Gate Repair in Peachtree Corners - Same-Day Repair, Priced Before We Start

Gate Repair in Peachtree Corners, GA

A gate that won’t open in Peachtree Corners isn’t a small annoyance. It’s a car blocking the driveway, a package left at the curb off Peachtree Industrial Boulevard, and a community entrance stuck half-closed while rush hour backs up behind it. Most of the gates across this city went in during the 1980s and 1990s, and they’ve been cycling in Georgia red clay weather for decades. When one fails, we come out, diagnose the problem on the spot, and usually fix it in one trip. Call (877) 610-2993 and a live person answers, day or night.

Call (877) 610-2993

Why Peachtree Corners Homes Are Different

Peachtree Corners grew up as a dense cluster of planned HOA communities around Technology Park Atlanta, mostly built between the late 1970s and the 1990s. That means two things for gate work here. First, there’s an unusually high concentration of residential community gate systems, most of them now 25 to 40 years old, and many are failing at the same time for the same reasons. Second, the gate columns are almost always brick or stacked stone, and they’ve been sitting in Gwinnett County’s expansive red clay for decades. Heavy spring rain soaks that clay and it swells; summer drought bakes it and it contracts. The ground under a gate post shifts, the post leans, the gate binds, and the operator burns itself out trying to fight it. Add high summer humidity to the mix, and exposed hardware on these gates corrodes faster than in drier metro areas nearby. A repair in Peachtree Corners isn’t just swapping a part. It’s understanding why the part failed here, in this soil, under this weather.

Gate Repair in Peachtree Corners

Gate repair in Peachtree Corners usually costs between $225 and $640 depending on whether we’re fixing a sagging hinge post, a dead operator, or an obsolete entry board that finally gave up. Most jobs in the 30092 ZIP code are done the same day we look at them. A large share of communities along Peachtree Parkway and Peachtree Industrial Boulevard still run original 1990s DoorKing and Linear AE telephone entry systems. Those boards are end-of-life, unsupported, and when they fail, the only honest fix is often a modern access-control replacement rather than a patch that buys you six months. Hal Gatewood and his crew handle it all, with the Gate Repair work done in your driveway, not hauled off to some shop two counties away.

Hinge & Post Repair

A gate sags in the hinge post, not in the middle. That’s the first thing we check on a gate in Peachtree Corners. Gwinnett County red clay expands in spring rain and contracts in summer droughts, and over twenty or thirty years that cycle silently tilts gate posts out of plumb. The brick or stacked-stone column looks fine from the outside, but the post has moved enough that the gate binds at the latch or drags on the ground. Hinge and post repair in Peachtree Corners typically runs $225 to $400 depending on whether we’re resetting one post or both. We set new footings and re-hang the gate without tearing apart the masonry.

Automatic Operator Repair

Automatic gate operator repair in Peachtree Corners often comes down to the operator itself. These motors have been opening and closing twenty or thirty times a day for decades, through humid summers and the occasional ice storm. A motor that’s binding or laboring is a warning sign, not a quirk. We check the whole path of the gate: wheels, chain, operator arm, limit switches. Then we fix what’s actually wrong instead of swapping parts and hoping. Automatic gate operator repair, including board replacement and setup, runs $300 to $640 in this market. If the board is obsolete and unsupported, we’ll tell you honestly whether a retrofit now will cost less than a second failure in six months.

Gate Realignment & Weld Repair

Weld and rust repair goes hand in hand with realignment in Peachtree Corners. High summer humidity corrodes hinges, springs, and wiring terminals faster than in drier metros. A gate that’s out of alignment puts uneven load on that corroded hardware, and eventually something gives. We realign the gate to the frame, repair or replace the rusted sections, and weld any cracks in place. Gate realignment runs $250 to $450, and weld and rust repair lands between $150 and $500. We do the work in your driveway in Peachtree Corners. We don’t haul your gate off to a shop two counties away.

Why are so many Peachtree Corners HOA gates failing at the same time?

Peachtree Corners’ planned HOA communities were built primarily between 1978 and 1998, which means their original gate systems are now 25 to 40 years old. The control boards, operators, hinges, and entry systems all hit end-of-life around the same window, so many gates in 30092 are failing within a few years of each other. Call (877) 610-2993 for an honest assessment of whether your gate needs a repair or a replacement.

My brick gate column has shifted and the gate sags. What’s the fix?

We set a new post footing in fresh concrete, then re-hang the gate square and re-align it to the frame. The brick or stacked-stone column stays intact; we work through the gate side and pour around the post. If the column itself is structurally failing, we’ll tell you that honestly and show you what a stub-column repair looks like before we start. Call (877) 610-2993 for a written quote.

Gate Installation in Peachtree Corners

Gate installation in Peachtree Corners typically runs $2,800 to $9,500 for a new driveway or community entrance gate, depending on column condition, gate size, and operator package. Most residential installations are completed within one to three days once materials arrive, and we quote the full price in writing before the first hole is dug. A new gate hung on a tilted column that’s been sitting in red clay for thirty years will bind and wear through hinges within two seasons. That’s why column condition comes first in every quote. For a full look at what’s involved, see our Gate Installation page, or call (877) 610-2993 and we’ll talk through your site.

Driveway Gate Installation

A new driveway gate in Peachtree Corners usually means working with brick or stacked-stone columns from the 1980s and 1990s. We check column plumb and foundation condition before we hang anything. If the column has settled, a new gate on an old column will bind within a season. A single driveway swing gate runs $2,800 to $5,500. We weld the frame, set the hinges deep, and match the gate to your column width and driveway slope.

Sliding Gate Installation

Sliding gates make sense on flatter lots along Peachtree Corners Circle and around Technology Park, where a swing gate would eat too much driveway. A proper slide installation starts with a level track bed and a roller spec matched to the gate weight. We see plenty of slide gates in Peachtree Corners that were installed on undersized rollers, and the result is a gate that grinds along the track and burns operators out early. Sliding gate installations range from $4,200 to $8,000 depending on track length and gate weight.

Double Swing Gate Installation

Swing gates are the most common installation in Peachtree Corners, especially double swing gates at HOA community entrances. Red clay movement is the enemy here. We set posts deep and use through-bolted hinge hardware that can be adjusted years later when the post inevitably shifts a fraction. A double swing gate for a wider entrance or HOA community runs $5,000 to $9,500. We build so the post has somewhere to go before the gate drags.

What kind of warranty comes with a new gate installation in Peachtree Corners?

Every installation carries our 90-Day Done Right Promise in writing: if it isn’t done right, one call brings Hal back to make it right. No fine print. On top of that, the hardware and operator manufacturers carry their own warranties, and we handle any warranty claim for you because we did the install. Call (877) 610-2993 with questions about a current or past job.

Do you cover all Peachtree Corners neighborhoods and HOAs?

Yes, we cover the entire 30092 ZIP code, including communities along Peachtree Parkway, Peachtree Industrial Boulevard, Holcomb Bridge Road, and Peachtree Corners Circle, plus neighborhoods around Technology Park, the Forum, and Jones Bridge Park. If you’re in Peachtree Corners, we’re in your area regularly, and there’s no trip charge inside Gwinnett County. Call (877) 610-2993 to schedule a free measure and written price.

Gate Motor & Opener in Peachtree Corners

When a gate motor dies in Peachtree Corners, it usually dies at the worst possible moment: a swing gate stuck open on a Saturday morning, a slide gate that grinds and stops halfway, an opener that hums but won’t move. For most homes and HOA entrances along Peachtree Parkway and Peachtree Industrial Boulevard, the fix comes down to a motor that’s tired, a board that’s fried, or a foundation that’s shifted. We handle all three, and we carry boards, capacitors, gearsets, remotes, and photo eyes on the truck. Learn more on our Gate Motor & Opener page, or call (877) 610-2993 to talk to Hal about what your gate is doing.

Motor Installation

New motor installation in Peachtree Corners often starts with a simple question: does the column still stand where it was poured? In this part of Gwinnett County, red clay expansion and contraction has tipped more than a few brick columns out of plumb. We won’t bolt a new operator onto steel that’s leaning. A typical swing gate motor installation in Peachtree Corners runs $1,200 to $2,800 depending on gate weight, column condition, and whether the base plate needs resetting.

Motor Repair

Most motor repairs in Peachtree Corners come down to three failures: a control board that got cooked by humidity, a capacitor that gave out, or a gearbox that’s stripped. Summer humidity along the Chattahoochee corridor is harder on exposed electronics than people realize. Typical motor repair in Peachtree Corners runs $180 to $420 for common board or capacitor work, and gearbox work lands between $500 and $700. A repair call often ends the same day it starts.

Linear Actuator Service

Linear actuators power a huge share of the slide gates in Peachtree Corners, especially the 1980s and 1990s HOA entrances off Peachtree Industrial. The actuator arm corrodes, the internal screw wears, and the motor gradually loses torque until the gate won’t fully open. We carry Linear parts locally and service the full lineup, including older models that a lot of companies won’t touch anymore. Linear motor replacement in Peachtree Corners typically falls between $850 and $1,800, with a rebuild option at the lower end.

Battery Backup Retrofit

Peachtree Corners loses power more often than people plan for. Heavy spring storms, summer lightning, and the occasional ice event have left more than one HOA with a gate stuck shut and no way for emergency vehicles to get in. Battery backup retrofit kits keep your gate operating through outages. Most residential retrofits in Peachtree Corners run $350 to $650 installed, and we wire them so the motor reads the backup automatically when line voltage drops.

What if something goes wrong after the repair?

It’s covered. Every motor or opener job in Peachtree Corners gets the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back, no runaround and no invoice games. That promise is stamped on the paperwork, not buried in fine print. For an exact quote on your gate motor or opener, call (877) 610-2993. Estimates are free, and there’s no trip charge inside the county.

Can you come out same day for an emergency gate stuck open?

Yes. A stuck-open gate in Peachtree Corners is a security issue, not an inconvenience, and we treat it that way. Same-day response is available for true emergencies, especially when a motor fails and a community entrance is left exposed. Call (877) 610-2993 and tell us what the gate is doing. We’ll tell you honestly if we can get there today.

Gate Access Control in Peachtree Corners

If you live in Peachtree Corners, you know the routine: a keypad that worked fine yesterday stops reading codes, a remote that opens the neighbor’s gate but not yours, or a phone entry system that rings busy while you stand at the curb. Gate access control in Peachtree Corners typically costs $350 to $2,800 depending on whether we’re repairing an existing system or installing new hardware, and most repairs are done in a single visit. Here’s the specific thing about this city: a large share of gated communities along the Peachtree Parkway and Peachtree Industrial Boulevard corridor still run 1990s telephone entry systems that are end-of-life. Many “repair” calls here turn into full access-control replacements, a pattern we see constantly in Peachtree Corners but rarely in adjacent Norcross or Duluth. Full details are on our Gate Access Control page.

Phone Entry Systems

Phone entry systems let visitors call a number, the resident presses a button on their phone, and the gate opens. Many Peachtree Corners neighborhoods off Peachtree Corners Circle and Spalding Drive still run original 1990s telephone entry units that are now end-of-life. Some can be repaired with replacement boards or keypads. Others need a swap to a VoIP-compatible system, since copper phone lines aren’t coming back. Phone entry system repair runs $280 to $650 when the board is salvageable; a full VoIP-compatible replacement falls between $1,200 and $2,800.

Keypad Entry

Keypads give code-based access without fumbling for a remote. In Peachtree Corners, we install and repair wired and wireless keypads for swing and slide gates, including retrofits onto older operators that never had one. If your keypad works intermittently, the cause is usually terminal corrosion from humid Georgia summers or a loose connection at the operator board. A typical keypad replacement or repair in Peachtree Corners runs $350 to $750. We fix both problems on site.

Card Readers & Fobs

Card readers make sense for gated communities in Peachtree Corners where residents want hands-free entry or property managers need to track who comes in and out. We install proximity card readers, key fob systems, and upgrade kits for existing gate operators so you don’t have to replace the whole gate to gain current technology. A new card reader system usually lands between $900 and $2,200, including the reader, programming, and any controller wiring. Wiring runs, mounting, and programming are included in our quotes.

Do Peachtree Corners HOAs need entrapment protection on automatic gates?

Yes. Automatic gate systems in Georgia are required to meet UL 325 safety standards, which include entrapment protection such as photo-eyes, safety edges, or pressure-sensing devices. Older 1990s systems often predate current standards and may not have modern safety sensing. We inspect every gate we touch and bring it to current UL 325 compliance as part of the repair. Call (877) 610-2993 to schedule an inspection.

Can my 1990s DoorKing or Linear AE entry system be repaired?

If the board is still functioning and the failure is in a relay, transformer, or keypad component, we can often repair the system. But many DoorKing and Linear AE boards from the 1990s are no longer manufactured or supported. When the board itself dies, repair isn’t an option. We’ll give you the repair number and the replacement number side by side, and you decide. Call (877) 610-2993 for a straight answer.

Gate Parts & Welding in Peachtree Corners

Gate parts and welding in Peachtree Corners usually breaks down into two jobs: the part you can see is failing, and the footing or column underneath that’s quietly causing it. We fix both, on site, without hauling your gate off to some shop. If you live in the 30092 ZIP or near Peachtree Parkway, Holcomb Bridge Road, or the neighborhoods around The Forum, you’ve dealt with this already: a gate that drags, a column that leans, a rack that grinds. Hal welds the gate in your driveway, where you can watch the fit before he finishes the bead. See the full range on our Gate Parts & Welding page, or call (877) 610-2993 to describe what you’re seeing.

Hinge Replacement

Hinge replacement in Peachtree Corners is rarely just unbolting an old hinge and putting on a new one. The reason the hinge failed is usually a post that has moved, especially on brick and stacked-stone columns built in the 1980s and 1990s. We weld or bolt the replacement hinge, but we also check post alignment with a level before we call it done. Hinge replacement runs $180 to $420. If the post moved, fixing only the hinge means you’ll fix it again in a year, so we tell you that up front with a price for doing it right.

Post Replacement

Post replacement is the big one in Peachtree Corners, and the part most people don’t see coming. A steel post set in concrete looks fine until you dig down and find the footing has cracked or the post has rusted at grade level. In Gwinnett County’s red clay, a post footing that was poured shallow in 1985 and has been through forty years of wet-dry cycles is often leaning a few degrees. Post replacement with footing work runs $500 to $1,200. We cut out the old post, set a new one to proper depth, and weld the hinge brackets back to match.

Custom Welding

Sometimes the part you need does not exist anymore. A 1990s gate in a Peachtree Corners HOA was built with a specific hinge geometry or a specific bracket that nobody stocks. We fabricate it. Custom welding covers everything from cracked gate frames and broken brackets to mount plates for new operators on old columns. Because we weld on site, you see the fit before we finish the bead. Custom welding jobs in Peachtree Corners most often fall between $300 and $900, and every job is quoted first so there are no surprises at the end.

Why do brick gate columns in Peachtree Corners lean more than those in nearby Norcross?

Peachtree Corners’ planned subdivisions were built densely from the late 1970s through the 1990s, and most of those HOA gate columns were set on shallow footings into Gwinnett County’s expansive red clay. The clay absorbs heavy spring rain and expands, then contracts in summer drought, and after thirty or forty years of that cycle the footing shifts and the column leans. Norcross has more mixed-age housing and fewer 25-to-40-year-old planned community gate systems. Call (877) 610-2993 for a footing inspection and written quote.

Can you repair a sagging swing gate in a Peachtree Corners HOA without removing the brick column?

Yes, and we do it often. We rebuild the hinge post and weld a sag correction bracket in place, keeping the brick column intact. The gate swings true again, and residents keep entering while we work. Post replacement and bracket welding usually falls between $500 and $1,200 depending on the column. Call (877) 610-2993 and we’ll take a look.

Brands We Service in Peachtree Corners

We service the brands most common in Peachtree Corners: FAAC, BFT, Linear, and Viking, plus LiftMaster, DoorKing, Ghost Controls, Elite, and Mighty Mule. We carry boards, capacitors, gearsets, remotes, and photo eyes on the truck, so most repairs don’t wait on a parts order. Check our brands page for the full lineup.

Pricing for Gate Repair in Peachtree Corners, GA

Neighborhoods We Serve in Peachtree Corners

Our crews work throughout the 30092 ZIP, and by now we recognize these streets before the GPS finishes loading. We’re in and out of communities along Peachtree Parkway, Holcomb Bridge Road, and Peachtree Industrial Boulevard every week. Typical response time in the area is same-day for repair calls, and we’ll tell you a window when you call, not after you’ve been waiting an hour.

• Spalding Mill
• Amberleigh
• Chattahoochee Station
• Peachtree Station
• Simpson Mill

Service Area - Cities Near Peachtree Corners

We also handle gate work in the cities around Peachtree Corners, including Johns Creek, GA, Norcross, GA, Duluth, GA, Chamblee, GA, and Doraville, GA. If you’re not sure which area you fall in, just call (877) 610-2993 and we’ll point you straight.

FAQs About Gate Repair in Peachtree Corners

Contact Gatewood Fence & Gate in Peachtree Corners

If your gate is sagging, grinding, or stuck open in Peachtree Corners, call (877) 610-2993 for a free estimate. Hal Gatewood answers with a live person, day or night, and every job carries the 90-Day Done Right Promise in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.