Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Haltom City, TX
Gate repair in Haltom City typically costs $180-$850 depending on whether we’re adjusting a residential chain-link latch or rebuilding a commercial sliding gate track. Most residential calls are same day or next morning, and our phone rings to a live person around the clock at (877) 610-2993. Haltom City’s mix of 1950s-1970s housing stock on shifting Blackland Prairie clay and heavy industrial gates along I-820 creates repair challenges you won’t find in neighboring suburbs, which is why we stock parts for both.
Why Haltom City Homes Are Different
Haltom City sits directly on the Blackland Prairie clay that runs through Tarrant County, and that clay is the quiet villain behind most residential gate failures here. Dry summers bake it until it contracts and pulls away from post footings. Wet springs soak it until it swells and heaves. A post that shifted a quarter inch in July will be out two inches by March, and the gate that hung true now drags a rut in the grass and slams against the latch post.
The bulk of Haltom City’s residential stock dates to the 1950s-1970s post-war boom, featuring modest single-family brick homes on small lots with aging chain-link perimeter fencing and gates whose original steel posts are now prone to rust and ground-heave displacement. Ornamental iron gates are less common here than in wealthier Tarrant County suburbs, keeping most residential gate work focused on chain-link swing-gate hardware and mechanical latches.
North Texas hail adds its own insult. The thin steel tube frames that support a lot of Haltom City gates dent and chip under hail impact, and those impact points are where rust starts. Meanwhile, the dense concentration of auto salvage yards, used car lots, and fleet yards along the Airport Freeway and Belknap Street corridors creates an unusually high demand for heavy-duty commercial sliding chain-link gate repair. Gate technicians here service far more high-cycle, high-load commercial operators than the DFW average.
Gate Repair in Haltom City
Electric gate repair in Haltom City usually means one of three things: a residential chain-link gate that won’t latch because the post leaned again, a commercial slider near I-820 with worn v-groove wheels grinding through the track, or an operator control board that took a power surge during a North Texas storm. We diagnose on site and quote before we start. The 90-Day Done Right Promise covers every repair in writing. Gate Repair is what we’ve built this shop on since 2001.
Hinge & Post Repair
On Haltom City’s 1950s-1970s residential lots, hinge and post failure is the single most common reason a chain-link gate stops latching. Original steel posts rust at the base, or the Blackland Prairie clay heaves them a few degrees out of plumb every spring. We replace rusted posts, reset them in properly compacted footing, and install hinges that don’t require a fight to close. We weld on site, so the gate stays in your yard, not on someone’s trailer headed to a shop. A hinge replacement on a sound post typically runs $180-$320.
Electric Gate Repair
Electric gate operators on Haltom City properties fail most often from high cycle counts and power surge damage, not from neglect. The salvage yards and used car wholesalers near I-820 run their operators harder in a week than a residential gate runs in a year. We repair and replace the operator, the circuit board, the safety edges, and the wiring that connects them. Residential automatic gate operator repair runs $225-$450. If your operator is straining and tripping breakers, call (877) 610-2993 before the motor burns out entirely.
Commercial Sliding Gate Track & Wheel Service
The salvage yards and used-car wholesale lots clustered near the I-820/Belknap interchange run their sliding gates dozens of cycles a day; worn v-groove wheels and debris-clogged tracks are the area’s single most common commercial gate call. Gravel, mud, and metal shavings pack the track, the wheels wear flat, and the operator strains until it trips the safety circuit or burns out. We stock those specific parts for heavy chain-link sliders, which keeps our commercial customers from waiting on a shipment. Commercial sliding gate wheel and track service runs $350-$850 depending on gate weight and track condition.
Why does our commercial sliding gate at a Haltom City salvage yard keep jamming on the track?
The most common cause is worn v-groove wheels and a track packed with gravel, mud, and debris. In the salvage yards and used car lots along I-820 and Belknap, sliding gates cycle dozens of times a day, and the wheels wear flat while the track collects everything the yard kicks up. We replace the wheels, clear the track, and realign the rack and pinion so the operator stops straining. Call (877) 610-2993 for a free inspection.
Our chain-link gate post on a 1960s Haltom City lot leans every spring. Can you fix it so it stays put?
Yes. The post is shifting because Haltom City sits on Blackland Prairie clay that swells during wet springs and shrinks during dry summers. The fix isn’t just straightening the post; it’s resetting it in a properly compacted footing so the seasonal heave stops moving it. We’ve done this on 1950s and 1960s lots all over the 76117 area, and the 90-Day Done Right Promise covers the work in writing. Call (877) 610-2993.
