Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Pigeon Forge, TN
Gate repair in Pigeon Forge typically costs $180-$650 depending on what’s broken, and most calls from property managers get a live person on the phone day or night. We fix gates across the cabin ridges and resort corridors here, from sagging swing gates on gravel driveways off Wears Valley Road to slide gates at Parkway properties that won’t close before the next guest arrives. Call (877) 610-2993 and we’ll give you a price before any work starts.
Why Pigeon Forge Homes Are Different
Pigeon Forge sits at the heart of one of the densest short-term vacation cabin rental markets in the United States. Tens of thousands of STR cabins on surrounding hillsides use gates operated daily by rotating tourist guests rather than resident owners. A broken gate here is not a minor inconvenience - it is a revenue emergency for property managers protecting $300-$500 nightly bookings. That creates demand for same-day, emergency gate repair at a volume and urgency profile fundamentally different from any neighboring residential city.
The dominant gate-repair clients are steep-hillside vacation rental cabins built from the 1990s onward on wooded, sloped lots with gravel driveways. Conditions here cause chronic post heaving, footing settling, and misalignment for both swing and slide gates. While Pigeon Forge proper sits at roughly 1,000 feet elevation, surrounding cabin ridges reach 2,000-3,000 feet, where winter freeze-thaw cycles heave gate posts and seize hinges. The region also receives approximately 50 inches of rain annually, accelerating corrosion on metal hardware and electrical components. Most gate repair calls are dispatched not by a homeowner on-site but by a remote property management company coordinating repairs between guest check-out and check-in windows. Technicians often need keypad or app-based entry themselves because no one with a key is physically present.
Gate Repair in Pigeon Forge
Most gate repairs in Pigeon Forge run between $180 and $650. Here’s what we typically see:
| Repair Type | Typical Range in Pigeon Forge |
|---|---|
| Gate realignment | $180-$340 |
| Hinge and post repair | $220-$480 |
| Weld and rust repair | $150-$400 |
| Electric opener repair | $190-$520 |
| Loop detector replacement | $120-$250 |
The price you are quoted is the price you pay, and it’s agreed before any work starts. No trip charge inside the county. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
Gate Realignment
Sagging gates are the most common call we get from Pigeon Forge cabin driveways. A gate sags in the hinge post, not in the middle, and on steep gravel lots the post is usually moving. We correct the post footing, then realign the gate so it latches clean and opens without dragging. Typical realignment runs $180 to $340 in Pigeon Forge, and most jobs are done same day.
Hinge & Post Repair
Posts heave here. The freeze-thaw cycles at 2,000 to 3,000 feet on ridges like Wears Valley Road and Upper Middle Creek push posts out of plumb and seize hinges. We reset the footing, weld cracked hinge mounts, and reinforce weak posts so the gate swings true again. Hinge and post repair in Pigeon Forge typically runs $220 to $480 depending on whether the post needs resetting or full replacement.
Weld & Rust Repair
Pigeon Forge gets about 50 inches of rain a year, and metal gates on wooded, sloped cabin lots rust faster than anywhere else in the county. We weld patches, replace rotted gate frames, and grind out rust before it eats through the post. Weld and rust repair usually runs $150 to $400, and we do all welding on-site so the gate is never out of service longer than it has to be.
Electric Gate Repair
Automatic gate openers on rental cabins see daily use from guests who do not know the gate’s quirks. We service Linear, Viking, Ghost Controls, and DoorKing openers, and we stock common parts locally for Pigeon Forge customers. Electric gate repair typically runs $190 to $520 in this market, including opener troubleshooting, limit switch adjustment, and loop detector replacement.
Learn more about our full Gate Repair capabilities.
Why do gate posts heave so often on Pigeon Forge cabin driveways?
Gate posts heave because cabin driveways are cut into steep, wooded slopes where water drains toward the post footing, and winter freeze-thaw cycles at 2,000 to 3,000 feet push the footing out of plumb. The fix is resetting the post in concrete with proper drainage, not just shimming the gate hinges and hoping it holds. Call (877) 610-2993 and we’ll tell you if the post needs resetting.
Can you repair a gate when the property manager is remote and no one is on-site?
Yes - most of our Pigeon Forge calls are coordinated by remote property managers, and we commonly work from keypad codes, app access, or lockbox instructions when no one with a physical key is present. We confirm access before we head to the cabin, and we send photos and a short video of the completed repair when the manager can’t be there. Call (877) 610-2993 and we’ll coordinate the whole thing.
