before we quote the fix. That’s how it should work.
Call Boulder City’s Gate Repair Shop That Answers the Phone
If your gate is sagging, snapping, or stuck halfway open, call (877) 610-2993. Hal Gatewood has been doing this since 2001, and his address is published, his license is verifiable, and his phone is answered by a live person around the clock. No voicemail, no call center, no chatbot. We’ll give you a straight answer, a free estimate, and a written price before any work begins. The name is on the shop, and the shop is down the road - that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Boulder City since 2001.