Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Allentown
Gate parts and welding in Allentown usually means one of three calls: a sagging iron gate that scrapes the walk, a hinge post that’s leaning out of a brick pillar, or an old opener that still runs but won’t reverse when it hits something. We handle all three, and we do the welding right in your driveway instead of hauling the gate off to some shop. Hal Gatewood has been fixing gates since 2001, and the name is on the shop and on every invoice. If you live in the West End, South Side, or anywhere in the 18103 and 18104 ZIPs, call (877) 610-2993 and a live person answers. Not a voicemail. Not a call center. That matters at 7:30 on a Monday morning when your gate won’t open and the car is stuck inside.
Why Gatewood Fence & Gate Is Allentown’s Preferred Gate Parts & Welding Company
Allentown’s older neighborhoods are full of gates that were built to last a hundred years, and a lot of them have. The problem is the parts around them. Brick pillars heave in the freeze-thaw cycle, cast iron rusts from the inside out, and hinge posts set in clay soil lean a little more every winter. A crew from out of town sees a bent gate and quotes a full replacement. We see a hinge post that needs resetting, a mortise hinge that needs cutting out and re-seating, and a gate that still has decades left in it. That repair-first instinct is why our Gate Parts & Welding team gets called back to the same blocks year after year.
We’re not a franchise and we don’t run a rotating roster of subcontracted crews. Hal’s crew shows up in uniform, background-checked, and they know the difference between a 1920s wrought iron gate on Tilghman Street and a 2000s steel panel gate off Cedar Crest Boulevard. The work is different. The approach shouldn’t be the same.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print. Seniors and veterans get a permanent 10% discount. Inside the county, there’s no trip charge. And $40 comes off any repair over $200. Not because we’re running a special. Because that’s what honest pricing looks like when you’re local and you plan to stay local.
Our Gate Parts & Welding Services in Allentown
Hinge Replacement
In Allentown’s West End and South Side, we rarely swap a hinge without addressing what it’s attached to. A hinge that’s rust-fused into a 1920s brick pillar can’t simply be unbolted. We cut the old hinge free, clean out the mounting point, and often weld a reinforcing plate to the post before re-hanging the gate. If you’re in an older row home off Hamilton Street or a brick twin in the 18103 ZIP, expect a hinge replacement around $180-$340 depending on whether the post itself needs resetting. We quote that price before any work starts, and it doesn’t change at the door.
Post Replacement
Here’s what thirty-plus freeze-thaw cycles a winter does in Allentown: the clay-rich soil around a gate post expands and contracts until the post leans, the gate sags, and the latch no longer lines up. A post replacement in this market runs $450-$850 for a standard steel hinge post set in new concrete, and it’s the most common repair we do in the 18104 ZIP where original ornamental gates are still common. We set the post on the same visit, weld any brackets, and make sure the gate swings true before we leave. A gate sags in the hinge post, not in the middle. That’s where we start.
Rail Repair
Wrought iron railings and gate frames in Allentown take a beating from road salt splash on narrow city streets, especially near Cedar Crest Boulevard and the tighter blocks of the 18105 ZIP. We cut out rotted sections, weld in matching stock, and grind the repair smooth so it holds paint like the original. A typical rail repair runs $200-$400 depending on how far the corrosion has traveled. If the gate still has good bones, we fix the rail. We don’t sell you a new gate to make the job bigger.
Custom Welding
When we can’t source an exact part for a 1910s iron gate, we make one. Custom welding covers everything from fabricating a replacement finial to building a new latch catch that matches the original profile. In Allentown’s older neighborhoods, this is often the only way to preserve the look of a century-old gate without replacing it with something off a shelf. Custom welding typically runs $150-$500 depending on the piece. We’ll show you the price in writing before the welder fires up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Allentown
We service and stock parts for most major gate brands, and on Allentown’s older properties we see a lot of Linear, Ghost Controls, and DoorKing operators still doing daily duty. Some of those units date to the 1990s. We can usually keep them running if the control board and photo-eyes are still sound, and we stock common replacement boards and edge sensors so you’re not waiting on a shipped part. When a legacy operator isn’t worth saving, we’ll tell you straight and show you why on the spot. Fix the panel without the post and you’ll fix it twice. Same logic applies to an opener you’re patching every six months.
Common Gate Parts & Welding Problems We See in Allentown Homes
- Frost-heaved posts in clay soil. Allentown gets 30 or more freeze-thaw cycles a winter, and the region’s clay-heavy ground moves enough to lean a hinge post within two winters of a naive repair. We dig the old footing, set the post deeper, and add proper drainage so it stays put.
- Rust-fused hinges in brick pillars. Many West End gates are mortared directly into 1910s-1930s brick pillars. As the iron rusts, it expands and cracks the surrounding masonry until the whole post-to-gate connection is unstable. We cut the old hinge free and rebuild the connection properly.
- Legacy operators without entrapment protection. Pre-2000 LiftMaster and FAAC slide units on Allentown’s older properties often lack the UL 325 photo-eyes required today. A dead photo-eye isn’t optional to leave off. It’s a safety device. We retrofit them on nearly every legacy operator we service.
- Salt-corroded rollers and track. Narrow city streets in the 18103 and 18105 ZIPs mean road salt gets onto slide gate track and rollers every winter. Rollers seize, track gaps widen, and the gate starts grinding. We stock replacements locally and usually finish the same day.
Pricing for Gate Parts & Welding in Allentown, PA
Here are the ranges we’ve actually charged on Allentown jobs in the last year. Hinge replacement: $180-$340. Post replacement: $450-$850. Rail repair: $200-$400. Custom welding: $150-$500. Latch and lock replacement: $90-$220. Gate rollers: $120-$280. What moves the number is access, post condition, and whether we’re matching century-old ironwork or working with a modern steel panel. We quote the full price before we start. It doesn’t change at the door, and we don’t add trip charges inside the county. Call (877) 610-2993 for an exact quote. Estimates are free.
We Also Serve Cities Near Allentown
Our Gate Parts & Welding in Allentown work regularly takes us into Whitehall and Catasauqua to the north, Fullerton to the northeast, and Emmaus to the south. Same crew, same 90-Day Done Right Promise, same live phone answer. If you’re a few minutes outside the city line, we’ll still come out and look at the gate in person.
Serving Allentown, PA - Our Local Coverage Area
We’re based in the Allentown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Allentown
Your gate is sagging because the hinge post is moving, not because the gate itself is bending. Allentown’s clay soil heaves with every freeze-thaw cycle, and a shallow or undersized post footing will lean within two winters. The fix is resetting the post in a deeper footing with proper gravel drainage, then re-hanging the gate so it clears the walk. If someone has been tightening hinges or shimming the latch, that’s a bandage. Call (877) 610-2993 and we’ll tell you what the post is actually doing.
Yes, it’s repairable, and we do it regularly on West End row houses. The gate itself is usually fine. What fails is the connection: rust expands inside the mortar joint and cracks the brick around it. We cut the old hinge free, assess the pillar, reset the hinge post if needed, and repoint the brick so the gate hangs true again. This is a two-trade job that combines metal work and masonry, which is exactly the kind of thing suburban gate crews don’t expect. We plan for it on nearly every older Allentown call.
We can. The weld goes on the back side of the gate frame where it’s not visible from the street, and we match the finish so the new latch catch blends with the original ironwork. For gates from the 1910s through the 1930s, this is usually the cleanest way to get a working latch without bolting a modern bracket through a century of original material. A custom latch weld typically runs $150-$300. We’ll show you exactly where the weld will land before we strike an arc.
You need them, and it’s not negotiable from a safety standpoint. Photo-eyes are entrapment protection. They stop the gate if a person, child, or car is in the path. A motor that runs without them is a motor that can pin someone. We retrofit modern photo-eyes onto legacy Linear, Ghost Controls, and DoorKing units all over Allentown, and in most cases the old operator keeps working fine with the new safety gear wired in. That retrofit is usually $180-$300. Far cheaper than the alternative.
We cut the post free, break out the old section of slab, and pour a proper footing below the frost line before re-setting the post and re-pouring the sidewalk. In Allentown’s row home neighborhoods, especially on the South Side, the original concrete is often 60 to 80 years old and wasn’t poured with gate posts in mind. Bolting a bracket onto that old slab just kicks the problem down the road. We do it right the first time, and the 90-Day Done Right Promise backs it in writing. Call (877) 610-2993 and we’ll come look at the post before you spend money on a fix that won’t hold.
Contact Gatewood Fence & Gate in Allentown
If your gate is sagging, scraping, stuck, or just refusing to behave, call (877) 610-2993. A live person answers around the clock, seven days a week. We’ll schedule a time to come out to your Allentown home, look at the gate, and hand you a written price before any work begins. Free estimates, no trip charge inside the county, and $40 off any repair over $200. Hal Gatewood’s name is on the shop and on every invoice, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Allentown since 2001.