Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tempe, AZ
Gate repair in Tempe usually means one of two things: a sagging gate in the older rental blocks near ASU, or a dead operator in a south Tempe HOA community where the builder-grade hardware finally gave up. Both are fixable, often the same day we hear from you. We know the difference between a caliche-heaved post in 85282 and an end-of-life control board in 85284 because we’ve been swinging wrenches in driveways from Warner Ranch to Kiwanis Park since 2001. Call (877) 610-2993 and you’ll reach a live person who can talk through what’s actually wrong.
Why Tempe Homes Are Different
Tempe has a split-market dynamic unlike any neighboring city. The dense ASU rental corridor in 85281-85282 generates constant gate repair demand driven by high-turnover student tenancy, deferred maintenance, and vandalism on aging ornamental iron and chain-link gates. Landlords often defer maintenance until a gate that should have been trued up five years ago is now binding against its latch and dragging on its hinges.
South Tempe’s 85284 ZIP tells a different story. These are 1990s-2000s master-planned HOA communities with automated vehicular gate operators installed during the building boom, and those operators are now hitting end-of-life simultaneously. A concentrated replacement wave unique to Tempe’s development timeline means we’re replacing control boards and motors in clusters.
The climate makes both problems worse. Tempe’s extreme summer heat pushes metal gate surface temperatures well above 150°F, causing steel frames to expand and bind against latches and hinges daily. Seasonal haboob dust storms funnel fine caliche particles directly into gate operator motors, photo-eye sensors, and limit switches, accelerating wear far beyond standard maintenance intervals.
Gate Repair in Tempe
Gate repair in Tempe comes down to two questions: how fast can someone show up, and will the fix actually hold through a desert summer. We answer both the same way every time. A live person picks up the phone, you get an honest price before any work starts, and the job carries our 90-Day Done Right Promise in writing. Hal still welds on site in your driveway rather than hauling your gate to some shop across the valley.
Electric Gate Repair
Electric gate repair in Tempe tends to come down to three culprits: dead control boards, fried motors, or sensors choking on haboob dust. When a 20-year-old builder-grade operator in 85284 quits, it’s rarely worth resurrecting. We’ll tell you straight, give you a written quote for the replacement, and do the work the same visit if the part’s on the truck. Electric gate and operator repairs land between $220 and $550 when we’re replacing limit switches, loop detectors, or photo-eyes. No trip charge inside the county, and $40 off any repair over $200.
Hinge and Post Repair
Hinge and post repair is where most Tempe gate failures actually start. In 85282 especially, we see gate posts set shallow in caliche-heavy soil. When monsoon rain saturates the ground, the caliche shifts, the post heaves, and the gate binds against the latch. You’ll think the latch is broken. It isn’t. We dig the post, pour a proper footing, weld the hinge back square, and the gate swings like it’s new. A hinge and post repair in Tempe typically runs $180 to $340 depending on the footing work and whether the post needs to be re-poured. On-site welding means your gate stays in your driveway, not hauled across town.
Gate Realignment
A gate sags in the hinge post, not in the middle. That’s where we start every realignment in Tempe. Extreme summer heat pushes steel gate frames well above 150°F, expanding the metal daily until it binds against latches and hinges. We correct the post, reset the hinges, and often add a diagonal brace or a wheel where the grade calls for it. The gate closes on its own after that, and it keeps closing through the next haboob season. If you’re dealing with a gate that won’t stay true, our Gate Repair covers everything from simple adjustments to full rebuilds.
Why do so many gate operators in Tempe’s 85284 communities fail around the same time?
Those HOA-governed communities were built in a single window between 1995 and 2008, and most builders installed gate operators from the same handful of brands with similar lifespans. Those operators are now reaching end-of-life in the same 3 to 5 year stretch, so what looks like a wave of failures is really a development-timeline problem unique to Tempe’s south side. If your operator is 18 to 25 years old, call (877) 610-2993 for an honest assessment.
Why does my gate in Tempe bind every afternoon during summer?
The heat is doing the pushing. Tempe’s summer sun pushes steel gate surface temperatures above 150°F, and the metal expands enough to close the clearance between the gate and the latch or hinge. The gate binds in the afternoon, then frees up after sunset when the frame cools. The fix is usually a hinge adjustment, a latch reposition, or a realignment that compensates for the expansion range. Call (877) 610-2993 for a free estimate.
Gate Installation in Tempe
A new driveway gate in Tempe typically runs $2,800 to $7,500 installed, depending on whether you’re putting an automated slide gate on a south Tempe HOA lot or a simple swing gate on a 1960s rancher near ASU. Most installs take two to three days once we’ve measured and ordered the steel. If you’re in 85283, 85284, 85285, or 85287, Hal will come out, take measurements himself, and hand you a written price before any work begins.
Driveway Gate Installation
A driveway gate in Tempe usually means either a sliding gate on a track or a swing gate on hinges, sometimes automated, sometimes not. South Tempe’s HOA communities from the 1995-2008 building wave are where we see the most automated driveway gates, and a lot of those original operators are failing at the same time. We install the gate and the operator together, set the safety edges and photo eyes properly, and test the full cycle a dozen times before we leave. An automated slide gate in the 85284 area with a new operator, safety edges, and photo eyes typically runs $4,500 to $7,500.
Pedestrian Gate Installation
Up near ASU in 85281 and 85282, pedestrian gates take a beating. Decades of student foot traffic, shoulders, bikes, and neglect have left original ornamental iron gates sagging on worn hinges. We build and install new pedestrian gates with heavier hinges and a closer that can survive daily use. If the post itself is tilted from caliche heave, we fix that first. Hanging a new gate on a bad post is throwing money away. Pedestrian gates run $900 to $2,400 installed, with decorative ornamental styles on the higher end.
Swing Gate Installation
Single and double swing gates are the most common style in Tempe’s older neighborhoods. A double gate means two leafs meeting in the middle, and they only work right if both posts are perfectly plumb and the hinges are rated for the full weight. We weld on site, so if a custom width or odd setback comes up, Hal can modify the steel right in your driveway instead of ordering a new panel and making you wait another three weeks. A basic single swing driveway gate with no automation starts around $2,800. Double swing gates add $800 to $2,000 depending on width and steel gauge. Every quote we give is written, itemized, and agreed before we start. No surprises on the invoice. If you want to see what full projects look like, our Gate Installation page has more detail.
How fast can you come out to Tempe for a gate install?
We can usually get someone out to measure within one business day if you call before noon. The install itself gets scheduled once the steel is cut and welded. For a standard swing or pedestrian gate, that’s typically within a week. For custom automated gates, allow two to three weeks from measure to completion. Call (877) 610-2993 and we’ll give you a straight answer on timing.
What does a full driveway gate installation include?
A full install includes site measurement, removal of the old gate if there is one, new posts set in concrete below the caliche line, the gate frame and panels, hinges or track hardware, the operator if you’re automating it, safety edges and photo eyes, and a final test. The written estimate itemizes every one of those pieces, and the price is locked before work starts. Call (877) 610-2993 for your free measure and quote.
Gate Motor & Opener in Tempe
A gate motor that strains, stalls, or simply stops responding isn’t something to put off, especially in Tempe where a gate left half-open is an invitation to every coyote, solicitor, and curious stranger in the neighborhood. Gate motor repair in Tempe typically runs $180 to $450, while a full operator replacement usually lands between $650 and $1,400, and most jobs are completed the same visit once parts are confirmed. Hal has been fixing gate operators since 2001, and when he says a motor is worth repairing, it means he’s seen it run another five years.
Motor Installation
A new gate motor in Tempe usually replaces an operator that’s 15 to 20 years old, and in south Tempe, we’re now seeing entire neighborhoods where the original 1998 to 2005-era openers are failing within a few years of each other. Installation starts with measuring the gate’s weight, travel, and hinge condition, because bolting a new operator onto a gate that sags ruins the motor within a year. A full operator replacement for a typical residential swing or slide gate lands between $650 and $1,400, depending on the brand and the gate’s size. We quote the full price before any work starts.
Motor Repair
Most motor repair in Tempe means replacing a capacitor, a limit switch, or a burnt control board, or rewiring a photo eye that’s been pitted and scoured by haboob dust. We don’t swap healthy parts to make a ticket bigger. If the operator can be repaired, we repair it. If it’s truly end of life, we’ll tell you in plain language what the difference is and let you decide. A standard motor repair runs $180 to $450, parts included. Tempe’s heat pushes metal gates past 150°F in July, so we also check what heat expansion has done to the rack before we close up.
Slide Motor Service
Slide motors in Tempe get the worst of the monsoon season, because fine caliche dust works its way into the gear housing and turns the grease into grinding paste. We see slide operators off Rural Road, along the 101 corridor, and through 85284 that fail not because the motor died, but because the drive train was never cleaned. A good slide motor service includes pulling the cover, cleaning the rail, adjusting the chain tension, and testing the obstruction reverse under load. That’s what “done right” means. A heavy commercial slide operator, common at Tempe apartment complexes and HOA entries, runs $1,500 to $2,800 installed. For more on what we cover, our Gate Motor & Opener page breaks it down further.
What does a gate motor replacement cost in Tempe compared to Mesa or Chandler?
A residential gate operator replacement in Tempe runs $650 to $1,400, which is in line with Mesa and Chandler, but the failure profile is different here. Tempe’s mix of older student-rental gates and end-of-life HOA operators from the 1990s and 2000s means we replace more full units than in cities with newer stock. We quote the number before any work starts, so the estimate is the price. Call (877) 610-2993 for an exact quote.
Do you install battery backup and intercom systems on gate motors in Tempe?
Yes, we install battery backup systems and integrate intercoms and phone-based entry on gate operators throughout Tempe. Battery backup is especially useful in Tempe where monsoon storms knock out power and leave an automated gate dead, often the exact moment you need it to work. If you want the gate tied to your phone or an intercom, we handle that on the same visit as the motor work. Call (877) 610-2993 to discuss options.
Gate Access Control in Tempe
A basic keypad or card reader for a Tempe gate runs $350-$900 installed, while a full phone-entry or video intercom system typically lands between $1,200 and $2,800. Most access control jobs in Tempe wrap up same-day, especially keypads and remotes, because we keep the common Viking, Ghost Controls, and DoorKing parts on the truck. If you’re reading this because a tenant just moved out, a delivery driver can’t get in, or the HOA sent a letter about your gate, call and we’ll sort it.
Keypad Entry
Keypad entry is the workhorse for Tempe’s rental-heavy 85281 and 85282 ZIP codes. A new tenant moves in, the landlord wants a fresh code, and the old keypad from 2012 is sun-cracked and unreadable. We install and program keypads for pedestrian and vehicular gates, and we always set a master code the owner keeps. Typical keypad install in Tempe runs $350-$650, including the unit, wiring, and programming. Tempe summer surface temperatures above 150°F crack keypad membranes and make button contacts flaky, so we reseal the housing so it survives the next August.
Remote Control
Remote controls fail quietly. One day the gate opens from 30 feet, the next day only from 10, and then not at all. In Tempe’s summer heat, the lithium batteries inside remotes degrade faster than manufacturers expect, and the plastic shells warp on dashboards. We program new remotes, troubleshoot receiver issues, and can often revive an existing remote that another company said was dead. Remote replacement and programming runs $95-$250 in Tempe, depending on the brand and how many remotes you need.
Phone Entry
Phone entry systems are how a gate gets smarter without getting complicated. A visitor pulls up, dials the number on the panel, and your phone rings so you can buzz them in. For Tempe landlords with tenants across town or homeowners south of Baseline who get frequent deliveries, phone entry eliminates the “here’s a code, don’t share it” conversation entirely. Phone entry systems in Tempe run $1,200-$2,200 installed, and we set them up so calls route to whichever number you choose: your cell, a landline, or both in sequence. If you’re looking at access control options, our Gate Access Control page covers the full range.
Can you come out for an emergency gate access problem in Tempe at night?
Yes. A live person answers the phone 24 hours a day, not a voicemail or a chatbot. If your gate fails at 11 p.m. and a tenant or family member can’t get in, call (877) 610-2993 and we’ll figure out if it’s something we can walk you through immediately or whether a crew needs to roll out.
Why are your Tempe prices different from what I see in Phoenix or Mesa?
Our pricing is flat across Maricopa County, so Tempe customers pay the same as anyone else we serve. What changes is the job: Tempe’s caliche-heavy soil, haboob dust, and the age of gates in the 85284 HOA stock mean some jobs need structural correction or more thorough cleaning before the access control work starts. You’ll see that written clearly on your estimate, and the price you’re quoted is the price. Call (877) 610-2993 for a free second opinion.
Gate Parts & Welding in Tempe
When a gate hinge snaps or a post leans out of plumb in Tempe, you don’t have time for a company that wants to sell you a whole new gate. Most Tempe gate failures are parts-and-welding problems with another decade of life left in the frame, if someone fixes them right the first time. We repair the gate where it stands, usually without hauling anything off the property. Hal has been doing this since 2001, and you can drive to the shop and look him in the eye if you want.
Hinge Replacement
Hinges are the most common gate parts failure in Tempe, and they fail in a very Tempe-specific way. The summer heat cycle, when steel frames bake well past 150°F and then cool overnight, works hinge barrels loose and shears off fasteners. We remove the old hinge, check the post for integrity, and weld or bolt a new one in true alignment. A Tempe gate hinge replacement typically runs $120 to $280 per hinge, including the hardware and the realignment.
Post Replacement
In the neighborhoods south of Arizona State University, we regularly find gate posts sitting in shallow caliche-heavy footings. The caliche shifts during monsoon saturation, the post heaves, and the gate starts dragging. A post replacement in Tempe runs $380 to $800 for a standard 16-gauge steel post with a proper concrete footing, set straight, and tied back to the gate. We won’t patch a post that will fail again in a season. We replace it right.
Custom Welding
Sometimes the gate that fits the opening doesn’t exist in a catalog. Maybe it’s a pedestrian gate in a 1970s Tempe apartment complex courtyard, or a driveway gate with a custom ornamental pattern somebody fabricated when the house was built. Hal welds new steel to old, in place, matching the existing design. Custom welding in Tempe starts around $150 for a simple crack repair and climbs from there with materials and hours, always quoted and agreed before the torch lights. If you need parts or fabrication work, our Gate Parts & Welding page has more detail.
Do you handle emergency gate welding on nights or weekends?
Yes. A live person answers our phone 24/7, and we run emergency service for gates that are stuck open, won’t secure, or have become a safety hazard. The 90-Day Done Right Promise applies to emergency repairs the same as scheduled work. Call (877) 610-2993 and we’ll get someone moving.
Is gate repair more expensive in Tempe because of the heat?
No. Our Tempe pricing tracks the same ranges as the rest of the valley. What changes is the failure pattern, not the price. Heat and haboob dust mean Tempe gates fail in more predictable ways, which often makes the repair faster, not more expensive. You get the written quote before work starts, every time. Call (877) 610-2993 for a free estimate.
Brands We Service in Tempe
We stock parts and carry diagnostic tools for nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means most Tempe repairs don’t wait on a parts order from out of state. If your operator is a Linear, Viking, or Ghost Controls unit, there’s a good chance we have the board, sensor, or arm on the truck today.
Pricing for Gate Repair in Tempe, AZ
| Service | Typical Range in Tempe |
|---|---|
| Hinge & post repair | $180 - $340 |
| Electric gate / operator repair | $220 - $550 |
| Full operator replacement | $850 - $1,400 |
| Basic single swing gate (no automation) | $2,800 |
| Automated slide gate with operator | $4,500 - $7,500 |
| Double swing gate (add-on) | $800 - $2,000 |
| Pedestrian gate installed | $900 - $2,400 |
| Gate motor repair | $180 - $450 |
| Residential operator replacement | $650 - $1,400 |
| Commercial slide operator | $1,500 - $2,800 |
| Keypad entry install | $350 - $650 |
| Remote replacement & programming | $95 - $250 |
What pushes price up in Tempe: caliche depth requiring deeper post footings, haboob dust damage inside operator housings, and HOA-mandated safety upgrades on older automated systems. The price we quote is the price on the invoice, agreed in writing before any work starts.
Neighborhoods We Serve in Tempe
We cover all of Tempe from 85281 through 85287. That includes the dense student rental corridor along Apache Boulevard, the mature subdivisions around Kiwanis Park, the gated HOA communities stretching south through 85284, and everything in between. Response time for repair calls is typically same-day when you call before noon.
- ASU / Broadway Corridor (85281-85282)
- Kiwanis Park / Rural Road area (85283)
- South Tempe HOA districts (85284)
- The Lakes / McClintock area (85283)
Service Area - Cities Near Tempe
We dispatch and schedule from our Phoenix office, and crews serve Tempe locally every day. We also work in Guadalupe, Tempe Junction, Ahwatukee Foothills, Central City, and Chandler. If you’re on the border and not sure who covers your address, call and ask. If it’s close to Tempe, we’re there.
Serving Tempe, AZ - Our Local Coverage Area
Gatewood Fence & Gate crews serve Tempe and the communities around it; dispatch is coordinated from our Phoenix office. The map shows the Tempe coverage area; if your address is on it, we can help.
Also serving nearby: Tempe, AZ, Guadalupe, AZ, Tempe Junction, AZ, Ahwatukee Foothills, AZ, Central City, AZ, Chandler, AZ.
FAQs About Gate Repair in Tempe
Most gate repairs in Tempe are completed within one business day of your call, and emergency calls are answered by a live person 24/7 who can get someone moving. If you’re in 85283, 85284, or near ASU, you’re within our normal local service day. Call (877) 610-2993 and describe what the gate is doing.
Most residential gate replacements in Tempe don’t require a permit if you’re keeping the same footprint and height. New automated gates or changes to the opening width may need a quick review through the city. We know the Tempe permit process and will tell you upfront if your job needs paperwork, then handle it if it does.
Yes. We repair and replace gates in 85284 HOA communities regularly, and we know most of the architectural guidelines and safety requirements these associations enforce. We provide written estimates that satisfy HOA board review, and we coordinate access with property managers when needed. Call (877) 610-2993 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tempe Customers Say
"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo