Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Silverdale, WA
Gate repair in Silverdale usually runs $180 to $650, with most residential jobs completed same day or next morning. The salt-laden marine air off Dyes Inlet, combined with clay-heavy soils that swell through our wet seasons, creates failure patterns you won’t see even a few miles inland. When you call (877) 610-2993, a live person answers, and Hal Gatewood will be the one who shows up.
Why Silverdale Homes Are Different
Silverdale sits directly on Dyes Inlet, a saltwater arm of Puget Sound. That means metal gate hardware faces accelerated corrosion from salt-laden marine air on top of the region’s 55-plus inches of annual rain. This double assault is distinctly more corrosive than conditions even a few miles inland toward Bremerton or Poulsbo. Standard zinc-plated hinges and latches degrade within a few years here. Stainless or hot-dip galvanized components are effectively a requirement, not an upgrade.
The housing stock tells the same story from a different angle. Most Silverdale neighborhoods were built between the 1980s and early 2000s to house Naval Base Kitsap’s workforce. That means a large inventory of wood privacy fences with gate posts now 20 to 40 years old, many rotted at the base from ground contact in the wet clay soils of the Kitsap Peninsula. Chain-link and ornamental iron gates from the same era are widespread along the commercial corridors on Silverdale Way and Myhre Road.
The combination of salt air, heavy rainfall, and clay-heavy soils causes gate posts to heave and lean seasonally as the ground saturates and swells, throwing hinges out of alignment every wet season. Properties closest to the Dyes Inlet shoreline routinely show complete hinge failure and latch seizure within three to five years on gates installed with standard hardware, a failure cycle that technicians serving only inland Kitsap communities rarely encounter.
Gate Repair in Silverdale
Gate repair in Silverdale typically means one of three things: a hinge post rotted out in wet clay, a control board fried from fighting a binding gate, or salt-air corrosion on hardware near Dyes Inlet. We fix all three, and we fix them in your driveway. Hal Gatewood has been owner-operating this shop since 2001, and when you call (877) 610-2993, a live person picks up. Not a voicemail. Not a call center. Someone who knows what a Silverdale gate goes through.
We work throughout Silverdale, from the waterfront retail area near Dyes Inlet to the residential streets above Silverdale Way. Typical response for a non-emergency repair is same day or next morning, depending on when you call. Our Gate Repair service covers every type of gate failure we see in the 98315 and 98383 zip codes.
Electric Gate Repair
Most electric gates in Silverdale fail because the operator is fighting something mechanically wrong downstream. A hinge post shifts in wet clay, the gate binds, the motor works harder, and the control board burns out. We trace the actual cause instead of swapping boards until the next one fries. Electric gate repair, including diagnosis and a typical control board replacement, runs $300 to $700. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
Hinge and Post Repair
This is the most common gate repair in Silverdale, period. Hinge posts set in saturated clay rot at the base, and the whole gate leaf drops, binds at the latch, and tears out hinge screws. We dig the post, replace or reset it in a deeper concrete footing, and re-hang the gate with hardware that holds up here. A typical hinge and post repair in Silverdale runs $250 to $600, depending on whether the post needs resetting in fresh concrete or can be reinforced in place. Standard zinc-plated hinges degrade fast in this marine air. We use hot-dip galvanized or stainless components where the gate calls for them.
Gate Realignment
A gate sags in the hinge post, not in the middle. Realigning a Silverdale gate often means correcting the post lean caused by seasonal ground movement, not just cranking the hinge screws. We get the leaf swinging square again, weld cracks when needed, and tune the operator so it isn’t fighting the gate. Gate realignment with operator tuning runs $175 to $350. The goal is a gate that opens smoothly in February, not just in July.
Why do my gate hinges seize up so fast in Silverdale compared to my brother’s place in Poulsbo?
