Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Northridge, OH
Gate repair in Northridge typically costs $180-$850 depending on whether you’re fixing a sensor, a motor, or a post that’s shifted in earthquake-disturbed soil. Most urgent repairs get same-day or next-morning response when you call (877) 610-2993, and every job carries our 90-Day Done Right Promise in writing. Northridge’s unique problem is that concentrated wave of 1994-1997 post-quake rebuilds: thousands of gates installed at the same time are now failing together, with footings heaving, motors burning out from Valley heat, and iron frames racked out of square.
We’re Gatewood Fence & Gate, locally owned and owner-operated since 2001. Hal Gatewood answers calls live 24/7, and our crew shows up with a welder, not a sales pitch. If your gate is dragging, grinding, or dead in the driveway, we’ll tell you honestly whether it’s a $180 capacitor or a $1,200 full operator replacement, and you’ll know before we touch a wrench.
Why Northridge Homes Are Different
Northridge sits in the San Fernando Valley’s heat dome, where summer days routinely push 100-110°F. That heat cooks gate operator boards and degrades rubber drive belts faster than coastal manufacturers expect. Fall Santa Ana winds sweep through the passes, bending lightweight aluminum gates and snapping older welded joints on iron units. And beneath every gate lies the real story: soil disturbed by the 1994 magnitude-6.7 earthquake, then hastily repacked for the rebuilding wave that followed.
The housing stock tells the tale. South and central Northridge is dominated by 1950s-1970s suburban ranch homes, many damaged or demolished in ’94 and rebuilt with iron or aluminum driveway gates as standard. Those mid-90s installs used footings poured quickly on unsettled ground, and now that concrete is heaving, tilting, and cracking. The gate looks broken; often the footer is the real problem. We’ve worked from the Northridge Plaza area off North Dixie Highway up toward the larger lots near the hills, and the pattern is the same: post-quake infrastructure hitting end-of-life in synchronized waves no neighboring city shares at this scale.
Gate Repair in Northridge
When a gate fails in Northridge, the cause is usually one of three things: thermal stress on the electronics, physical shift in the post or frame, or a safety system doing its job too well because something else is wrong. We diagnose on site, fix what’s actually broken, and weld on site so your gate never leaves the driveway. Our Gate Repair crew serves all Northridge ZIP codes: 91324, 91325, 91327, and 91330.
Electric Gate Repair
Electric gate operators in Northridge take a beating that spec sheets don’t account for. Day after day of 100-plus-degree sun on the motor housing cooks control boards and degrades internal wiring. We service FAAC, BFT, Linear, and Viking operators, along with the other major brands. Most electric gate repair calls here come down to a dead capacitor, a baked control board, or a safety sensor knocked out of alignment. A bad capacitor or limit switch repair typically runs $180-$340, diagnosed and fixed on site rather than swapping parts that still have life in them.
Hinge & Post Repair
A sagging gate sags in the hinge post, not in the middle. That’s where we start. We weld on site, so your gate stays in your driveway. No hauling it off to some shop across the Valley while you’re stuck with a gap in your fence. Hinge and post repair, including on-site welding, runs $350-$850 depending on how much steel needs cutting and whether we’re resetting a post in new concrete.
Gate Realignment
If your gate scrapes the ground on one side, or the latch no longer lines up with the post, the frame is racked. Northridge gates are prone to this because of that quake-era construction wave: concrete footings poured hastily, posts set in loosened ground, and now heave and tilt showing up decades later. Realigning means re-plumbing the post, not just bending the frame. Full gate realignment with post re-plumbing ranges $450-$1,100, and we check the reveal from top to bottom before we leave.
How fast can you get to Northridge for a gate repair?
We typically reach Northridge homes the same day you call, often within a few hours depending on the time and what’s already scheduled. A live person answers at (877) 610-2993, gives you a real ETA, and sticks to it.
Do you offer a warranty on gate repairs in Northridge?
Every repair carries our 90-Day Done Right Promise in writing. If the same problem returns within 90 days, we fix it at no charge. One call brings Hal back, no runaround. Call (877) 610-2993 for a free estimate.
Gate Installation in Northridge
New gate installation in Northridge starts with understanding what the ground has already done to the last one. We measure, price, and schedule; we don’t promise same-day install because proper work takes time. A standard single driveway gate runs $2,800-$5,600 installed, and every quote is written and agreed before we touch the site. Our Gate Installation team knows the difference between a gate that looks straight and one that stays straight after its first Northridge summer.
Driveway Gate Installation
Driveway gates in Northridge run from 1990s iron rebuilds to newer aluminum units on the north end where lots open up. We install both, and we pay close attention to how the gate hangs. A standard single driveway gate typically runs $2,800-$5,600 installed, depending on material, width, and whether the existing posts are reusable. If we’re adding a motor, that’s another $900-$2,200 for a quality opener, wired properly rather than draping a cord across your driveway.
Swing Gate Installation
Most Northridge driveway gates are swing gates, usually double gates for wider openings on post-quake rebuilds. A double swing gate typically runs $3,500-$8,000 installed, including posts and hinges. We build for the heat and the Santa Anas. Lightweight aluminum bends under fall wind gusts, so we steer you toward gauge metal that won’t deflect. And we set posts below the disturbed soil line so they don’t shift the way the 1990s ones have.
Sliding Gate Installation
Sliding gates make sense where a swing gate would eat too much driveway space or where the drive slopes up from the street. The track matters most. Many slide gates from the 1994-1997 rebuilding rush were hung on posts set in earthquake-disturbed soil; decades of settling racked the frames out of square, so the gate drags on the track long before the motor fails. We fix that at the root when we install: repour the footer, plumb the post, then hang the gate. Sliding gate installation runs $3,200-$7,500.
How much does a driveway gate cost in Northridge?
A single driveway gate in Northridge runs $2,800-$5,600 installed, while a double swing gate runs $3,500-$8,000. The bigger variable is footing condition from those 1994-1997 rebuilds, and we’ll price that plainly before we start. Call (877) 610-2993 for a free measure.
Do you replace just the gate and keep my old opener?
Yes, if the opener is still sound and compatible. We don’t swap parts that don’t need swapping. We’ll test your current motor, hinges, and posts, and if only the gate needs replacing, that’s all we’ll quote. If it’s a Viking or DoorKing unit on its last legs, we’ll tell you honestly.
Gate Motor & Opener in Northridge
A dead gate motor in Northridge gets old fast, especially when you’re backing out toward morning traffic or the Valley heat is already building. We fix, replace, and upgrade gate motors and openers across all four Northridge ZIP codes. A typical motor repair runs $180-$380, and a full replacement with new arms and remotes runs $1,100-$2,400. Our Gate Motor & Opener service stocks parts for FAAC, BFT, Linear, Viking, and the other major brands locally, so we’re not ordering and making you wait.
Motor Repair
Most “dead motors” in Northridge are actually something else: a cooked capacitor, a stripped gear, a limit switch knocked out of adjustment, or a board baked by Valley heat for one summer too many. We diagnose on site and repair what’s repairable. Hal would rather solder a connection or replace a limit switch than sell you an operator you don’t need. Most Northridge motor repairs land between $180 and $380, and when the motor genuinely is done, we’ll show you why before we quote a replacement.
Motor Installation
New motor installs in Northridge should account for two things most national outfits skip: the heat and the ground. A motor mounted on a gate near a driveway in August sits in 100-plus-degree air for hours, so we wire and set operators with thermal load in mind. If the post is racked from years of settling, we tell you before we hang a new motor on it. A straight install on sound posts runs $900-$1,800 for most Northridge swing gates.
Slide Motor Service
Slide gates on Northridge’s older ranch homes often run on motors retrofitted after the fact, with wiring run under cracked concrete or stapled to stucco a little too casually. We service and install slide operators with an eye to what the last guy left behind. Slide motor swaps typically run $1,400-$2,600, and we re-use your existing track and wheels whenever they’re sound. You don’t pay for parts you don’t need.
What does it cost to replace a gate motor in Northridge?
A full motor and opener replacement in Northridge typically runs $900-$2,400, right in line with the rest of the San Fernando Valley. More jobs here include post reset or footer repair because so many gates date to the post-quake rebuild years. We’ll tell you upfront if yours needs that extra step. Estimates are free; call (877) 610-2993.
Can you install a motor on a gate that doesn’t have one yet?
Yes. We add motors and openers to existing manual gates all over Northridge, including older wrought-iron swing gates and newer aluminum slide units. The job includes the motor, mounting brackets, safety edges where needed, and running power if there isn’t an outlet nearby. Prices start around $900 for a basic swing gate operator.
Gate Access Control in Northridge
If your keypad stopped working after last week’s heat or the remote works only when you’re standing ten feet away, you’re dealing with a Northridge-specific problem: gate electronics installed during the 1994-1997 post-earthquake rebuild are now failing in clusters. We see it weekly across Northridge, from the ranch homes south of Nordhoff to the larger custom lots up toward the hills. Hal has been fixing gate access systems since 2001, and he’s the person who answers when you call. Our Gate Access Control service covers keypads, remotes, phone entry, and card readers.
Keypad Entry
A keypad on a Northridge driveway gate lives in brutal conditions. Summer heat soaks the circuit board, fall Santa Ana winds drive fine dust into the housing, and winter rain works into any crack in the sealing gasket. Keypad replacement with new weatherproof housing runs $240-$420 installed, depending on brand and whether we’re pulling fresh wire through a sunbaked gate post. We also handle the re-wiring that older Northridge homes usually need after years of heat-brittled insulation.
Remote Control
When your remote works only from ten feet away and used to work from sixty, the receiver is usually failing or the antenna got pinched when a gate post shifted after quake-era settling. On Northridge lots near the hills, we also see interference from newer wireless garage door systems on neighboring properties. Remote transmitter programming and receiver service runs $110-$220, and Hal’s fix is often a fresh receiver paired with the remotes you already own. No forced upgrades.
Phone Entry Systems
Phone-based gate entry is popular on Northridge’s larger custom properties north of Devonshire, where the driveway gate sits a few hundred feet from the house and hardwired intercom lines aren’t practical. We install and service systems that ring your real phone number, so you can talk to whoever is at the gate and open it remotely. Older cellular gate boxes from the mid-2000s are now hitting 3G and 4G sunset issues; we swap those for current technology. Phone entry system upgrades run $380-$750.
Can you come today if my gate won’t open at all?
If your keypad, remote, or phone entry fails and leaves you locked out or stuck open, we’ll treat it as an emergency and get to your Northridge address the same day in almost every case. Call (877) 610-2993 as soon as you notice the problem. The sooner we know, the sooner the gate is working.
How does gate access control pricing in Northridge compare to nearby cities?
Our pricing is the same across Northridge, Vandalia, Dayton, Huber Heights, and Riverside. The only variables are your gate’s brand, the age and condition of its wiring, and whether the post needs re-setting. We tell you the number up front and it’s a handshake at the door, not a surprise after the work.
Gate Parts & Welding in Northridge
Most gate failures in Northridge aren’t motor failures at all. The hinge post has shifted in soil that hasn’t settled since 1994, or a rail weld cracked during a Santa Ana wind event, and the whole system binds up. That’s the work we do. We weld on site, so your gate stays in your driveway, and we fix before we replace. Our Gate Parts & Welding service covers hinges, posts, rails, rollers, latches, and custom fabrication.
Hinge Replacement
In Northridge’s older ranch neighborhoods, original 1960s gate hinges are often welded to the post rather than bolted. When those fatigue and crack, the gate drops and drags on the concrete. We cut the old hinge off, align the gate to the post, and weld in a heavier replacement. A typical hinge replacement runs $180-$340, including steel and labor. If the post itself is leaning, we’ll tell you before we touch the hinge, because fixing the hinge without fixing the post means you’ll fix it twice.
Post Replacement
A gate sags in the hinge post, not in the middle. Northridge has a lot of quake-era gate posts set in footings poured quickly in 1995 and 1996, and those footings are now heaving and cracking. We cut the post out, break out the old concrete, pour a new footing, and set the post true. Post replacement with new footing typically runs $400-$850, depending on whether we’re dealing with a 4-inch steel post or a larger square tube that needs deeper anchoring.
Rail Repair & Custom Welding
The bottom rail is the workhorse of any iron driveway gate, and it’s the first thing to rust through or crack at the weld points. Northridge’s summer heat cycles put thermal stress on those joints. A cracked or rusted-through rail gets cut out and replaced with new steel welded in place, generally $150-$400. For ornamental scrollwork or custom latches nobody manufactures anymore, we weld on site at $85-$120 per hour plus material, and we tell you the estimate before the torch lights.
Can you come out for an emergency welding repair in Northridge?
Yes. When a gate drops off a hinge or a weld snaps and leaves the driveway blocked, call us at any hour and a live person answers. We’ll tell you what’s safe to do and what to leave alone. High-tension gate springs and heavy iron frames under load can injure someone badly; don’t try to force a dropped gate back into position. Let a trained professional handle it.
How do your welding prices compare to other gate companies around Northridge?
Our hinge replacements and rail repairs run about the same as other local shops, but we tend to fix rather than replace, so the total bill is usually lower. The 90-Day Done Right Promise also means you’re not paying for the same repair twice. If it’s not done right, we make it right. No haggling, no fine print.
Brands We Service in Northridge
We stock parts and are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Northridge homes with FAAC, BFT, Linear, or Viking operators, we carry common capacitors, control boards, and limit switches on the truck, which means most brand-specific repairs don’t wait for shipping. See our brands for full details on each line.
Pricing for Gate Repair in Northridge, OH
| Service | Typical range in Northridge |
|---|---|
| Sensor / remote service call | $95-$180 |
| Electric gate repair (capacitor, limit switch) | $180-$340 |
| Hinge replacement | $180-$340 |
| Motor repair | $180-$380 |
| Remote / receiver service | $110-$220 |
| Rail repair / reinforcement | $150-$400 |
| Keypad replacement | $240-$420 |
| Hinge & post repair with welding | $350-$850 |
| Post replacement with new footing | $400-$850 |
| Gate realignment with post re-plumb | $450-$1,100 |
| Swing gate motor installation | $900-$1,800 |
| Full operator replacement | $1,100-$2,400 |
What pushes price up in Northridge is almost always footing condition from those 1994-1997 quake-era installs. Disturbed soil, hastily poured concrete, and 30 years of thermal cycling mean a “simple” motor swap often reveals a post that needs resetting. We tell you before we start, and the price we write down is the price you pay. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Neighborhoods We Serve in Northridge
We work all over Northridge. If you’re near Northridge Plaza or off North Dixie Highway, you’ve probably seen our truck. Same for homeowners around Timberlane Drive, the streets feeding Riverside Drive, and the older ranch blocks toward the Stillwater River. Typical response in Northridge is same-day or next-morning for urgent repairs.
- Northridge Estates
- Timberlane area
- North Dixie Highway corridor
- Riverside Drive area
- Sarah Drive / Crestview
Service Area - Cities Near Northridge
We dispatch and coordinate from our Cleveland office, and crews serve Northridge locally every day. We also work in Vandalia, OH, Dayton, OH, Huber Heights, OH, Riverside, OH, and Trotwood, OH. If you’re in Northridge, OH or any of these nearby communities, the same live answer, same upfront pricing, and same 90-Day Done Right Promise apply.
Serving Northridge, OH - Our Local Coverage Area
Gatewood Fence & Gate crews serve Northridge and the communities around it; dispatch is coordinated from our Cleveland office. The map shows the Northridge coverage area; if your address is on it, we can help.
Also serving nearby: Northridge, OH, Vandalia, OH, Dayton, OH, Huber Heights, OH, Riverside, OH, Trotwood, OH.
FAQs About Gate Repair in Northridge
Most gate repairs don’t require a permit, but new installations or structural post replacements sometimes do depending on your HOA or local code. We know the common requirements in Northridge and can tell you during the free estimate whether your job needs paperwork. If it does, we’ll point you toward the right office.
Call (877) 610-2993 any time, day or night. A live person answers, takes your information, and gives you a real arrival window. For urgent repairs, we typically reach Northridge homes same day or next morning. Installation and scheduled work is measured, priced, and booked at your convenience.
Yes. We cover 91324, 91325, 91327, and 91330, from the flatter central neighborhoods up to the hill-adjacent streets. There’s no trip charge inside the county, so a call from any Northridge address costs the same.
Ready to get your gate working right? Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate. We’ll give you an honest diagnosis, a written price before any work starts, and the 90-Day Done Right Promise on every job. Hal Gatewood answers live, 24/7.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Northridge Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond