Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Airway Heights
If you’re looking for Gate Installation in Airway Heights or your existing gate is sagging, dragging on its rollers, or the opener is grinding because a weld let go, here’s the straight answer: we fix it on site, most calls in the 99001 zip code get same-week scheduling, and the price is locked before any work starts. The wind out here on the Columbia Plateau is not kind to gates. Neither is the soil. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and he’s the person you’ll talk to when you call (877) 610-2993. Not a phone tree. Not a sales rep. The owner.
We’ve worked on gates throughout Airway Heights long enough to know what actually breaks here: wind-warped rollers, hinge posts that heave out of caliche every spring, and solar batteries that die during cloudy eastern Washington winters. This page is about the real problems and what a fix costs. No drama, no upsell, just what you need to know.
Why Gatewood Fence & Gate Is Airway Heights’s Preferred Gate Parts & Welding Company
We’re the local company that fixes gates other outfits want to replace. Swapping a perfectly good panel because a hinge post shifted is not how Hal works. Our Gate Parts & Welding crew welds on site, in your driveway, so the gate never leaves your property. If a post needs resetting, we reset it. If a rail weld cracked, we re-weld it. If a roller can be rebuilt, we rebuild it. Repair first, replacement only when it actually makes sense.
Every job carries the 90-Day Done Right Promise in writing. If the weld we did or the post we set fails within 90 days, one call brings us back. No finger-pointing, no fine print. Hal’s name is on the shop and on every invoice. That’s the accountability a lot of Airway Heights homeowners tell us they’ve been missing from the national chains.
We also answer the phone at 3 a.m. the same way we answer at 10 a.m. A live person, not a voicemail or a call center. When your gate is stuck open and the dog is out, you don’t have time to leave a message and wait. You can call (877) 610-2993 and get Hal or one of his crew. This page is for Airway Heights specifically because we know the wind, the dirt, and the kind of gates people actually have around here.
Our Gate Parts & Welding Services in Airway Heights
Hinge Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. In Airway Heights, the caliche and clay soil freezes and thaws every winter, and each cycle moves the post a little more. We cut out the old post, set a new one deeper with proper concrete embedment, and hang the gate so it actually swings level. The hinge hardware we use is rated for the wind load this plateau produces.
Post Replacement
Around the rural edges of Airway Heights, off roads like Craig and Flint, the older posts are often set shallow in ground that heaves hard. A post that moves even half an inch throws off the gate’s arc, which makes the opener’s limit switches fight the panel. We replace posts with heavier gauge steel or properly treated wood, set below frost depth. Then we check the entire gate’s geometry, not just the post. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Wide farm gates catch the wind like a sail. Over time, the rail-to-stile welds at the corners start to crack, especially on west-facing acreage entrances where there’s no windbreak at all. We grind out the old weld, re-weld the joint, and add gusset reinforcement where the wind keeps working on it. Rail repair in Airway Heights usually runs $150 to $400 depending on how much weld area is compromised.
Custom Welding
Not every gate fits a prefabricated part. When a hinge tab snaps, a latch bracket tears off, or the opener mount doesn’t line up with anything in a catalog, we fabricate it on site. Our welding truck carries stick and MIG setups, so we can build what your gate needs while it’s still hanging in the opening. Custom welding in Airway Heights typically runs $95 to $250 for most bracket and plate work, more for structural reinforcement across a full panel.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Airway Heights
We’re certified to work on nine major gate brands, and for Airway Heights customers we stock the most common parts locally: LiftMaster control boards, FAAC limit switches, BFT capacitors, Viking receivers, Ghost Controls remotes, DoorKing circuit boards, Elite photocells, and Mighty Mule hardware. We see a lot of Linear and DoorKing openers on Airway Heights driveways, plus Viking on the rural parcels where the gates are heavier, and we service Airway Heights Gate Motor & Opener systems from all nine brands we carry. If you’ve got a keypad entry system the previous owner left behind with no manual, we can usually reconfigure it while we’re there for the gate repair.
Common Gate Parts & Welding Problems We See in Airway Heights Homes
- Spring-thaw hinge post heave: The clay and caliche under Airway Heights freezes deep, then thaws unevenly. Hinge posts drift, welded plates snap, and the gate starts dragging on the latch side. This is the single most common gate failure in the 99001 zip code from March through May.
- Wind-cracked rail welds on wide gates: Open-plateau southwest winds push constantly on wide farm gates west of Hayford Road. Corner welds fatigue and crack, and the gate starts racking, which is when the opener’s rack and pinion skips. We see this most after winter storms.
- Solar opener batteries dying in winter: Cloudy January and February can leave solar-charged batteries too weak to move a 16-foot steel gate. The gate sits dead or, worse, jammed halfway on a slide track that’s frozen in place. We test the panel output, the battery condition, and the opener’s current draw before recommending a fix.
- Slide gate track drift from wind: Rack-and-pinion drives on slide gates accumulate drift faster here than anywhere else in Spokane County because there’s no windbreak. Rollers wear on one edge, the rack skips, and the gate jams. We realign the track, replace worn rollers, and set the drive gear’s engagement properly.
Pricing for Gate Parts & Welding in Airway Heights, WA
Here’s the honest range for Airway Heights. Hinge replacement on a standard residential gate runs $180 to $380 including parts and on-site welding. Post replacement is $250 to $600 depending on post size, soil condition, and whether we’re cutting out concrete from an old footing. Rail repair with re-welding typically runs $150 to $400. Gate roller replacement on a slide gate runs $75 to $200 per roller assembly, and a full slide gate service with track realignment is $325 to $600. Custom welding is quoted by the actual work, usually $95 an hour plus materials, and we tell you the number before the torch comes on.
Every price is quoted and agreed before we start. You won’t get a call that says “it’s worse than we thought, here’s the new number.” If we find additional problems during the repair, we stop, show you, and quote the added work separately. That’s how Hal’s run this company since 2001.
We offer $40 off any repair over $200, no trip charge inside Spokane County, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. That’s it. No haggling, no pressure.
We Also Serve Cities Near Airway Heights
Gatewood Fence & Gate handles gate parts and welding for the whole Spokane west plain. If you’re in Gate Parts & Welding in Airway Heights or just across the line in Spokane, Cheney, Country Homes, or Dishman, we’ll come to you. The same crew, the same on-site welding, the same 90-Day Done Right Promise. If you’re near Fairchild, you’re in our regular service loop.
Serving Airway Heights, WA - Our Local Coverage Area
We’re based in the Airway Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Airway Heights
The operator almost certainly tests fine because the problem is in the ground, not the motor. Airway Heights sits on caliche and clay that freezes deep each winter and heaves as it thaws. That movement tilts the hinge post, which shifts the gate’s entire swing arc. The operator’s limit switches are set for the old arc, so now they’re fighting the panel every time it runs. The fix is resetting the hinge post below frost depth and then reprogramming the limits to match the corrected geometry. The operator was never broken. Call (877) 610-2993 and we’ll check the post before we touch the motor.
Yes. Many Airway Heights properties on the city’s edge have driveways 300 to 900 feet long, and trenching power out that far often costs more than the gate itself. We install solar panels sized for the opener’s load, plus a battery bank that can run the gate through several days of cloud cover. For wide farm gates, we may recommend a heavier panel and a larger battery because the opener draws more current. The entire conversion usually runs $1,200 to $2,800 depending on panel count and gate size. We quote it before we order anything. Call us and we’ll measure the actual site.
We can, in most cases. Keypads from Linear, DoorKing, Viking, and Ghost Controls are all serviceable, and we usually don’t need the manual. We can reset the master code, add new user codes for your family, and reprogram the system to match the opener’s current limits. On base housing surrounding Fairchild, we also get called to remove old codes when a new family moves in, which is exactly the kind of Gate Access Control - Airway Heights task this zip code generates more than any other in the county. If the keypad itself is dead, replacing it is usually under $300 installed.
More often than a Spokane valley homeowner would expect. The open Columbia Plateau wind pushes slide gates sideways continuously, loading one edge of every roller. Even quality steel rollers wear unevenly out here. We generally recommend inspecting slide gate rollers every 12 to 18 months in Airway Heights, and replacing them when you see flat spots or resistance. A full roller set for a typical 14 to 16 foot slide gate runs $300 to $650 installed. Ignoring worn rollers is what causes the rack and pinion to skip and the track to bend. Call us if you’re hearing grinding or the gate shudders at the end of its travel.
It often is, especially on west-facing entrances with no windbreak. A wide swing gate acts like a huge sail in plateau winds, loading the hinge post and the rail welds on every gust. A slide gate runs parallel to the fence line, so the wind hits its narrow face instead of the full panel surface. That doesn’t eliminate wind problems, but it moves the stress from the hinge post to the track and rollers, which are easier and cheaper to service. Converting a farm gate from swing to slide in Airway Heights typically runs $3,000 to $6,000 depending on post condition, track fabrication, and operator capacity. We can weld the new track supports on site without hauling the gate anywhere. Call for a free measure and a written price.
Contact Gatewood Fence & Gate for Gate Parts & Welding in Airway Heights
Your gate is the first thing between your family and the road. When it’s dragging, binding, or dead, you want someone who treats it like it matters. Gatewood Fence & Gate is owner-operated, answers the phone with a live person 24/7, and stands behind every Airway Heights job with the 90-Day Done Right Promise. The name’s on the shop and the shop’s down the road. That’s the oldest accountability there is.
Call (877) 610-2993 for a free estimate. Hal will talk you through what’s wrong, what it costs, and when we can be there. If you’ve got a written quote from another company, bring it. A second opinion is free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Fixing gates on the Columbia Plateau and across Airway Heights since 2001.