Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Palm Beach Gardens, FL
Gate repair in Palm Beach Gardens usually means a driveway gate that won’t open in Steeplechase, a sliding community entry at PGA National that’s stuck half shut, or an estate gate off Hood Road that started grinding after the last storm. Most residential calls run $165 to $420, and we can often get someone there same-day or next morning. Call (877) 610-2993 and a live person answers, not a recording.
Why Palm Beach Gardens Homes Are Different
Palm Beach Gardens sits four to five miles from the Atlantic, and that salt air works on gate hardware year-round. Hinge pins, pivot points, and motor housings corrode faster here than they do in Wellington or The Acreage. A powder-coated aluminum gate that looks fine from the street can be quietly failing at the welds underneath.
Then there’s the housing stock. Much of Palm Beach Gardens was built between the 1980s and early 2000s as master-planned golf communities. Those Mediterranean Revival and Florida Contemporary homes came with ornate estate gates, and a lot of those gates are now 20 to 30 years old. The hinges are tired, the operators are undersized, and the original builders didn’t always run conduit for future automation. We see it constantly in communities like Frenchman’s Creek and Ibis. Hurricane season piles on top of that. Every fall brings a predictable wave of storm-bent gate arms, misaligned tracks, and water-damaged loop detector wiring. Palm Beach County wind-load requirements mean the repairs have to be done to standard, not just patched.
Gate Repair in Palm Beach Gardens
When a gate stops working in Palm Beach Gardens, the problem is rarely what it first appears to be. A gate that won’t respond to a remote might be a loop detector in the asphalt that got cut by a repaving crew. A gate that sags might have a failing hinge post, not a bent panel. We diagnose before we replace, and we weld on site so your gate stays in your driveway. Learn more about our full Gate Repair service.
Electric Gate Repair
Electric gates east of I-95 take a beating from salt-laden Atlantic air. We see corroded motor housings, fried control boards, and worn limit switches in Frenchman’s Creek and along PGA Boulevard constantly. We repair the motor, replace the board, rewire the junction, and seal everything against the next round of salt spray.
A hinge pin replacement on a standard residential driveway gate in Palm Beach Gardens runs $165 to $280. A failed control board on a Viking or DoorKing operator runs $240 to $500 depending on the board version. We service DoorKing, Elite, and Viking units regularly, and we keep common parts on the truck so we’re not driving back and forth across the county.
Automatic Gate Repair
An automatic gate that won’t respond to a remote, keypad, or access card is a daily frustration. In Palm Beach Gardens it’s often a sign of something deeper than a dead battery, and we trace the problem from the receiver to the board to the motor before we tell you what failed and why.
If the issue is a Ghost Controls or DoorKing board that’s out of production, we can often repair the board itself rather than selling you a whole new system. That’s the difference between a $240 repair and a $1,800 replacement. We also handle HOA community entry systems with dual-lane operators and guard booth integration.
Hinge and Post Repair
Ocean air and powder-coated aluminum don’t always get along. We routinely replace rusted hinge pins and weld cracked gates on estates in Steeplechase and Mirasol where the original gate has been swinging since the early 2000s. If the post is still solid, we repair the gate in place. If the post itself is moving, we set it right.
A full gate realignment with post reshimming and operator re-tuning costs $220 to $380. Every repair over $200 gets $40 off. We quote the full price before any work starts, and the price you get is the price you pay.
Gate Realignment
Hurricane season in Palm Beach Gardens means wind loads that bend gate arms and knock operators out of alignment. A gate that sags is a gate that’s grinding its own hinges to dust. We realign the gate, correct the post lean, and check the operator’s travel limits so it closes cleanly without slamming or catching.
Post-storm calls from communities along PGA Boulevard spike every fall, and we prioritize those repairs because a storm-bent gate is a security hole. Most residential gate repair in Palm Beach Gardens falls between $165 and $420, and a simple hinge replacement or limit switch adjustment lands on the lower end.
How fast can you get to Palm Beach Gardens for a gate repair?
Most Palm Beach Gardens calls are scheduled within 24 to 48 hours, and emergency repairs are handled the same day when we’re already in the area. A live person answers our phone around the clock, and you’ll get a straight answer about when someone will arrive. Call (877) 610-2993.
Do you service HOA community entry gates in Palm Beach Gardens neighborhoods like PGA National and Mirasol?
Yes. Community entry gates are a major part of our work in Palm Beach Gardens. We handle dual-lane entry systems, guard booth integration, vehicle loop detectors, RFID card readers, and multi-gate configurations. We also work directly with HOA boards and property managers. Call (877) 610-2993 for an exact quote.
Gate Installation in Palm Beach Gardens
New gate installation in Palm Beach Gardens typically runs $2,800 to $9,500 for a standard single driveway gate, and $6,000 to $18,000 for a custom double swing or sliding gate with an operator. Most installations take one to two days once the gate and hardware arrive, and we quote the full price before any work starts. See our detailed Gate Installation service page.
In a city with this many gated communities, gate replacement isn’t a weekend project. It’s a measured job with concrete work, operator sizing, and usually an HOA submittal. We handle all three.
Driveway Gate
A driveway gate in Palm Beach Gardens does two jobs: it keeps your home private and it takes a beating from salt air and summer storms. We build and install powder-coated aluminum and wrought-iron driveway gates sized to your approach. In communities off Hood Road and PGA Boulevard, we frequently install estate gates on long approaches, where a heavy-duty swing or slide operator is the difference between a gate that works for fifteen years and one that fails the first time a hurricane-force gust loads the panel.
A single swinging driveway gate with a basic operator in Palm Beach Gardens generally runs $2,800 to $5,500 installed. Custom wrought-iron estate gates in neighborhoods like Steeplechase usually fall between $8,000 and $18,000 because of fabrication time and the larger operators they need.
Sliding Gate
Sliding gates are the standard at community entry points throughout Palm Beach Gardens, from guard booths to resident lanes. We install cantilever and V-track sliding gates rated for the wind loads Palm Beach County requires. A sliding gate’s real long-term reliability comes from the track, the wheels, and the operator bracket. We set those correctly from day one.
Sliding gates for estate lots or community entries run $6,000 to $14,000. The range depends on gate width, track type, and whether you’re adding loop detectors and safety edges.
Pedestrian Gate
Pedestrian gates in Palm Beach Gardens usually sit alongside a driveway gate or at a side yard entry. They take more daily cycles than the driveway gate, which means hinges and latch alignment wear faster here than you’d expect. We install self-closing pedestrian gates with keyed or keypad entry, sized to match your existing fence line and your HOA’s finish requirements.
A pedestrian gate alone runs $900 to $2,400 installed. If you have a community path gate in a development near Mirasol or Ibis, we handle those too, including the underground loop detectors that keep them from closing on someone.
How fast can you install a gate in Palm Beach Gardens?
Most residential gate installations in Palm Beach Gardens are completed one to two days after your gate and hardware arrive. Custom fabrication adds one to three weeks. Call (877) 610-2993 and we’ll give you an honest timeline for your specific gate.
What does a full gate installation include?
A full installation in Palm Beach Gardens includes removal and disposal of the old gate, setting posts or track, installing the new gate and operator, wiring to your panel, and testing every safety feature. The price is quoted in writing before work starts, and it doesn’t change at the door. Call (877) 610-2993 for a free estimate.
Gate Motor & Opener in Palm Beach Gardens
Gate motor and opener work in Palm Beach Gardens usually means one of two things: a single estate driveway gate that’s stopped mid-cycle, or a dual-lane community entry system that’s backing up traffic at the guard booth. A typical motor repair runs $225 to $485, and most slide and swing operator swaps run $850 to $2,400 depending on the gate’s size, weight, and the operator’s duty cycle. Find more details on our Gate Motor & Opener page.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule units. Nine brands, one truck, and the parts to fix most of them same-day.
Motor Repair
Most motor repairs in Palm Beach Gardens are fixable same-day: burned capacitors, worn pinion teeth, failing limit switches, water intrusion in the housing, or a controller board that lost its settings. A typical repair runs $225 to $485, parts included. When we find a motor that’s truly beyond saving, we say so plainly and give you the replacement cost before we do anything else.
Slide Motor
Slide operators handle most of the heavier estate gates and the dual-lane community entries in communities like Mirasol and BallenIsles. We service LiftMaster SL series, BFT, FAAC, and Viking units in Palm Beach Gardens regularly. Slide gates fail differently than swing gates, they depend on clean track, aligned rack, and properly tensioned chain. We check all three before we touch the motor itself.
A new slide operator installed on a residential estate gate runs $950 to $2,200. A community-grade slide operator at a dual-lane entry runs $1,800 to $3,400 depending on brand, duty cycle, and whether we’re also replacing the loop detector or adding battery backup.
Battery Backup Retrofit
After a hurricane knocks out line power, a community entry gate with no battery backup is a security hole. We see it every fall in Palm Beach Gardens. We retrofit battery backup to most LiftMaster SL series and BFT slide operators, and the installed cost here runs $450 to $900.
It’s a worthwhile upgrade in a hurricane-prone area like Palm Beach Gardens, and we quote the full price before any work starts. Every repair over $200 gets $40 off, and seniors and veterans get a permanent 10% discount.
Why does my gate motor keep reversing after the community repaved the entry road?
That pattern after repaving almost always means the underground vehicle-loop detector wires were cut or detuned by the paving crew, a recurring problem at community entries in Palm Beach Gardens. The loop tells the operator when a car is present. When it’s cut, the controller sees phantom signals, and it reverses as a safety default. We test loops before we ever condemn a motor.
Do I need HOA architectural approval before replacing a gate motor in Palm Beach Gardens?
In most gated communities here, yes, if the replacement changes the operator’s appearance, mounting, or electrical footprint. A like-for-like swap of the same model often falls under routine maintenance. We’ll tell you which applies to your specific gate before anyone touches a wire. Call (877) 610-2993 for a straight answer.
Gate Access Control in Palm Beach Gardens
Gate access control in Palm Beach Gardens means keeping gated golf communities, estate driveways, and HOA entry systems working without a key fob scramble every afternoon. Most calls we run in the 33410 and 33418 ZIP codes are a dead keypad, a loop detector that won’t pick up a car, or a legacy operator from the 1990s that finally quit. Read more about our Gate Access Control service.
We diagnose on site and fix what’s actually broken instead of selling you a new system you don’t need.
Keypad Entry
A dead keypad is the most common Palm Beach Gardens service call we run. Older keypads on estate gates around BallenIsles and Frenchman’s Creek get sun-faded, water inside the housing, or worn membrane buttons that stop registering digits. We can usually retrofit a modern keypad onto an existing operator without replacing the whole system.
A keypad replacement in Palm Beach Gardens typically runs $180 to $340 installed, depending on whether we’re wiring a new reader or reusing existing cable. We quote the price before we touch a wire.
Loop Detector Repair
At community entry gates in PGA National and similar developments, the underground vehicle-loop wire gets sliced or detuned when a paving crew resurfaces the lane. The gate then opens phantom-style or won’t detect a waiting car, even though the operator tests fine. A tech who doesn’t know Palm Beach Gardens HOA gates will chase an electrical fault for hours. The fix is a loop splice.
Loop detector repair from repaving damage runs $200 to $380, including re-tuning and testing. That’s a fraction of what a new operator would cost, which is what the gate acts like it needs.
Video Intercom
Video intercom at an estate gate in Palm Beach Gardens lets a homeowner see who’s at the driveway before opening. We install and service wired and wireless intercoms, tie them into existing operators, and position cameras so the midday sun off the Atlantic doesn’t white out the screen.
Video intercom installation starts around $600 for a single estate gate and goes up with camera count and wiring distance. Older systems that predate current wiring standards can often be upgraded without re-trenching cable.
Why does my PGA National community gate sometimes not open when a car pulls up?
That’s almost always a loop detector problem, not an operator fault. In PGA National and similar Palm Beach Gardens communities, repaving crews routinely cut or detune the underground vehicle-loop wire. The operator is fine, but the loop signal never reaches it. We test the loop with a meter, find the splice, and re-tune it on site. Call (877) 610-2993.
How does salt air affect gate access control equipment differently in Palm Beach Gardens than inland Florida?
Palm Beach Gardens sits roughly 4 to 5 miles from the Atlantic, so salt-laden air reaches gate hardware constantly. Control board terminals corrode faster, hinge posts and pivot pins rust, and exposed motor housings pit. That’s why we use sealed enclosures here and treat exposed metal differently than we would inland. Call (877) 610-2993 for an exact quote.
Gate Parts & Welding in Palm Beach Gardens
Gate parts and welding in Palm Beach Gardens usually means one of two things: a tired HOA entry system that needs commercial-grade attention, or an estate gate that has spent twenty years in salt air and finally gave up at the hinge. We handle both, usually same week and often same day. See our Gate Parts & Welding page for details.
Hal welds on site, so your gate stays in your driveway instead of taking a ride to some shop in another county.
Hinge Replacement
Palm Beach Gardens sits four to five miles from the Atlantic. That’s close enough for salt-laden air to sit on everything metal. Gate hinges, pivot pins, and motor housings rust faster here than they do in Wellington or Loxahatchee. We regularly replace hinge sets on estate gates in communities like Steeplechase where the original hardware has lasted 25 years but has finally seized or snapped.
Typical hinge replacement in Palm Beach Gardens runs $220 to $480, depending on gate weight and whether the post needs reinforcement. We weld the new hinges in place while the gate stays put.
Post Replacement
This is the big one, and it’s the one most often missed. A gate sags because the post moves. The post moves because it’s undersized, rotted, or was never set deep enough for Florida’s sandy soil. In newer developments like Mirasol and BallenIsles, builder-grade swing operators were often installed on hinge posts that are two sizes too small for the gate they’re holding.
We dig it out, set a heavier steel post in concrete, and weld everything back square. Post replacement runs $380 to $900, including concrete work and re-welding the gate.
