Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Alamo Heights
Gate parts and welding in Alamo Heights usually means one of two things: a wrought-iron hinge strap has snapped where it enters a 1920s limestone pillar, or a swing gate has sagged out of plumb because the Beaumont clay under the post footing shifted after a wet spring. A typical hinge replacement runs $220-$480 here, and post releveling with re-welding starts around $350-$700 depending on the pillar and the right-of-way. We fix the gate in your driveway, not ours. You don’t haul anything anywhere. Call (877) 610-2993 and you’ll get Hal Gatewood or someone on his crew, not a voicemail.
Why Gatewood Fence & Gate Is Alamo Heights’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and his name is still on every invoice. The Gate Installation - Alamo Heights work we do is the kind that gets inspected by a city with its own code enforcement department, separate from San Antonio’s, and that inspection layer drives away the drive-by outfits. We know what the inspector looks for on a shared right-of-way pillar east of Broadway, because we’ve been through it plenty of times. A live person answers the phone 24/7, and every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
Alamo Heights homeowners tend to notice details. An original wrought-iron pedestrian gate from 1938 isn’t something you replace with a powder-coated modern panel, and we won’t suggest that you do. We weld the broken section to match the original scrollwork, then repaint to blend. When someone calls us from Argyle Avenue or along Broadway, they’re usually calling because another company told them the gate couldn’t be saved. That’s the kind of work we like best. Hal’s shop is down the road, his address is published, and the person who shows up is the person whose name is on the truck.
Our Gate Parts & Welding Services in Alamo Heights
Hinge Replacement
Wrought-iron hinge straps snap at the weld point where they enter century-old limestone pillars because the original lead anchors have loosened over decades of clay heave. In Alamo Heights, the mature live oaks accelerate that movement in summer. We grind out the old weld, set new anchors into the limestone, and weld a replacement strap that matches the original profile. A new hinge on a 1920s-era swing gate in Alamo Heights typically runs $220-$480, including the on-site weld and paint touch-up.
Post Replacement
When a pillar itself has cracked or separated from the footing, re-hanging the gate won’t fix anything. We dig out the old post, pour a new footing at the right depth for the 78209 clay, and set the replacement post plumb before the gate ever goes back on. On shared driveways east of Broadway, we handle the permit the city requires, because a structural repair on a right-of-way pillar that isn’t permitted will get flagged. Post replacement in Alamo Heights generally runs $600-$1,400 depending on the column material and whether we’re matching limestone or brick.
Rail Repair
Bottom rails on older swing gates rust from the inside out, especially on gates that sit close to irrigated lawns. A rail that has thinned to the point of flexing needs to be cut out and replaced with matching bar stock, then re-welded into the picket pattern. We’ve done this on gates along Argyle Avenue where the original scrollwork had to stay intact. Rail repair for an Alamo Heights driveway gate usually falls between $300-$650.
Custom Welding
This is where Alamo Heights gates separate from anything you’ll find in the new subdivisions a mile away. Period wrought iron bends differently than modern mild steel, and matching the texture of a 1930s hand-forged scroll takes patience and a welder who has seen the old patterns. We weld on-site so the gate never leaves your property, and we match section profiles before we strike an arc. Custom welding for ornamental repair work in Alamo Heights starts around $180 for small scroll or picket repairs and runs up from there based on the section length. Every price is quoted and agreed before we start.
For a broader look at what we handle, see our Gate Parts & Welding work across the region. If you’re reading this from somewhere inside the 78209 ZIP, you’re already in the heart of Alamo Heights and we know these gates well.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alamo Heights
Most automated gates in Alamo Heights run FAAC or LiftMaster operators, and a surprising number of older BFT units are still in service on estate driveway gates needing Alamo Heights Gate Motor & Opener service. We’re certified to work on nine major brands and we keep common FAAC and BFT parts on the truck, which means a capacitor or limit switch swap doesn’t turn into a two-week wait. For Alamo Heights customers, having those parts locally stocked means most operator repairs finish the same visit.