Gate Installation in Haltom City
Gate installation in Haltom City usually runs $1,800-$6,500 depending on whether we’re hanging a single chain-link swing gate at a 1960s brick ranch or building a heavy-duty sliding gate for a salvage yard off I-820. Most residential jobs are done in one day, and commercial sliding gates typically take two to three. If you’re on the fence about whether to patch an old gate or start fresh, call (877) 610-2993 and we’ll give you a straight answer based on what’s actually failing. Gate Installation is measured, ordered, and scheduled, never rushed.
Residential Swing Gates
Swing gates are the most common residential installation we do in Haltom City. Most local homes were built between the 1950s and 1970s, and their original chain-link gates hang on steel posts that have spent fifty-plus years in Blackland Prairie clay. When we install a new swing gate, we’re almost always replacing the posts too. A gate only swings as true as the post that holds it. A single residential chain-link swing gate, 8-12 feet, runs $1,800-$3,200 installed including new posts, hinges, latch, and operator if requested.
Commercial Sliding Gates
Sliding gates are the workhorse of Haltom City’s commercial corridors. The salvage yards and used-car lots clustered near I-820 and Belknap run their gates dozens of cycles a day, which means the v-groove wheels, track, and rack-and-pinion system take a beating no residential gate ever sees. We install and retrofit heavy-duty chain-link sliding gates with components sized for high-cycle use. A commercial sliding chain-link gate, 20-30 feet, runs $4,500-$8,500 installed depending on track length, cantilever requirement, and operator load.
Driveway & Pedestrian Gates
Driveway gate installation in Haltom City usually means one of two things: a chain-link swing gate across a residential driveway on a small lot, or a commercial sliding gate at a business entrance. We measure, order, weld, and install on site. We also handle the operator, keypad, and safety components so the whole system works as one piece. A pedestrian gate alone, no operator, runs $400-$900 installed with post set in concrete.
My Haltom City home has a 1960s chain-link swing gate that leans every summer. Can you just replace the gate, or does the post need work too?
The post is almost always the problem, not the gate. On Haltom City clay, a gate that leans every summer means the footing has shifted or the steel post has rusted through below grade. We set a new post deep in concrete and hang the gate true. If you replace just the gate panel and leave the old post, you’ll be calling again in twelve months. Call (877) 610-2993 for a free measure and written quote.
What does a sliding gate installation cost for a salvage yard off I-820?
A heavy-duty chain-link sliding gate for a commercial lot in the I-820 corridor runs $4,500-$8,500 installed, depending on gate length, track condition, and whether we’re also replacing the operator. Yards that cycle gates dozens of times daily need components sized for high-load use, which costs more than a residential operator but lasts years longer. Call (877) 610-2993 for a free site walk and written quote.
Gate Motor & Opener in Haltom City
Gate motor and opener repair in Haltom City usually means one of three things: a worn slide gate wheel on a commercial slider off Belknap, a rusted hinge post on a 1960s chain-link swing gate, or an obsolete control board nobody makes parts for anymore. We handle all three. Most jobs are same day when we’re already working the I-820 corridor. Gate Motor & Opener service includes diagnosis, repair, replacement, and integration with whatever access control you already have.
Motor Repair & Replacement
Most Haltom City gate motor repair calls are either a bad capacitor, a seized bearing, a faulted control board, or a limit switch that’s drifted out of adjustment. On older swing gates, the motor itself is rarely the first thing to fail. The hinge post rots at the base, the gate sags a half inch, and the motor binds until the overload trips repeatedly. We fix the post first, then re-align the operator. A typical gate motor repair runs $185-$340 depending on the part and re-alignment work.
Slide Motor Service
Slide gate motors in Haltom City handle more cycles per day than nearly any neighboring city, thanks to the auto salvage yards and fleet lots along Belknap Street and the I-820 corridor. We replace slide operators for chain-link sliders, cantilever gates, and track-style driveway gates. A full slide motor replacement on a commercial gate runs $1,400-$2,600. Slide gate wheel replacement on a commercial chain-link slider usually lands between $220 and $400 per wheel set.
Linear Arm & Battery Backup
Linear arm operators on residential and light commercial swing gates are common across Haltom City’s 1950s-1970s housing stock. When a linear motor fails, it’s usually the internal drive screw, limit switch, or the arm locking mechanism. We service and replace linear operators on-site. A residential linear arm operator installation typically costs $650-$1,200. North Texas storms knock out power at the worst times, so we also install inline battery backup systems that add $280-$600 to keep the gate working through short outages.
My 1970s chain-link swing gate in Haltom City leans and the opener struggles-can you just replace the motor?
No, not if the hinge post is rusted through at the base. Replacing the motor on a gate with a failing post means the new motor will bind against the same misalignment and fail again, usually within a few months. We’ll repair or replace the post first, re-hang the gate level, then assess the motor. Sometimes the motor itself is fine and only needed the gate to stop sagging. Call (877) 610-2993.
Our commercial slide gate at a used car lot near I-820 makes a grinding noise and sometimes reverses. What’s wrong?
That’s almost always worn v-groove wheels or debris in the track. Gravel, tire rubber, and metal shavings pack into the track over time, the wheels wear flat, and the gate drags. The motor then strains, the rack and pinion skips, and the operator faults out or reverses. We clear the track, replace the worn wheels, and reset the motor’s current sensing so it doesn’t fight the gate. Call (877) 610-2993.
Gate Access Control in Haltom City
Gate access control in Haltom City means keypads, remotes, phone entry, card readers, and video intercoms that keep working when the clay soil shifts and the tracks fill with windblown debris off the salvage yards. We respond to Haltom City calls same day in most cases, and a live person answers when you call (877) 610-2993. Gate Access Control is about matching the right hardware to how your gate actually gets used.
Keypad & Remote Entry
Keypad entry is the workhorse for Haltom City’s residential chain-link swing gates. The problem we see over and over is a keypad that works fine until the gate post leans. When a dry summer pulls moisture out of the soil, the post moves. The gate no longer closes on the magnetic lock sensor, the keypad thinks the gate is open, and nothing works. We fix the post first. Residential keypad entry runs $650-$1,100 including the controller. Remote control add-ons for existing openers run $200-$450.
Phone & Card Entry
Phone entry systems are the standard for Haltom City fleet yards and warehouses where employees rotate shifts and visitors change daily. The most common failure we see near the I-820 corridor is the cellular or landline module losing signal inside metal buildings. Residential phone entry runs $900-$1,800 installed, and commercial phone entry runs $2,000-$4,500. Card readers make sense when you have multiple people coming and going at odd hours; a new commercial proximity card reader with controller runs $1,200-$2,200 installed.
Video Intercom Integration
Video intercom is the access control upgrade that keeps a Haltom City homeowner from having to walk outside at night to see who is at the gate. More than half the residential video intercom installs we do in Haltom City are on properties that already have a working gate but no camera. A basic single-family video intercom with a 7-inch indoor monitor and night vision runs $1,800-$3,200 installed.
Why do my Haltom City commercial slide gate wheels wear out so fast near Belknap?
Because those gates cycle dozens of times a day and the tracks collect grit, shredded rubber, and loose gravel blown off the auto yards. V-groove wheels are the single most common commercial gate call we answer in Haltom City. The fix is usually new wheels, a deep track clean, and a liner adjustment, and we stock those parts locally. Call (877) 610-2993 and we’ll inspect the track before we quote.
Can you install a keypad entry on a swing gate with a leaning post in my Haltom City yard?
Yes, but we fix the post first. The clay soil in Haltom City shrinks in the summer and swells in the spring, and that seasonal movement is what leaned your post in the first place. A keypad installed on a leaning post will work for a few weeks and then fail on the sensor. We reset the post, then mount the keypad. Call (877) 610-2993.
Gate Parts & Welding in Haltom City
Gate parts and welding in Haltom City usually means one of two things: a chain-link swing gate on a 1960s home that has drifted out of alignment again, or a heavy sliding gate at a salvage yard off Belknap that runs forty cycles a day and just chewed through another set of v-groove wheels. We handle both, and most jobs are done on site with a welder running off our truck, not hauled back to a shop. Gate Parts & Welding is where we fix what other companies want to replace.
Hinge & Rail Repair
Chain-link swing gates in Haltom City live and die by their hinges. The original hardware on those 1960s posts was often thin strap steel that has spent 60 years rusting and flexing. When a gate drags in the dirt or the latch will not catch, the hinge is almost always part of the story. We cut the old hinge off, weld on a heavier replacement, and set the gap so the gate swings clean. A hinge replacement on a sound post typically runs $120-$200. Rail repair on a standard walk gate runs $90-$180.
Post Replacement
This is the job nobody in Haltom City wants to hear they need, and the one we do more than almost anything else. The expansive clay under this part of Tarrant County shrinks and swells enough to move a concrete footing over time, and when the post leans, the gate leans with it. We remove the old post, dig and pour a deeper footing, and set a new post that is sized for the gate it carries. A residential post replacement runs $350-$600 depending on how deep the old footing goes and how much concrete has to come out.
Custom On-Site Welding
Not every gate repair is a swap. When a hinge tab breaks off a post, a v-groove wheel bracket cracks on a salvage yard slider, or a corner joint on an ornamental frame starts pulling apart, the right fix is a weld. We weld on site with a mobile rig, in Haltom City driveways and commercial yards alike. On the commercial slide gates along the I-820 and Belknap corridors, we routinely weld fresh v-groove wheels onto worn axles and rebuild track plates instead of selling somebody a whole new gate. Custom welding starts around $75-$100 for a simple crack or broken tab repair, and heavy commercial slide gate work like v-groove wheel replacement starts around $250.
Can you weld a broken hinge tab on my gate without taking the gate off the property?
Yes. We bring a mobile welder to your gate, whether it’s a residential swing gate in the 76117 ZIP or a commercial slider off Belknap. The gate stays where it is, we weld the tab or bracket on site, and you get a written price before we strike an arc. Heavy repairs on commercial gates start around $250. Call (877) 610-2993.
How do I know if my rusted post can be saved or needs full replacement?
Tap it with a wrench near ground level. If it rings solid, we can often weld reinforcement on site. If it thuds or flexes, the rust is structural and a new post is the only honest fix. We’ve seen posts that looked fine above ground and were paper-thin at the base on Haltom City’s 1960s lots. We’ll tell you which it is before we quote. Call (877) 610-2993.
Brands We Service in Haltom City
We are certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for Viking, Ghost Controls, and DoorKing operators locally, which means a failed board or limit switch on a commercial slider near I-820 doesn’t wait on a cross-country shipment. Most brand-specific repairs in Haltom City are completed in a single visit. our brands
Pricing for Gate Repair in Haltom City, TX
| Service | Typical Range in Haltom City |
|---|---|
| Residential hinge & latch repair | $180-$320 |
| Residential automatic gate operator repair | $225-$450 |
| Post replacement & resetting (residential) | $250-$500 |
| Commercial sliding gate wheel & track service | $350-$850 |
| Residential swing gate installation (single, 8-12 ft) | $1,800-$3,200 |
| Residential double swing gate installation | $3,200-$5,500 |
| Commercial sliding gate installation (20-30 ft) | $4,500-$8,500 |
| Pedestrian gate installation (no operator) | $400-$900 |
| Gate motor repair (residential) | $185-$340 |
| Commercial slide motor replacement | $1,400-$2,600 |
| Residential keypad entry installation | $650-$1,100 |
| Video intercom (single-family residential) | $1,800-$3,200 |
What pushes price up in Haltom City: deep clay excavation for post footings, commercial track replacement on gates that cycle dozens of times daily, and retrofitting safety entrapment protection on pre-UL 325 operators. The price we quote is the price on the invoice, agreed in writing before any work starts. No trip charge inside the county, $40 off any repair over $200, and a free second opinion on any written estimate you’ve already gotten.
Neighborhoods We Serve in Haltom City
We work all over Haltom City, from the quiet residential blocks near Broadway Avenue to the commercial slots along Belknap Street and Airport Freeway. Typical response time for a repair call in Haltom City is same day or the next morning, depending on when you call and how the schedule sits.
- Neighborhoods off Broadway Avenue
- Glenview Drive area
- Denton Highway corridor
- Commercial properties along Belknap Street and I-820
- Everywhere within the 76117 zip code
Service Area - Cities Near Haltom City
We run repair trucks through the central Tarrant County corridor daily. If you’re just outside the city line, we probably already have a job nearby. We also serve Richland Hills, TX, Watauga, TX, North Richland Hills, TX, Saginaw, TX, and Fort Worth, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Haltom City locally.
Serving Haltom City, TX - Our Local Coverage Area
Gatewood Fence & Gate crews serve Haltom City and the communities around it; dispatch is coordinated from our Dallas-Fort Worth office. The map shows the Haltom City coverage area; if your address is on it, we can help.
Also serving nearby: Haltom City, TX, Richland Hills, TX, Watauga, TX, North Richland Hills, TX, Saginaw, TX, Fort Worth, TX.
FAQs About Gate Repair in Haltom City
Residential gate replacement on existing posts usually does not require a permit in Haltom City, but new installations or commercial gates may need one through the city. We can tell you which category your job falls into when we measure, and we’ll point you toward the right desk if paperwork is needed. Call (877) 610-2993 and we’ll walk you through it.
Most repair calls in Haltom City are same day or next morning. Commercial fleet yards near I-820 and Belknap get priority when a gate is stuck open, because that’s a security issue, not just an inconvenience. A live person answers the phone 24/7, so you’re not waiting on business hours to get on the schedule. Call (877) 610-2993.
Yes. We work with several Haltom City-area HOAs on perimeter gate maintenance and access control upgrades. We know the drill: written scope, written price, work done during approved hours, and documentation for the property manager. If your HOA has a gate that keeps failing, we’ll diagnose it and give the board a straight assessment of repair versus replacement. Call (877) 610-2993.
Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate on any gate repair, installation, motor service, access control, or welding job in Haltom City. A live person will answer, we’ll give you an honest assessment of what your gate actually needs, and you’ll get a written price before any work starts. The 90-Day Done Right Promise applies to every job, and Hal’s name is on the shop if you ever need to find us.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haltom City Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield