Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Boardman
Gate parts and welding in Boardman usually means fixing what was installed between 1948 and 1975. The hinge posts, ornamental iron, and operators on those gates are now 50 to 70 years old, and they fail on a compressed timeline. That’s the work we do. Hal Gatewood has been at this since 2001, and our Gate Parts & Welding crew knows Boardman’s post-war housing stock better than any out-of-town outfit ever will. We weld on site, replace posts the right way, and answer the phone when you call. For a free estimate, call (877) 610-2993.
Why Gatewood Fence & Gate Is Boardman’s Preferred Gate Parts & Welding Company
Our customers in Boardman don’t want a lecture about their gate; they want it fixed. They want someone who knows that a ranch home off Market Street probably has a 1960s chain-link gate with an 18-inch footing that heaves every spring. Hal’s name is on the shop, and he stands behind every job with a 90-Day Done Right Promise in writing. If it’s not done right, one call brings him back. No runaround, no fine print, no hedging.
We’ve been locally owned and owner-operated since 2001, with a published address and license number anyone can look up. Hal lives in this region and works in Boardman regularly, which means you might see him at the hardware store, not just on a job ticket. Calls ring to a live person 24/7, not a voicemail or a call center three states away. Our crew is background-checked and uniformed, and the person who shows up at your door is the same person who quotes the work.
Our Gate Parts & Welding Services in Boardman
Key takeaways:
- Post replacement that accounts for Boardman’s freeze-thaw cycles and shallow 1950s-70s footings
- On-site welding for ornamental iron gates, so the gate stays in your driveway
- Hinge and latch alignment tied to Mahoning County’s permit path for post work
- Free estimates, upfront pricing agreed before any work starts
Hinge Replacement
Boardman’s original ornamental iron hinges and pintles have been eating road-salt spray for five to seven decades. We routinely find hinge barrels rusted thin around the pin, especially on gates facing South Avenue or 224 where winter salt sits in the air. We replace hinges with self-aligning units and weld them in place on site. A hinge replacement in Boardman typically runs $85-$220 per hinge, depending on the gate’s weight and whether the post needs shimming to re-establish plumb.
Post Replacement
This is the repair we see most in Boardman. The post-war homes here were built fast, and many gate posts went into concrete footings only 18 to 24 inches deep. A Mahoning County winter with 40 freeze-thaw cycles moves those footings a fraction each year, and by year 50 the post leans enough that the gate scrapes or won’t latch. We pull the old post, pour a new 36-inch sonotube footing with gravel drainage, and set a new post in plumb. Post replacement in Boardman typically runs $350-$750 per post, including the new footing and concrete disposal.
Rail Repair
When an ornamental iron gate sags, the panel usually isn’t the problem. The post is. But after decades of movement, top and bottom rails often crack at the hinge stile or the welds fail at the picket connections. We grind down the crack, weld it solid, and reinforce with a gusset where the gate’s weight dictates. Rail repair in Boardman runs $95-$280 per rail, and we always check the post before we weld, because fixing the rail without checking the post means you’ll fix it twice.
Custom Welding
Some Boardman gates are worth saving, and saving them means custom welding. We fabricate replacement pickets, rebuild scrollwork, extend gates to close a widened driveway gap, and adapt modern hinges to 1960s gate frames. We weld mobile, at your address, with a rig that carries the right rod and shields for the job. Custom welding in Boardman runs $120-$450 depending on scope; we quote the job before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boardman
We’re certified to service nine major gate brands, and Boardman’s stock leans heavily toward legacy LiftMaster, FAAC, and Viking operators. Many of those units were installed in the 1980s and 1990s. We keep common control boards, limit switches, and arm hardware on hand or sourced within a day, so a Boardman job doesn’t stall waiting on a part from a distributor in another state. If you have an old BFT or Linear opener that’s acting up, we can usually tell you over the phone whether it’s worth repairing before we ever roll a truck.
Common Gate Parts & Welding Problems We See in Boardman Homes
- Post heave and lean every spring. Shallow concrete footings from the 1950s-70s move with each freeze-thaw cycle, and by March the gate’s out of plumb. Latch bars miss the strike plate, and swing gates scrape the driveway.
- Rust-corroded hinges and pintles. Salt from Boardman’s high-traffic corridors works into hinge pins and barrels, thinning the steel until the gate droops off the post. You see this most on Market Street and South Avenue corridors.
- Obsolete control boards on early automatic operators. Legacy LiftMaster and older FAAC units lack modern UL 325 entrapment protection, and many can’t be safely retrofitted. We’ll tell you honestly when a newer board with proper safety edges is the right call.
- Latch bars and locks that fail after a hard winter. When a post moves even a quarter inch, the latch geometry goes with it. We realign, shim, and replace strike plates so the gate actually stays shut.