Common Gate Parts & Welding Problems We See in Alamo Heights Homes
- Hinge straps snapping where they enter limestone pillars. The original lead anchors loosen as Beaumont clay heaves through wet-dry cycles, then the strap flexes at the weld point every time the gate opens. It cracks, rusts, and eventually parts. We re-anchor and re-weld rather than replacing the whole gate.
- Slide gates binding where live oak roots buckle the concrete apron. The mature oaks along Broadway and the interior streets push surface roots into the travel path, lifting the track and jamming the rack and pinion. Clearing the root isn’t the fix; releveling the track and often re-pouring a section of apron is.
- Safety photocells failing inspection because the gate is no longer plumb. A post that settles two inches throws the swing arc out of alignment, and the photocell beam misses its reflector. Alamo Heights enforces its own inspection requirements, so this one catches a lot of people off guard.
- Wrought-iron bottom rails rusting through at the weld joints. Older Alamo Heights gates weren’t galvanized under the paint. Fifty or eighty years of humidity and irrigation overspray eats the rail from inside, and the first sign is usually a gate that flexes when a kid swings on it.
Pricing for Gate Parts & Welding in Alamo Heights, TX
Here’s what you can expect in the 78209 market. Hinge replacement: $220-$480 per hinge, including the weld and paint touch. Post replacement: $600-$1,400 depending on material and right-of-way permits. Rail repair: $300-$650. Custom welding for ornamental matching: $180 and up for smaller sections. Full gate releveling with hinge re-placement on a 1920s limestone pillar runs $450-$900. The price you’re quoted is the price you pay, and we agree on it in writing before the first weld. We never show up with a higher number. Stand with the estimator while he looks at the gate; you’ll hear the same number we write down. Alamo Heights homes with shared driveways and right-of-way pillars sometimes add a permit fee, and we’ll tell you about that during the estimate, not after.
We Also Serve Cities Near Alamo Heights
Most of our Alamo Heights work comes from referrals in Terrell Hills, and we regularly take calls from San Antonio, Windcrest, and Kirby. If you’re a few minutes outside the 78209 ZIP, you’re still in our normal service area. One call covers all of it.
Serving Alamo Heights, TX - Our Local Coverage Area
We’re based in the Alamo Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Alamo Heights
Yes, in most cases, if the pillar abuts a city right-of-way or sits on a shared driveway east of Broadway. Alamo Heights runs its own code enforcement separate from San Antonio, and they require a permit for structural gate repairs on right-of-way pillars. We handle that paperwork so you don’t have to guess at it. Call (877) 610-2993 and we’ll tell you during the estimate whether your specific pillar triggers the requirement.
Because the Beaumont clay under your post footing is shrinking as the mature live oaks pull moisture out of the soil in summer, and the post shifts with it. The hinges weren’t the problem; the footing moved. The fix is releveling the post and re-plumbing the hinges, not another hinge swap. In Alamo Heights this is one of the most common recurring repairs we see.
Yes, and we do it often on the narrower lots in Alamo Heights where a swing gate’s arc would block the sidewalk or the neighbor’s access. We’ll measure the run, set a track that clears any live oak root activity, and wire the Gate Access Control in Alamo Heights operator for safe reversing. A conversion like this starts around $1,800-$3,500 depending on gate size and operator brand. The estimate is free and written down.
We stage the repair so the gate comes off for the shortest window possible, usually an hour or two, and we’ll coordinate with your neighbor so nobody’s car is trapped. On shared driveways in Alamo Heights, we’ll often do the prep work in the morning and the weld in the afternoon so the gate is back swinging by evening. You’ll know the schedule before we start.
We match the section profile, the scroll pattern, and the way the original blacksmith’s welds showed through the paint. It won’t look brand new; it’ll look like the rest of the gate. That’s the whole point on an original Alamo Heights gate, and it’s why we weld on site rather than swapping in an off-the-shelf replacement panel. Call (877) 610-2993 for a free estimate.
If your gate has a broken hinge strap, a leaning post, or a rusted rail that’s about to let go, call us. Free estimate, no trip charge inside the county, and $40 off any repair over $200. Seniors and veterans always get 10% off. The phone rings to a live person.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alamo Heights since 2001.