Rail Repair
Slide gates on the big HOA entries take more abuse than anything else in the gate world. They cycle hundreds of times a day. The rack and rail wear down, teeth strip, the gate starts jerking, then reversing mid-cycle. We replace rack sections, weld new rail in place, and realign the rollers.
For the dual-lane systems at communities like PGA National, we can do a rail repair without taking the whole gate out of service. Rail repair in Palm Beach Gardens runs $275 to $650 on most slide gates.
Can you automate a manual gate installed during original construction in Steeplechase?
Yes. Most Steeplechase gates were built without conduit to the gate, so automation requires a full retrofit: trenching from the house to the gate, running electrical conduit, pulling power and control wiring, installing a loop detector or photo eyes, and mounting an operator sized to the gate’s weight. We handle the entire project and give you a written price before any digging starts. Call (877) 610-2993.
Does your welding work comply with Palm Beach County wind-load requirements?
Yes. Every weld we make, every post we set, and every gate we reinforce is done to handle the wind-load requirements Palm Beach County enforces. After a hurricane, we also get a predictable wave of Palm Beach Gardens calls for realignment of storm-bent gate arms and damaged loop detector wiring. Call (877) 610-2993 for a free estimate.
Brands We Service in Palm Beach Gardens
We’re certified to service nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. We keep common parts stocked locally so repairs don’t wait on shipping. See our brands for the full list. Most Palm Beach Gardens repairs are done same-day or next morning.
Pricing for Gate Repair in Palm Beach Gardens, FL
| Service | Typical range in Palm Beach Gardens |
|---|---|
| Hinge pin replacement | $165-$280 |
| Gate realignment with post reshimming | $220-$380 |
| Control board replacement (Viking or DoorKing) | $240-$500 |
| Motor repair | $225-$485 |
| Residential slide operator installed | $950-$2,200 |
| Community-grade slide operator | $1,800-$3,400 |
| Battery backup retrofit | $450-$900 |
| Keypad replacement | $180-$340 |
| Card reader replacement | $220-$400 |
| Loop detector repair | $200-$380 |
| Hinge replacement (welded) | $220-$480 |
| Post replacement | $380-$900 |
What pushes price up in Palm Beach Gardens is the same thing that makes the work different here: salt corrosion eating hardware faster, HOA architectural requirements, and the larger commercial-grade operators at community entries. Every quote is given up front and agreed before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Neighborhoods We Serve in Palm Beach Gardens
We work across Palm Beach Gardens, from the gated golf communities on PGA Boulevard to the estate lots off Hood Road. Most repair calls get same-day or next-morning response, because we’re already working in the area most days.
- PGA National
- Mirasol
- BallenIsles
- Steeplechase
- Ibis Golf & Country Club
Service Area - Cities Near Palm Beach Gardens
While this page focuses on Palm Beach Gardens, FL, our crew also covers the surrounding communities regularly. We serve Lake Park, FL, North Palm Beach, FL, Riviera Beach, FL, The Acreage, FL, and West Gate, FL. Dispatch and scheduling are coordinated from our Miami office, and crews serve Palm Beach Gardens locally.
Serving Palm Beach Gardens, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve Palm Beach Gardens and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the Palm Beach Gardens coverage area; if your address is on it, we can help.
Also serving nearby: Palm Beach Gardens, FL, Lake Park, FL, North Palm Beach, FL, Riviera Beach, FL, The Acreage, FL, West Gate, FL.
FAQs About Gate Repair in Palm Beach Gardens
Most repair calls in Palm Beach Gardens are scheduled within 24 to 48 hours, and emergency calls are handled the same day when we’re in the area. A live person answers the phone 24/7, and we give you a straight answer about arrival time. Call (877) 610-2993 for scheduling.
Most gate repairs don’t need a permit, but new installations and major structural work can, especially on gated community entries. We can tell you what applies to your specific job after we look at it. We also prepare HOA submittal documents when the architectural review board requires them.
Yes, and we do it regularly. We coordinate with security and property management offices, follow the board’s approval chain, and time the work around gate traffic so residents aren’t locked out. If your board needs a written assessment before approving a repair, we provide that too. Call (877) 610-2993.
If your gate is stuck, sagging, or won’t respond, call (877) 610-2993 for a free estimate. Hal Gatewood or one of his guys will come out, tell you exactly what’s wrong and what it costs, and fix it right the first time. No surprise invoices, no pressure, no runaround. Just a gate that works.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Palm Beach Gardens Customers Say
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks"Beautiful gate and solid work. The build took about three weeks longer than the estimate because he was waiting on the ironwork, and I would rather have known that at the start than found out along the way."
- Beatrice Nwosu