Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Billerica
Gate parts and welding in Billerica usually means one of three things: a hinge post that has heaved out of plumb, a weld seam that finally let go on a forty-year-old iron gate, or a roller bracket that road salt has eaten through. We handle all three, and we do the welding right in your driveway so the gate never leaves your property. Hal Gatewood has been fixing and welding gates since 2001, and our crew knows the Concord River lowlands, the Route 3 corridor, and the tight shared driveways off Rangeway Road like the back of our hands. Call (877) 610-2993 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Billerica’s Preferred Gate Parts & Welding Company
We are not a franchise. Hal Gatewood owns the shop, his name is on every invoice, and when you call about a sagging gate in Billerica, the person who answers can tell you exactly what a frost-heaved post looks like in 01821 versus 01822. That matters here because Billerica has a soil problem that most gate companies from out of town do not understand until they are ankle deep in it. Posts set near the Concord River sit in saturated, frost-susceptible ground that moves them an inch or more every hard winter. A crew that does not know this will swap a hinge, tighten a rail, and be gone, leaving you with the same lean by April. We re-plumb the post, set the footing deeper when the site calls for it, and weld the gate square so it actually stays.
Every job gets our 90-Day Done Right Promise in writing. If something is not right, one call brings us back. No runaround, no fine print. Billerica homeowners deal with enough. We also answer the phone with a live person 24/7, which is to say Hal or someone from his crew, not a voicemail tree.
For our Gate Parts & Welding work across Billerica, that same promise applies whether we are welding a hinge, replacing a post, or converting a swing gate to a slide gate in a shared driveway. And when we serve Billerica, we schedule around the access you actually need, school runs included, not just our own convenience.
Our Gate Parts & Welding Services in Billerica
We carry parts for just about every gate style you will find in Billerica, but our real advantage is that we weld on site. No hauling your gate to a shop across town, no two-week wait while it sits in a queue. These are the jobs we do most in Billerica:
Hinge Replacement
Old Billerica gates, especially the 1960s to 1980s wrought-iron and chain-link ones, fail at the hinge first. The post shifts, the weld cracks, and the gate starts dragging. We cut out the old hinge, weld in a new one rated for the gate’s actual weight, and re-set the post if it has moved. In 01821 and 01822, hinge replacement is nearly always a welding job, not a bolt-on fix.
Post Replacement
A gate sags in the post, not in the middle. When a post near the Concord River has heaved or rotted, replacing the gate panel without fixing the post means you will be calling us again next spring. We dig out the old footing, set the new post below the frost line where the site allows, and weld the gate back square. This is the single most common structural repair we do in Billerica’s river-adjacent neighborhoods.
Rail Repair
Impact damage, rust, and years of freeze-thaw stress tear apart rails on older Billerica gates. We weld cracked rails, reinforce bent sections, and when the metal is too far gone, we cut and weld in new rail stock that matches the existing profile. The repair is structural, not cosmetic, because a patched rail on a working gate fails fast.
Custom Welding
Not every gate problem has an off-the-shelf part. When a post is in a strange spot, a shared driveway has no room for a standard swing gate arc, or an old gate has odd dimensions, we fabricate brackets, extend posts, build slide tracks, and weld whatever the job requires. On a shared driveway off Rangeway Road, we re-plumbed a frost-heaved hinge post on a 1970s wrought-iron swing gate, then welded a new LiftMaster gate operator bracket after the sag correction revealed a failing rail support. The residents needed vehicle access every morning for school and work, so we kept the pedestrian gate operable by welding a temporary safety photocell mount while the main gate was down. That is the kind of problem you cannot solve with a parts catalog.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Billerica
We service and stock parts for DoorKing, Linear, and Viking gate operators, along with LiftMaster, FAAC, BFT, Ghost Controls, Elite, and Mighty Mule. If your Billerica gate runs on something we do not keep on the truck, we can usually have it from our local supply chain within a day. We would rather weld a correct bracket than force a mismatched one, and we never swap in a part that does not belong just to finish the job.
Common Gate Parts & Welding Problems We See in Billerica Homes
- Frost-heaved hinge posts. The saturated soils near the Concord River move posts an inch or more per winter. The gate looks fine in November and drags by March. Re-plumbing or deeper footings are the only real fix.
- Road-salt corrosion on rollers and rack teeth. Gates along Route 3 and 3A, and the commercial slide gates serving Route 3 corridor facilities, get blasted with salt spray every winter. Rollers seize, pinion teeth wear, and brackets rust through by spring. We keep replacements in stock for Billerica’s spring repair rush.
- Weld seam fatigue on 40-60 year old iron gates. The bulk of Billerica’s housing stock went up between the 1960s and 1980s. Those original driveway gates have now seen four or five decades of New England winters. Old welds crack where the gate flexes, and the fix is cutting out the failed seam and welding it properly.
- Restricted shared-driveway footprints. Many Billerica homes share a drive or have tight setbacks. A leaning post or loose rail blocks both vehicle and pedestrian access at once. Sliding gate conversions are common here because a swing gate simply will not clear the space.
Pricing for Gate Parts & Welding in Billerica, MA
Hinge replacement on a standard Billerica residential gate runs $180 to $380 per hinge, including on-site welding. A full post replacement with new concrete footing runs $450 to $900 depending on depth, access, and whether the site sits in a wetland-buffer zone near the Concord River. Rail repairs run $150 to $400 depending on how much rail stock we have to cut and weld. Custom welding is quoted by the job after we see the gate and the space. Gate roller replacement for slide gates runs $120 to $300 per roller, with brackets welded rather than bolted when the metal will allow it. Every price is quoted and agreed before we start. You will not get a call saying “it was worse than we thought.” If it was worse, we say so up front and you decide before we touch it. Call (877) 610-2993 for a free estimate, and ask about the $40 off any repair over $200 and the permanent 10% senior and veteran discount.
We Also Serve Cities Near Billerica
We work throughout Pinehurst, Tewksbury, Wilmington, and Burlington. If your gate is in one of those towns, the same crew, the same 90-Day Done Right Promise, and the same live-answer phone apply. The frost-heave problems we see along the Concord River in Billerica show up differently in the higher, better-drained ground in Wilmington and Burlington, and we plan the repair accordingly.
Serving Billerica, MA - Our Local Coverage Area
We’re based in the Billerica area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Billerica
The answer is almost always a footing set too shallow for Billerica’s frost-susceptible soils near the Concord River lowlands. Frost depth here reaches three to four feet in hard winters, and saturated ground heaves shallow footings every freeze-thaw cycle. If your post was replaced without going deep enough or adding proper drainage, the lean will return. We set posts below the frost line where site conditions allow and check the drainage around the footing. Call (877) 610-2993 and we will look at it before you pay anything.
Yes, and we do it regularly. Many Billerica shared driveways off roads like Rangeway Road and Treble Cove Road have no room for a swing gate arc. We weld a slide track system, install the gate rollers, and set the cantilever or track as the space allows. The neighbor’s access stays open during the whole job. Free estimate first, price agreed before work starts.
It is the hinge-to-post weld, followed closely by the mid-rail weld where the gate flexes every time it opens. On 1960s to 1980s gates, those original welds have now cracked from decades of freeze-thaw stress and the extra load of a post that is no longer plumb. We cut out the broken seam and weld fresh, then re-set the post if it has moved. The fix is structural, not a surface patch.
Yes. Billerica’s Route 3 corridor is dense with defense and technology facilities, many running commercial slide gates and automated access control. Road salt from Route 3 and 3A eats roller brackets and rack teeth every winter. We weld new brackets on site, replace rollers, and service the operator so the gate runs reliably into the next season. Commercial calls get the same live-answer phone and the same 90-Day Promise as a residential driveway gate.
Usually yes. If the opener is pushing a gate that has gone out of square, the problem is almost always a post that has heaved or a weld that has cracked, not the operator itself. We weld the gate square, re-plumb or replace the post, and only then adjust the opener. Fixing the opener first is exactly how you burn out a motor that was never the problem. Call (877) 610-2993 and describe the scrape. We will tell you straight whether it is a post job or a weld job before we even come out.
Call Gatewood Fence & Gate for Gate Parts & Welding in Billerica
If your gate is sagging, sticking, cracking, or eating openers, call (877) 610-2993. Hal Gatewood has been at this since 2001, the shop has a published address, and the person who answers the phone can actually talk through your gate problem. We will give you a free estimate, we will tell you if the gate can be welded or if a post has to come out, and the price you agree to is the price on the invoice. No trips charges inside the county, no surprises, and a 90-Day Done Right Promise on every job. Call now or stop by the shop and look us in the eye.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Billerica since 2001.