Pricing for Gate Parts & Welding in Boardman, OH
Here’s what we charge in Boardman, honestly and up front. Hinge replacement runs $85-$220 per hinge. Post replacement runs $350-$750 per post, including the new footing and concrete disposal. Rail repair runs $95-$280 per rail. Custom welding runs $120-$450 depending on scope. Your price is quoted and agreed before any work starts, so the invoice never surprises you at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. A free second opinion on any written estimate is yours for the asking.
We Also Serve Cities Near Boardman
We work throughout the Mahoning Valley, from Youngstown and Struthers to Canfield and Campbell. If you’re just outside Boardman, call anyway - a live person answers, and we’ll tell you straight whether the drive makes sense. For Gate Parts & Welding in Boardman and surrounding towns, the phone number is (877) 610-2993.
Serving Boardman, OH - Our Local Coverage Area
We’re based in the Boardman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Boardman
Because the hinge post is moving, not the panel. Boardman’s 1950s-70s homes were built with shallow gate footings, often 18 to 24 inches deep, and the Mahoning Valley’s freeze-thaw cycling heaves those footings every winter. By spring the post leans inward, the panel drops, and the gate scrapes or misses the latch. The fix is a new post set in a deep footing with proper drainage, not a shim under the hinge. Call (877) 610-2993 and we’ll come look at it - estimates are free.
Usually it can be welded. We repair 50-70-year-old ornamental iron gates all over Boardman, and most of them have solid bones. The failures we see are at hinge welds, cracked rails, and rust-thinned stiles, and those are repairable on site. The exceptions are gates where the bottom rail has rusted through across multiple sections or the post has rotted below grade. We’ll tell you honestly which one you have. Call (877) 610-2993 for a straight answer and a free estimate.
Sometimes, but not always safely. If your operator lacks modern UL 325 entrapment protection, a replacement board won’t bring it into compliance, and we won’t install a board that leaves a dangerous gate in your driveway. We service legacy LiftMaster, FAAC, and Viking units in Boardman, and we’ll quote both the repair and a modern operator with safety edges if retrofit isn’t sensible. Call (877) 610-2993; we’ll give you the honest math on both options.
Boardman is an unincorporated township, so gate and fence permits fall under Mahoning County’s jurisdiction rather than a city building department. When post replacement requires a new footing, the county’s code path applies. Out-of-area contractors often miss this and stall a job for weeks. We navigate it routinely and handle the permit path as part of the work so your gate isn’t sitting in the driveway for a month. Call (877) 610-2993 and we’ll walk you through it.
Because the post moved. Boardman logs 40 or more freeze-thaw cycles in a typical winter, and the ground shifts every time. That movement translates to the post, and a quarter inch there becomes a half inch at the latch bar. The fix is usually a post reset or a hinge adjustment, not just bending the strike plate. We’ll come out, find the actual movement, and fix what’s causing it. Call (877) 610-2993 for a free estimate.
Why Boardman’s Gates Fail the Way They Do
Boardman’s residential footprint was built almost entirely between the late 1940s and mid-1970s, as Youngstown’s middle class moved out and ranch homes and split-levels went up fast. That compressed growth era means thousands of driveway gates across the township are now 50 to 70 years old, and they’re failing on the same timeline, not gradually one at a time. The hinge posts, concrete footings, ornamental iron, and early operators all aged together, and the Mahoning Valley’s aggressive freeze-thaw cycling each winter accelerates everything. Post heaving and hinge misalignment are the dominant repair pattern here because of how and when Boardman was built, not random bad luck.
On a street of 1960s ranch homes off South Avenue, our crew pulled a badly sagging ornamental iron swing gate where the hinge post had leaned inward from decades of freeze-thaw movement on a shallow 18-inch footing. We cut the post, poured a new 36-inch sonotube footing with proper drainage, re-hung the gate with new self-aligning hinges, and replaced the worn latch. The operation’s existing LiftMaster unit then cycled cleanly, no replacement needed. That’s the honest retrofit we aim for in Boardman: fix what’s actually broken, leave what’s still good, and don’t sell a new gate when the old one has another 30 years in it.
Call Gatewood Fence & Gate for Gate Parts & Welding in Boardman
If your Boardman gate sags, won’t latch, or has an operator that stopped mid-cycle, call us. Hal Gatewood has been fixing gates since 2001, his name is on the shop, and the 90-Day Done Right Promise is on every invoice. We answer the phone with a live person 24/7, we quote the price before any work starts, and we’ll come to your Boardman driveway to weld, set posts, or replace what’s genuinely worn out.
For a free estimate, call (877) 610-2993. If you’ve got a written estimate from someone else, bring it; we’ll give you a second opinion free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Boardman since 2001.