Salt air. Silverdale sits directly on Dyes Inlet, and the marine air carries salt particles that accelerate corrosion far beyond what inland rainfall alone causes. Poulsbo sits back from the water, so the same hinge lasts twice as long there. We switch to stainless or hot-dip galvanized hinges, which hold up to Silverdale’s salt air for years instead of seasons. Call (877) 610-2993 for an exact quote.
My gate post leans every winter - do I need a whole new fence section?
Usually not. A leaning gate post in Silverdale typically means the post footing is too shallow for the clay soil, and the wet season’s ground saturation is heaving it out of plumb. We reset the post in a deeper concrete footing, and the surrounding fence section stays in place. A typical post reset runs $250 to $600, far less than replacing an entire section. You’ll get the price before we start.
Gate Installation in Silverdale
A new driveway gate in Silverdale typically runs $2,800 to $7,500 installed, with swing gates on the lower end and sliding or double gates higher. Most installations take one full day once the gate and hardware arrive, and we quote the price in writing before any work starts. The salt air off Dyes Inlet and the clay-heavy soils here change what materials we spec and how deep we set posts, so a Silverdale install is not the same job as one in Bremerton or Poulsbo.
Our Gate Installation service covers every property type in the 98315 and 98383 zip codes, from waterfront homes to hillside driveways to commercial gates along Silverdale Way.
Swing Gate Installation
The classic single or double swing gate works well on most Silverdale driveways, especially the flatter lots common to the 1980s and 1990s subdivisions. One thing we insist on for swing gates here: posts set deep. The wet clay soil on the Kitsap Peninsula heaves every winter, and a post set in 24 inches of concrete will lean within a couple of seasons. We set posts at least 30 inches down, using pressure-treated 6x6s or steel posts for heavier gates. A single swing driveway gate, wood or chain-link, typically runs $1,800 to $3,500 installed.
Sliding Gate Installation
Sliding gates work particularly well on Silverdale driveways that slope down toward the street, where a swing gate would scrape or need to work against gravity. These are standard along the commercial stretches of Myhre Road and Silverdale Way, but plenty of residential driveways in the hills above Kitsap Mall use them too. A residential sliding gate with an operator usually runs $4,500 to $8,000. The track and roller hardware needs to be stainless or you’ll be replacing it inside five years, especially if you’re within a half-mile of Dyes Inlet.
Security Gate Installation
For Silverdale homeowners who head south for the winter or who want tighter control over who gets onto the property, we install security gates with keypad entry, intercoms, and battery backup systems. These usually start around $3,800 for a single swing gate with a keypad and run up from there depending on automation and access control needs. Many of our Silverdale customers are snowbirds, and we build these systems so they keep working while the house is empty.
Do I need special hardware for a gate near Dyes Inlet in Silverdale?
Yes. Within half a mile or so of the water, standard zinc-plated hinges, latches, and springs routinely seize with rust within two to three years, sometimes faster. The salt aerosol off Dyes Inlet, combined with over 55 inches of rain a year, makes this stretch of Silverdale measurably harder on metal than inland toward Bremerton or Poulsbo. For any install near the shoreline we spec 316 stainless or hot-dip galvanized hardware as standard, not as an upgrade. Call (877) 610-2993 and we’ll walk your property.
My Silverdale gate post leans every winter. Will a new gate fix that?
No, and anyone who tells you otherwise is selling you an annual ritual. The post itself is moving, not the gate panel. Silverdale sits on clay-heavy Kitsap soil that swells with every wet season and shrinks in summer, and a post set in shallow concrete will heave side to side like a loose tooth. We pull the old post, set a new pressure-treated 6×6 or steel post at least 30 inches deep in proper concrete, and then hang your gate on something that stays plumb. The price is quoted before we dig.
Gate Motor & Opener in Silverdale
A gate motor and opener repair in Silverdale typically runs $240 to $620 depending on the operator type, and most jobs are completed in one visit. We know Silverdale’s salt air off Dyes Inlet shortens the life of standard hardware, so we stock the stainless and galvanized parts this area actually needs. Our Gate Motor & Opener service covers every major brand, with on-site diagnosis and repair so your gate isn’t sitting open for days.