Gate Installation in Pigeon Forge
A driveway gate installation in Pigeon Forge typically costs $2,800-$7,500 for a standard single swing gate, and $5,000-$14,000 for a dual swing or sliding gate with automation. Most jobs take two to five days from footing excavation to final testing. We know that timeline matters because the cabin above you might be booked tomorrow night.
Driveway Gate
The most common gate we install in Pigeon Forge is a driveway gate on a sloped, gravel entry. We dig post footings to 42 inches minimum, set galvanized steel posts in concrete, and size the operator to the gate’s actual weight and wind load, not the box rating. On ridge lots that catch wind off the Smokies, an undersized opener burns out its motor fast. A single driveway swing gate with manual closer runs $2,800-$4,500 installed; adding automation brings it to $4,200-$7,500.
Sliding Gate
Sliding gates work well where a swing gate would hit a retaining wall or dump into the slope. But on gravel driveways with any settling, the track has to be set on a steel-reinforced concrete pad, or the gate will bind within a season. In Pigeon Forge, post heaving from freeze-thaw cycles at 2,000-3,000 feet is the main reason slide gates stop halfway. A sliding gate setup, including the concrete track pad and automation, runs $7,000-$14,000 depending on gate length and terrain.
Swing Gate
Swing gates are the most economical choice for flat or gently sloping entries. We check the hinge post depth first. A gate sags in the hinge post, not in the middle. On Pigeon Forge hillside lots, we often find existing posts set in 18 inches of concrete that have rotated under gate weight. We pull them and do it right. A dual swing gate with a heavy-duty operator typically lands at $6,000-$10,500.
See our complete Gate Installation options.
How do you install a gate at a Pigeon Forge cabin when the property manager is remote?
Most of our Pigeon Forge installations are coordinated remotely. We work with the property manager by phone, enter via a keypad or app-based access code, and stage the job between guest check-out and check-in windows. No one needs to be on site. We send photos and video of the finished gate, test every safety feature, and provide the new gate code or opener instructions electronically.
What type of gate is best for a steep gravel driveway in Pigeon Forge?
A sliding gate usually outperforms a swing gate on a steep gravel driveway because it doesn’t need to arc uphill against gravity. But the track base must be a reinforced concrete pad, not gravel. On Pine Mountain Road, our crew installed a dual swing gate with a LiftMaster operator for a cabin whose old wooden hinge posts had rotted at the footing from 50 inches of annual rain. We poured proper footings and the gate has held level for three years now.
Gate Motor & Opener in Pigeon Forge
Gate motor repair in Pigeon Forge typically runs $240 to $480 for a service call with common part replacement, and most jobs are finished same-day when we can get to the gate before early afternoon. If you’re staring at a gate stuck open on an STR cabin with guests booked for tonight, or half-closed on a hillside driveway off Wears Valley Road, you need a crew that knows these roads and shows up when they say they will.
Motor Installation
A fresh motor installation in Pigeon Forge usually runs $900 to $1,800 depending on how heavy the gate is, whether we’re pulling wheeled or cantilever, and how far the power is from the opener. We run the wire, set the safety edges, and program the limits. If you’re putting a gate on a new STR cabin build off Upper Middle Creek Road, call us before the driveway is graded. It saves rerouting wire through rock later.
Motor Repair
Most motor repairs in Pigeon Forge are diagnosed in under an hour. Capacitors go bad, circuit boards fry from lightning, gears strip. When a Ghost Controls board fails on a cabin gate between a Friday checkout and a Saturday checkin, we treat that as the emergency it is. We quote a price before we touch anything, and the price you hear on the phone is the price on the invoice. A standard operator repair runs $240 to $480.
Linear Motor Service
Linear’s slide-drive openers are common on resort properties along US-441, and they fail in predictable ways: gear wear, limit-switch drift, operator arm fatigue. We service and replace Linear units in Pigeon Forge with the same honesty we’d give a neighbor in Seymour. If the motor can be rebuilt for $350 instead of replaced for $1,400, that’s what we’ll do and we’ll show you the old part to prove it.
Explore our Gate Motor & Opener services.
How fast can you get to a gate motor emergency in Pigeon Forge?
For a stuck-open gate or a gate that won’t close on an STR cabin, we aim for same-day arrival whenever the call comes in before early afternoon. Most calls from The Parkway corridor and up toward Wears Valley Road get a live person immediately, and a scheduled arrival window that same day in most cases. Call (877) 610-2993 the moment you know the gate is down.
What’s the warranty on a gate motor repair in Pigeon Forge?
Every repair and motor replacement carries our 90-Day Done Right Promise in writing. If it is not right, Hal comes back and makes it right. It’s not “up to” 90 days and it’s not buried in fine print. It’s stamped on the invoice with Hal’s name. If your gate is stuck, humming, or dead in Pigeon Forge, call (877) 610-2993 and talk to a person who can tell you what’s wrong.
Gate Access Control in Pigeon Forge
Gate access control in Pigeon Forge is not a luxury upgrade. It is what keeps a $350-a-night cabin rental from turning into a refund request. When a keypad drops its programming at 10 a.m. on a Saturday and the cleaning crew is already behind schedule, the person calling us is not the owner on site. It is a property manager two time zones away watching the check-in clock.
Keypad & Entry System Repair
A keypad reprogramming call in Pigeon Forge typically runs $120 to $180. A new keypad with installation runs $250 to $450 depending on the brand and whether the existing wiring is sound. Heavy spring rainfall on wooded slopes means outdoor keypads and remote receiver boards sit in damp shade and the contacts corrode. You get intermittent dead keypads or a phone entry signal that drops out for two hours and then comes back.
Loop Detector Replacement
Replacing a loop detector that has failed on a gravel driveway runs $300 to $500, and that includes the digging and the new loop wire. A failed loop detector means the gate won’t open for departing guests or arriving cleaning crews. We replace detectors and test them with the gate under load, not just on the bench.
Phone Entry & App-Based Systems
A phone entry system repair runs $180 to $350 for the common fixes. A full phone entry replacement with a new GSM unit runs $800 to $1,400 installed. On resort properties along the Parkway, we also check the warning strobe and loop detectors because tourist traffic is heavy and the liability exposure is real.
Details on Gate Access Control systems and options.
Why does my Pigeon Forge rental cabin gate keypad work for some guests but not others?
The keypad itself is usually fine. The controller has a rolling or user-code list that is out of sync, or one code is set to expire at the wrong time. We see this all the time with property managers who re-use the same four codes and rotate them manually between guests. The fix is a reprogramming call at $120-$180, not a new keypad, unless the contact pad has been physically damaged. Call (877) 610-2993 and we’ll walk you through the symptoms.
Can you repair a slide gate stuck halfway open before my next STR guest arrives?
Usually, yes, if you are inside the county. A slide gate stuck halfway is typically the guide rollers, a bent rack, or a tripped entrapment sensor. We run service calls to Pigeon Forge daily, and we work with the 10 a.m. to 4 p.m. turnover window. We cannot guarantee a same-day fix for every job, but we will tell you honestly on the phone whether it is a two-hour repair or needs parts ordered. Call (877) 610-2993 and we’ll give you a straight answer.
Gate Parts & Welding in Pigeon Forge
A sagging gate on a vacation rental cabin in Pigeon Forge isn’t a weekend project. It’s a booking problem, a security problem, and very often a revenue problem for the property manager watching check-in time get closer. We fix gates fast across Pigeon Forge, including the steep cabin roads off Wears Valley Road and the resort properties along the Parkway, and we answer the phone at (877) 610-2993 around the clock.
Hinge Replacement
When a gate starts dragging or swinging crooked, the hinge is almost always part of the story. We see it constantly on cabins along Upper Middle Creek Road and the ridge roads where gates open and close dozens of times a day. We carry heavy-duty weld-on hinges and bolt-on replacements in the truck, and we can weld a new hinge in place without hauling your gate to a shop. A hinge replacement on a standard residential or cabin gate runs $150 to $350 depending on hinge size and whether we’re welding or bolting.
Post Replacement
A leaning post in Pigeon Forge usually means frost heave or a footing that washed out after a hard rain. You don’t fix that by adjusting the gate. You fix it by pulling the old post, setting a new one properly, and re-hanging. We replace wood, steel, and aluminum posts on cabin driveways and commercial lots throughout the Parkway corridor. Post replacement, including digging out the old footing and setting a steel or wood post in concrete, typically lands between $400 and $800 per post.
Rail Repair & Custom Welding
Rust eats rails from the inside out, especially with roughly 50 inches of rain a year in this part of Tennessee. The lower rail on a swing gate goes first because it sits closest to the wet ground. We weld in replacement rail sections on site, so the gate stays in your driveway and the fix matches the metal. Rail repairs run $200 to $500 for a lower rail or corner joint fix. Custom welding work is quoted by the hour or by the piece, but most custom brackets and reinforcement jobs run $150 to $450.
See what we stock and fabricate on Gate Parts & Welding.
Can you handle emergency gate welding for a vacation rental?
Yes. That’s most of what we do in Pigeon Forge. We’ve welded gates back together between a 10 a.m. check-out and a 4 p.m. check-in more times than we can count. We understand that property managers often aren’t on site and that the person who called us is coordinating by phone from another state. We can often start the same day. Call (877) 610-2993 right away and tell us your window.
What happens if a weld or repair fails after you leave?
We come back and fix it, free, within 90 days. That’s the 90-Day Done Right Promise, and it’s written on every job we do in Pigeon Forge. No arguing about whose fault it was, no “that’s not covered.” If it’s not done right, we make it right.
Brands We Service in Pigeon Forge
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Pigeon Forge rentals, we stock common parts for Linear and Ghost Controls swing gate openers, plus Viking and DoorKing slide gate openers on larger commercial or resort properties. Most brand-specific repairs are completed in one visit because the parts are already on the truck. See our brands for full details.
Pricing for Gate Repair in Pigeon Forge, TN
| Service | Typical Range in Pigeon Forge |
|---|---|
| Gate realignment | $180-$340 |
| Hinge and post repair | $220-$480 |
| Weld and rust repair | $150-$400 |
| Electric opener repair | $190-$520 |
| Loop detector replacement | $120-$250 |
| Single swing gate (manual) | $2,800-$4,500 |
| Single swing gate (automated) | $4,200-$7,500 |
| Dual swing gate with operator | $6,000-$10,500 |
| Sliding gate with automation | $7,000-$14,000 |
| Pedestrian gate installed | $800-$2,200 |
| Motor installation | $900-$1,800 |
| Motor repair (service call + parts) | $240-$480 |
What pushes price up in Pigeon Forge: steep gravel driveways that require post resetting or track reinforcement, elevation work on ridges above 2,000 feet, and gates that need custom welding because rust has compromised the frame. The price you are quoted before work starts is the price you pay. No surprise line items, no invoice bigger than the estimate.
Neighborhoods We Serve in Pigeon Forge
We cover all of Pigeon Forge, including ZIP codes 37863 and 37868. Our crews work the full range of terrain here, from Parkway commercial properties to ridge cabin communities.
- The Parkway (US-441) commercial corridor
- Wears Valley Road corridor
- Upper Middle Creek Road cabin communities
- Walden’s Creek area
- Henderson Springs area
Most Pigeon Forge calls get same-day response when the call comes in before early afternoon, and emergency calls from property managers with trapped guests or blocked check-ins get prioritized.
Service Area - Cities Near Pigeon Forge
We serve Pigeon Forge, TN and the surrounding communities, including Sevierville, TN to the north, Seymour, TN to the west, Jefferson City, TN to the northeast, Eagleton Village, TN, and Newport, TN to the east. Dispatch and scheduling are coordinated from our Memphis office, but the crews serving Pigeon Forge live and work right here in the area.
Serving Pigeon Forge, TN - Our Local Coverage Area
Gatewood Fence & Gate crews serve Pigeon Forge and the communities around it; dispatch is coordinated from our Memphis office. The map shows the Pigeon Forge coverage area; if your address is on it, we can help.
Also serving nearby: Pigeon Forge, TN, Sevierville, TN, Seymour, TN, Jefferson City, TN, Eagleton Village, TN, Newport, TN.
FAQs About Gate Repair in Pigeon Forge
Most residential gate repairs do not require a permit in Sevier County, but new automated gate installations typically do, especially if they involve electrical work or changes to the driveway entrance. We can tell you what the county requires for your specific job and coordinate the paperwork if needed. Call (877) 610-2993 and we’ll walk you through it.
Most of our Pigeon Forge customers are out-of-state owners or property managers. We coordinate access by keypad code, app, or lockbox, perform the repair, and document everything with photos and video. You get the invoice by email and the gate gets fixed before the next guest arrives. It’s the standard way business is done in the cabin rental market here.
We serve the full 37863 and 37868 ZIP codes, which includes the cabin roads off Wears Valley Road, Upper Middle Creek Road, and the ridges around Bluff Mountain. If the road has a name and the gate’s on it, we’ve probably fixed one nearby. Call (877) 610-2993 and a live person will confirm coverage.
Call (877) 610-2993 for a free estimate on any gate repair, installation, motor service, access control, or welding job in Pigeon Forge. A live person answers day or night, and we’ll give you a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pigeon Forge Customers Say
"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim