Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Motor & Opener Across Mableton
A gate motor replacement or opener repair in Mableton typically costs $260-$680 for the motor work itself, and on most slide-gate or swing-gate jobs we can have a crew at your property same day when you call before noon. Whether your community entrance gate off Floyd Road has seized up or your driveway swing arm groans and reverses mid-travel, the fix starts with a live person on the phone at (877) 610-2993, then a written quote you approve before any work begins. We know Mableton’s subdivisions, its shared driveways, and the red clay that slowly pushes gate posts out of plumb, because we have been working these streets for years.
Why Gatewood Fence & Gate Is Mableton’s Preferred Gate Motor & Opener Company
Hal Gatewood started this business in 2001, and his name still goes on every invoice. That matters in Mableton, where a lot of gate work sits in HOA subdivisions built in the late 1990s and early 2000s; those builder-spec operators are all hitting the end of their service life at roughly the same time, and a company that has seen these exact models for two decades is a very different thing from one that sends a van with a tablet and a list of part numbers.
Every job we do in Mableton, from a single-driveway swing motor off Veterans Memorial Highway to a shared slide-gate operator in a subdivision off Mableton Parkway, carries our 90-Day Done Right Promise in writing. If it is not done right, one call brings us back. No runaround, no call center, no voicemail at midnight. A live person answers our phone 24/7, and the person who shows up in the driveway will have a name and a face you will recognize if you run into him at the hardware store. Inside Cobb County, there is no trip charge, and we offer a free second opinion on any written estimate from another company.
Our Gate Motor & Opener Services in Mableton
Motor Installation
A new gate motor for a Mableton home or HOA entrance runs roughly $850-$2,400 installed, depending on whether you need a light-duty swing opener for a single driveway or a heavy slide operator built for daily cycling at a community entrance. We install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we match the motor to the gate’s weight, cycle count, and the way Mableton’s storm season beats on electronics. Before the first bolt goes in, you know the full price.

Motor Repair
Most gate motor repair calls in Mableton are thermal overload trips from a motor fighting a post the red clay has shifted, or dead control boards after a lightning surge. We repair on site. Hal welds in your driveway, and we fix the motor rather than hauling the whole operator off and handing you an invoice for a replacement you did not need. A typical repair runs $180-$480, and the $40-off-any-repair-over-200 offer applies on the spot.

Linear Motor
Linear slide and swing operators are common in the 1990s HOA subdivisions along the South Cobb corridor, and we stock legacy Linear control boards, limit switches, and gear sets so a repair does not become a two-week wait for a part that is out of production. When a block of homes in Providence or along the Veterans Memorial corridor all used the same builder-spec Linear unit, one service call often turns into a neighborhood run, and we are set up for exactly that.

Slide Motor
Mableton is full of tight lots and shared rights-of-way where a swing gate simply will not fit, so slide gates do most of the work. A slide motor installation here runs $1,100-$2,800 depending on the gate’s length and weight. The common failure is a rack-and-pinion losing alignment when the concrete pad shifts, and we handle that in the driveway, shimming and re-aligning rather than replacing. Back in the Providence subdivision off Floyd Road, we pulled a failed 1999 builder-spec LiftMaster slide operator from a shared driveway gate where the rack teeth were worn smooth and the loop detector was gone. Because the whole block used the same hardware, we stocked the legacy control boards, swapped the motor and a new safety photocell, and kept that neighborhood’s only vehicle entrance open through the whole job.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mableton
We are certified on Linear, Viking, Ghost Controls, and DoorKing, plus LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Because so many Mableton subdivisions were built by the same handful of regional developers within a few years, entire blocks often run identical operators. That means we keep legacy control boards and gear kits on the truck for the exact units we see again and again along Mableton Parkway, Veterans Memorial Highway, and Floyd Road. You are not waiting on an internet order from a warehouse three states away.
Common Gate Motor & Opener Problems We See in Mableton Homes
- Red-clay heave under 1990s HOA gate posts. Mableton’s clay expands and contracts with every wet-dry season, slowly leaning hinge posts and forcing swing-gate motors to bind and trip thermal overloads during summer storms.
- Lightning-surge board failures. Thunderstorm lightning knocks out ungrounded operator control boards in subdivisions built before surge suppression was standard. The first clue is a dead keypad and a gate that will not respond from any remote.
- Shared-driveway slide gates stuck mid-travel. On narrow rights-of-way, a concrete pad shift breaks the rack-and-pinion alignment and the gate freezes halfway open, blocking both vehicle and pedestrian access. This is a same-day repair priority for us.
- Worn builder-spec motors from the late 1990s. Those original gate operators are at 25 to 30 years old. The gearboxes are stripped, the capacitors are weak, and the loop detectors stop reading vehicles, which is why so many Mableton gates start failing in clusters.
Pricing for Gate Motor & Opener in Mableton, GA
Here is what Mableton homeowners and HOAs can expect. A straightforward swing-opener repair runs $180-$480. A new residential swing or slide motor, installed, runs $850-$2,400 for most driveways. Heavy community slide gates run $1,100-$2,800 installed. Battery backup systems add $300-$700 depending on the operator. A new intercom or keypad integrated with the gate runs $400-$1,100 including wiring and programming. The price you are quoted is the price you pay, agreed in writing before we pick up a tool. Estimates are free, we do not charge a trip fee inside Cobb County, and seniors and veterans always get 10 percent off. Call (877) 610-2993 for an exact quote on your gate.
We Also Serve Cities Near Mableton
Our Gate Motor & Opener crew works Mableton and the surrounding communities every week, so if you are just over the line in Austell, Smyrna, Lithia Springs, or Fair Oaks, the same live-person phone number applies and the same 90-Day Done Right Promise stands. Our scheduling is coordinated from the Atlanta metro office, but the truck that shows up at your gate is local to the South Cobb area. Read more about our coverage across Mableton and the neighboring towns we serve.
Serving Mableton, GA - Our Local Coverage Area
We’re based in the Mableton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Mableton
Because the late-1990s and early-2000s HOA subdivisions along the South Cobb and I-20 corridors were built by the same few regional developers, often with identical builder-spec gate operators installed in the same year. Those units are now reaching their 20-to-30-year service-life cliff at the same time, so when one fails, neighbors follow within a season. We keep legacy parts for the exact LiftMaster, Linear, and FAAC models most common in those subdivisions, which shortens your repair from weeks to same day. Call (877) 610-2993 and tell us what operator your HOA used; chances are we already know it.
Usually not for a straight motor repair or operator swap, but Mableton incorporated as a city in January 2023, and gate-repair permitting and inspection authority is still transitioning from Cobb County legacy codes to the city’s new municipal framework. That creates a gray area no neighboring city faces, and we route slide-gate and motor work through the right side of it based on the latest local guidance. For new gate installations that change electrical service or add a pedestal, the requirements are different, and we will tell you plainly what applies before the job starts.
Yes, and those shared-right-of-way slide gates are a large share of our Mableton work. The key is handling vehicle and pedestrian access so the gate keeps working while we work, and on shared driveways that often means we phase the job: remove and swap the motor assembly first, keep the gate on manual operation for the briefest window, and restore automatic operation before we leave. We also wire dual remotes and keypads at both homes so neither household is locked out. A shared-driveway slide operator installation in Mableton typically runs $1,100-$2,800 installed, quoted in writing before we start.
Yes, when they are sized and maintained correctly. Mableton’s summer storms knock out power long enough that a gate without battery backup strands residents outside or traps them in, and the same storms put surge stress on control boards. A properly installed battery backup keeps your operator cycling through the outage, and we pair it with surge suppression on the board so the lightning that took down the power does not take down the motor with it. Battery backup systems run $300-$700 on most Mableton residential operators. Call (877) 610-2993 for a free estimate, and we will walk the gate with you before recommending anything.
The motor is binding against a post or track that has shifted. On Mableton’s clay, the most common cause is a hinge post out of plumb from seasonal ground movement, which makes the motor draw hard, overheat, and reverse on its safety circuit. On slide gates, the rack-and-pinion has dropped alignment with the concrete pad. The fix is re-aligning and shimming the gate, not just replacing the motor, because a new motor fighting the same shifted post will fail the same way. We diagnose it on site, in your driveway, and you approve the price before we touch the repair.
Your Gate, Your Driveway, Your Quote
Call (877) 610-2993 and Hal or one of his crew will answer. Tell us what the gate is doing, where you are in Mableton, and whether it is a driveway gate or an HOA entrance. We will give you a straight answer on the phone, schedule the visit, and put the price in writing before any work starts. The name is on the shop, the shop is local, and the 90-Day Done Right Promise is on paper. If it is not done right, we make it right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate.





Before
After
Before
After
Before
After