Gate Parts & Welding in Artondale - Made to Measure, Written Price

Fast, Reliable Gate Parts & Welding Across Artondale

Gate parts and welding in Artondale usually comes down to a straight question: can the gate be saved, or is it past saving? Most of the time it can be saved. A rotted post gets cut out and a new steel footing welded in. A sagging hinge gets replaced, not patched. Hal Gatewood has been fixing gates since 2001, and he’d rather repair your gate in the driveway than sell you a new one you don’t need. If you’re in Artondale and your gate is leaning, dragging, or dead at the opener, call (877) 610-2993. A live person answers, day or night, and you’ll get a straight answer before anyone shows up.

Call (877) 610-2993

Artondale is different from the flat, open subdivisions across the Narrows. The tree canopy keeps everything wet well past the last rain, and that changes how gates fail here. This page tells you exactly what we see on wooded peninsula properties, what it costs, and what’s worth fixing versus replacing.

Why Gatewood Fence & Gate Is Artondale’s Preferred Gate Parts & Welding Company

We’re locally owned and owner-operated. Hal Gatewood’s name is on the shop and on every invoice, and that has been true since day one. He has a published address and a license number anyone can look up. When a gate sags in Artondale, the problem usually starts at the hinge post, not in the middle of the gate. That’s where our crew starts too. We don’t swap parts that don’t need swapping, and we don’t haul your gate off to a shop unless there’s a good reason. The welding happens on site, in your driveway, on your schedule.

Gate Parts & Welding is a core part of what we do, and we’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.

We answer the phone with a live person 24/7. Not a voicemail, not a chatbot, not a call center three states away. When you call about a gate off its hinges in Artondale, you talk to someone who understands what that means on a wooded lot off Ray Nash Drive NW. And we quote the price before the work starts and honor it. Always.

Our Gate Parts & Welding Services in Artondale

Hinge Replacement

Hinges fail fast in Artondale because salt-laden air off Hale Passage keeps working on exposed steel. Add in the near-constant shade and moisture, and you get stiff gates, squealing pins, and leaf edges that scrape the ground. Hinge replacement in Artondale typically runs $180 to $420 per hinge, depending on gate weight and whether the post needs reinforcement at the mounting point. We weld new hinge plates where the old ones have wallowed out, and we use marine-grade hardware on peninsula properties.

Post Replacement

This is the big one in Artondale. The clay-heavy, waterlogged soil under the conifer canopy rots wood posts at ground contact faster than almost anywhere else in Pierce County. A gate sags because the post is moving, not because the gate got weak. We cut out the rotted post, weld a new steel footing into the ground, and remount the gate so it swings true. Post replacement in Artondale runs $450 to $1,100 per post, depending on depth, soil condition, and gate weight. We set posts in concrete with proper drainage so you’re not doing this again in five years.

Rail Repair

Wood gates on post-and-rail construction split and crack at the rail joints, especially where water sits in the grain. We repair or replace the rail, weld steel support brackets where needed, and straighten the whole assembly. Rail repair in Artondale typically runs $190 to $480, depending on the gate’s size and how much of the frame has to be rebuilt. Most jobs are done the same visit.

Custom Welding

Not every gate problem has a part number. When a post mount is rusted through, a leaf is cracked at the weld, or an older gate predates modern hardware, we fabricate the fix on site. Custom welding in Artondale runs $150 to $600 for most repairs, with a free written estimate before any work begins. Hal carries a mobile welder on the truck to Artondale, so the gate stays in your driveway and the repair gets done right where it hangs.

Trusted Brands We Service in Artondale

We service and stock parts for the gate operators most common in Artondale, including FAAC, BFT, Linear, and Viking. Older swing gate operators from the 1990s and early 2000s are still all over this area, and control boards fail long before the mechanical hardware does. We keep retrofit kits on hand for those legacy units and can usually have your opener running the same day. If your operator is a brand we don’t stock, we can order it. But in Artondale, FAAC and BFT hydraulic operators are the ones we see most on the wooded driveways this community is known for.

Common Gate Parts & Welding Problems We See in Artondale Homes

• Rotted wood hinge posts: Artondale gets over 50 inches of rain a year, and the dense conifer canopy means the ground at the post footing rarely dries out. Posts rot at ground contact, gates sag into the latch post, and the fix is a new post, not a new gate.
• Fouled safety photocells: Moss, lichen, and fallen fir needles accumulate on photo-eye lenses and slide gate tracks all year here. This triggers false entrapment stops on UL 325-compliant operators, and it happens on a schedule you don’t see in drier, open-lot suburbs.
• Corroded hinges and rack drives: Salt-laden air off Hale Passage and Puget Sound to the east accelerates oxidation on exposed steel. Hinges get stiff, rack-and-pinion drives wear early, and parts that would last 15 years in Tacoma need attention in 7 or 8 here.
• Obsolete control boards: A lot of Artondale gates were installed when the homes went in, 20 to 30 years ago. The operator’s control board dies before the gate does. We retrofit compatible boards instead of forcing you into a full operator replacement.

Pricing for Gate Parts & Welding in Artondale, WA

We Also Serve Cities Near Artondale

We work throughout Artondale and the surrounding peninsula communities. If you’re in Wollochet, Gig Harbor, Fircrest, or University Place, the same crew and the same 90-Day Done Right Promise apply. Call us and we’ll get you scheduled.

FAQs - Gate Parts & Welding in Artondale