Motor Installation
A new gate motor installation in Silverdale runs $1,450 to $3,900 for a complete swing or slide package, including the operator, safety photocells, and remote programming. On properties along Dyes Inlet, we recommend stainless mounting hardware and a sealed control box from the start. Standard zinc hardware will be rusting within three years. We install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators.
Motor Repair
Motor repair in Silverdale typically costs $180 to $480 for common failures like limit switch replacement, capacitor swaps, or control board diagnosis. The most frequent issue we fix is salt-laden air getting inside the control box and corroding the limit switch terminals. That failure shows up three to five years after install on inlet-facing properties, far sooner than inland. We clean, seal, and replace the failed component, then test the full open-close cycle with the force settings recalibrated for the current season.
Battery Backup
Battery backup for a gate opener in Silverdale runs $380 to $750 installed, and for many of our 55-plus community customers, it’s the single most important upgrade we recommend. Power outages along the inlet are common enough in winter storms, and no one wants a gate stuck closed when a medical appointment or a grandkid visit is waiting. We install sealed battery units, run the wiring in corrosion-resistant conduit, and test the system by killing power and cycling the gate. If it doesn’t open on backup, we fix it before we leave.
Do I need a special gate opener if I live near Dyes Inlet in Silverdale?
Yes. If your property is close to Dyes Inlet, you need an opener with a sealed control box, stainless mounting hardware, and corrosion-resistant wiring. Standard zinc-plated brackets and unsealed boards fail within three to five years in Silverdale’s salt-laden marine air, far faster than inland Kitsap. We stock stainless and hot-dip galvanized parts specifically for inlet-facing properties. Call (877) 610-2993 and we’ll spec the right setup for your exact location.
How often should I have my Silverdale gate operator serviced to avoid salt damage?
Every 12 months is the right interval for gate operator service in Silverdale, and it runs $120 to $240. Your tech should open the control box, clean and test the limit switch terminals, inspect the battery backup, and check for hinge post movement. Near Dyes Inlet, that annual service catches corrosion before it takes out the board. We also reseal the control box and pedestal base during the service. Call (877) 610-2993 to schedule.
Gate Access Control in Silverdale
Gate access control in Silverdale means keypads, remotes, phone entry, card readers, and video intercoms that hold up to salt air off Dyes Inlet and rain that doesn’t quit from October through May. We install, repair, and upgrade these systems on gates throughout the 98315 and 98383 zip codes, from the neighborhoods tucked behind Silverdale Way to the newer developments up near the Bangor corridor. Our Gate Access Control service is built around the reality that a keypad that won’t respond or a card reader that quits after a hard rain is worse than no system at all.
Keypad Entry
Keypad entry is the most common access system we install in Silverdale, and for good reason. It works without a phone, without an app, without a fob. You set a code, the gate opens. The catch here is moisture. A cheap zinc-plated keypad mounted on a gate post near Dyes Inlet will corrode at the wire terminals within a couple of wet seasons. We stock stainless and weather-sealed keypads rated for exactly this environment. A keypad replacement or new install on an existing opener typically runs $380 to $650.
Remote Control
Remotes are the workhorse of gated driveways in Silverdale’s suburban tracts, where every car in the family needs its own transmitter. If your system is a Viking or DoorKing, we can match new remotes to your existing receiver without replacing the whole opener. If the receiver itself has failed, we can often replace just that component. Remote control programming or replacement runs $45 to $120 per transmitter. A drifting remote signal on a Silverdale morning is often the result of a receiver antenna corroded at the base where it connects to the control board. We check that first, because replacing remotes won’t fix a bad receiver.
Phone Entry
Phone entry systems are more common in Silverdale’s gated communities and the commercial properties along Silverdale Way and Myhre Road. These systems let visitors buzz a homeowner’s cell phone, and the homeowner can open the gate from anywhere. The install is more involved because the unit needs a solid data connection, either cellular or through the property’s internet. In Silverdale, we also have to account for the gate’s distance from the house and the wet-weather reliability of that connection. A phone entry system on an existing gate in Silverdale typically runs $1,200 to $2,800 depending on entries and wiring.
How much does phone entry for a Silverdale gate cost compared to Bremerton or Poulsbo?
The base pricing is similar across Kitsap County, but Silverdale’s waterfront zones sometimes add a small materials cost for heavier weather sealing and stainless hardware. A phone entry system in Silverdale runs $1,200 to $2,800 installed, and that range holds whether you’re in Silverdale or Poulsbo. What changes is how we seal it, not what we charge for the core install. Call (877) 610-2993 for a written quote.
Can you replace just the keypad on my existing Silverdale gate opener?
Usually, yes. Most Silverdale gates with Viking, Ghost Controls, or DoorKing openers can accept a new keypad without replacing the motor or the control board. We’ll check the existing wiring for corrosion first, because on Dyes Inlet properties the wiring often fails before the keypad does. Call (877) 610-2993 and we’ll tell you what’s actually wrong before we quote anything.
Gate Parts & Welding in Silverdale
If your gate is sagging, seized, or rusting through near the hinges, here’s the short version: Gatewood Fence & Gate handles gate parts and welding in Silverdale with on-site repairs, so the gate never leaves your driveway. We stock hot-dip galvanized and stainless hardware because we know what Dyes Inlet’s salt air does to standard zinc parts. Hal welds on site with a rig in the truck, so you don’t lose access to your property while the gate is being fixed. Our Gate Parts & Welding service covers everything from hinge swaps to full post replacement to custom fabrication.
Hinge Replacement
This is the most common job we do in Silverdale, and for good reason. Standard zinc-plated hinges installed along the Dyes Inlet shoreline corrode to failure in three to five years. The same hinge lasts a decade or more five miles inland near Bremerton. We replace those with hot-dip galvanized or stainless steel hinges and fasteners, spec’d for salt air, and we check the post while we’re there because a worn hinge usually means a post that’s moving too. Hinge replacement on a standard wooden swing gate runs $180 to $340 depending on how many hinges and whether the post needs reinforcement.
Post Replacement
Silverdale’s clay-heavy soils heave and swell every wet season, which is most of the year here. Gate posts set in that ground lean and shift, throwing hinges out of alignment. When we replace a post in Silverdale, we set it deeper than the original, use proper concrete and drainage stone, and choose materials that hold up to the moisture. Gate post replacement runs $350 to $700 per post, including setting the new post, concrete, and re-hanging the gate. A post we set off NW Mountain View Road will still be plumb next spring.
Custom Welding
We weld cracked ornamental iron gates, rebuild broken frames, add mounting plates, reinforce post caps, and fabricate brackets to match what’s already there. Hal welds on site with a rig in the truck, so you don’t lose access to your driveway while the gate is being fixed. If something can be welded instead of replaced, we’ll weld it. That’s the whole point of the company. Rail repair and custom welding work runs $150 to $450 for most residential jobs, depending on the extent of the rust damage and how much fabrication is needed.
Why do my gate hinges fail so fast near Dyes Inlet compared to my friend’s house off Clear Creek Road?
Salt-laden marine air from Dyes Inlet corrodes standard zinc-plated hinges to failure in three to five years, while the same hardware off Clear Creek Road in Bremerton lasts eight to ten years. The salt spray near the water accelerates oxidation at the weld points and fastener threads. That’s why shoreline gates need hot-dip galvanized or stainless steel hardware, not what the big-box store sells. Call (877) 610-2993 and we’ll spec the right hardware for your gate.
Can you weld a cracked ornamental iron gate near Silverdale Way, or does it need full replacement?
In almost every case, we can weld it. We’ve repaired cracked ornamental iron gates all along the Silverdale Way commercial corridor, and most cracks are weldable in place. We grind out the rust, weld the crack, and strengthen the surrounding area. We’ll tell you honestly if a gate is too far gone, but replacement is never our first suggestion. Call us and we’ll give you a free assessment.
Brands We Service in Silverdale
We stock parts and carry factory authorization for nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most common repairs in Silverdale don’t require ordering parts from out of state. We carry stainless and hot-dip galvanized hardware in the truck specifically for Dyes Inlet’s marine environment, which means most jobs finish in one visit. See our brands for full details on each line.
Pricing for Gate Repair in Silverdale, WA
| Service | Typical range in Silverdale |
|---|---|
| Hinge and post repair | $250 - $600 |
| Gate realignment with operator tuning | $175 - $350 |
| Electric gate repair (diagnosis + control board) | $300 - $700 |
| Weld and rust repair with repainting | $200 - $500 |
| Latch and lock replacement | $150 - $300 |
| Single swing driveway gate, wood or chain-link | $1,800 - $3,500 |
| Single swing driveway gate, ornamental steel | $3,500 - $6,000 |
| Double swing driveway gate | $4,000 - $8,000 |
| Sliding gate with operator | $4,500 - $8,000 |
| Security gate with keypad and intercom | $3,800 - $7,500 |
| Gate motor installation (complete package) | $1,450 - $3,900 |
| Motor repair (limit switch, capacitor, board) | $180 - $480 |
What pushes a Silverdale job toward the high end: deep post replacement in clay soil, stainless hardware upgrades for Dyes Inlet exposure, longer power runs to the gate, and battery backup or access control add-ons. Every price is quoted and agreed in writing before any work starts, and that number does not change at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
Neighborhoods We Serve in Silverdale
We work throughout Silverdale, from the waterfront retail area near Dyes Inlet to the residential streets above Silverdale Way. Typical response for a non-emergency repair is same day or next morning, depending on when you call. Emergency calls get priority dispatch from our Seattle office, with crews already working in Kitsap County.
- Old Town Silverdale
- Clear Creek
- Ridgetop
- Silverdale Waterfront area
- Myhre Road corridor
Service Area - Cities Near Silverdale
We serve the full Kitsap Peninsula area surrounding Silverdale. Our crews are regularly in Bangor Trident Base, WA for military housing gate work, Tracyton, WA for waterfront repairs, Poulsbo, WA for rural driveway gates, Bremerton, WA for commercial and residential jobs, and Manchester, WA for shoreline properties facing the same salt-air challenges as Silverdale. If you’re in Silverdale, WA or any of these nearby communities, you’re in our service area with no trip charge.
Serving Silverdale, WA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Silverdale and the communities around it; dispatch is coordinated from our Seattle office. The map shows the Silverdale coverage area; if your address is on it, we can help.
Also serving nearby: Silverdale, WA, Bangor Trident Base, WA, Tracyton, WA, Poulsbo, WA, Bremerton, WA, Manchester, WA.
FAQs About Gate Repair in Silverdale
A live person answers 24/7, and for a gate stuck open or completely dead, we aim for same-day service in Silverdale on emergency calls. If your gate won’t close and you’re in the 98315 or 98383 zip codes, call (877) 610-2993 and tell us what’s happening. We’ll give you a straight answer on when we can be there.
Most residential gate repairs and like-for-like replacements don’t require a permit in unincorporated Kitsap County, but if you’re changing the gate height, adding an operator where there wasn’t one, or working within a shoreline setback near Dyes Inlet, the rules change. We know the local requirements and will tell you upfront if your job needs a permit pull. We don’t start work that puts you out of compliance.
Yes. Every job we do in Silverdale, whether it’s a hinge swap, a full motor install, or an access control upgrade, carries the 90-Day Done Right Promise in writing on the invoice. If it’s not done right, Hal comes back and makes it right. No runaround, no dispatch queue, no “we’ll get back to you.” The name is on the shop, and the shop answers the phone.
Call (877) 610-2993 today for a free estimate on any gate repair, installation, or upgrade in Silverdale. A live person will answer, and we’ll schedule a time that actually works for you.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Silverdale Customers Say
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu