Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Grand Prairie
When your gate motor quits in Grand Prairie, you don’t need a national call center or a three-day wait. You need someone who knows the difference between a clay-shifted hinge post in 75051 and a discontinued hydraulic operator on a warehouse off I-30. That’s what we do. Gatewood Fence & Gate has been fixing and installing gate motors and openers for homeowners and businesses across Grand Prairie for years, with a live person answering every call at (877) 610-2993 around the clock. Hal Gatewood’s name is on the shop, his truck rolls through your neighborhood, and he stands behind every job with a written 90-Day Done Right Promise. Call and you’ll get a straight answer, a real appointment window, and a price quoted before any work starts.
We cover every Grand Prairie ZIP code: 75050, 75051, 75052, 75053, and the Mountain Creek communities in 75054. The Great Southwest Industrial District, the ranch-home neighborhoods along Carrier Parkway, and the gated subdivisions off Lake Ridge Parkway all have different gate systems and different failure patterns. We know which is which before we ever pull up to your curb.
Why Gatewood Fence & Gate Is Grand Prairie’s Preferred Gate Motor & Opener Company
Hal Gatewood started this shop in 2001. He still answers the phone himself half the time, and when he doesn’t, one of his crew does. No voicemail tree, no dispatcher three states away. You call, a person picks up, and they know what a slide gate motor is. That matters when your gate is stuck open at 6 a.m. and delivery trucks are stacking up outside your distribution center in 75050.
Our reputation in Grand Prairie is built on showing up when we say we will and fixing the actual problem instead of swapping parts that didn’t fail. Hal’s approach is repair-first. He’d rather weld a cracked bracket back square in your driveway-part of our Gate Parts & Welding in Grand Prairie-than haul your gate to a shop and leave you without security for a week. When a gate sags, it sags in the hinge post, not in the middle. That’s where we start. Fix the panel without the post and you’ll fix it twice.
We’re certified on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We also build retrofit mounts for operators that manufacturers discontinued years ago, which is a bigger deal in Grand Prairie than most places. More on that in a minute.
Every job carries the 90-Day Done Right Promise in writing. Not a verbal wink. Not fine print. If something isn’t right, one call brings Hal back. His address is published, his license number is on every invoice, and he’s been at it since 2001. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Motor & Opener Services in Grand Prairie
Motor Installation
A new gate motor in Grand Prairie runs $1,300 to $4,200 installed, depending on the gate type, length, weight, and whether you need a swing arm, slide rack, or in-ground piston operator. Our Gate Installation in Grand Prairie covers new gates and retrofits on existing ones. In the newer Mountain Creek subdivisions of 75054, most of what we install are slide gate motors on perimeter walls, sized for daily vehicle traffic and wired for battery backup. In the older ranch neighborhoods of 75050 and 75051, we’re usually retrofitting swing gate operators onto gates that were never motorized, which means beefing up the posts first so the motor doesn’t tear itself loose in the clay soil. No trip charge inside the county. The price is quoted and agreed before any work starts.
Motor Repair
Most Grand Prairie Gate Repair jobs for motors run $180 to $680. That covers control board replacement, limit switch adjustment, gear and sprocket swaps, loop detector troubleshooting, and safety photocell alignment. The repair-first philosophy means we test the capacitor before replacing the board, and we inspect the gearbox before ordering a whole new operator. A typical service call in Grand Prairie is 1 to 2 hours on site, and we keep common Viking, Ghost Controls, DoorKing, and Elite parts stocked on the truck so we can finish most repairs in one visit. If your opener housing cracked and water got into the board, we’ll show you the damage before we quote the fix.
Linear Motor Replacement
Linear arm motors on swing gates in Grand Prairie usually fail because the gate itself is out of plumb. The Blackland Prairie clay under 75050 and 75051 heaves and shrinks with every season. A post that moves a quarter inch puts the whole geometry off, and the linear arm takes the abuse. We replace Linear and equivalent-brand swing-arm operators for $950 to $2,400 installed, and whenever we do, we check and shim the hinge posts. Putting a new motor on a leaning post just guarantees a second failure. Hal won’t do that to you, and he won’t pretend he didn’t see the real problem.
Slide Motor Service
Slide gate motors are the bread and butter of Grand Prairie’s industrial corridors. The Great Southwest Industrial District along I-30 and SH-161 has thousands of high-cycle chain-link and steel slide gates on warehouse and distribution center perimeters. Those run $1,800 to $5,500 to replace depending on gate length and cycle duty, and many of them are running obsolete operators from the 1980s and 1990s. We repair what can be repaired: gearboxes, limit shafts, drive chains, loop detectors. When parts are discontinued, we fabricate retrofit mounts so a modern motor can live where the old one died. That’s a specialty almost nobody else in Grand Prairie offers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grand Prairie
We carry parts and service Viking, DoorKing, Ghost Controls, and Elite locally in Grand Prairie. Hal has run Viking hydraulic slide gate operators, DoorKing card-access gates, and Ghost Controls residential systems all over the Metroplex since 2001, and he knows which boards fail, which gearboxes wear, and which brands still have parts for their old stuff. We keep common control boards, photocells, and remote kits on the truck, so when we show up at a Grand Prairie address, we usually leave the same day with the gate cycling. If a part isn’t on the truck, we can usually have it by the next morning.
When you call for gate motor and opener service, you get the person who actually does the work, not a middleman. We’re your local Gate Motor & Opener shop, and we treat your gate like it’s our own.
Common Gate Motor & Opener Problems We See in Grand Prairie Homes
- Clay-shifted hinge posts: Grand Prairie sits on Blackland Prairie clay that shrinks in the summer drought and heaves back with spring rain. That shrink-swell cycle tilts posts, throws hinges out of plumb, and makes swing gate motors bind and burn out. We fix the post first, then the motor.
- Loop detector failures on industrial gates: At warehouse perimeters around I-30 and SH-161, a failed loop detector leaves the gate frozen open or closed. Delivery trucks stack up, and managers call us in a hurry. We troubleshoot the loop, replace the detector, and get the gate cycling again.
- Hail-cracked opener housings: Grand Prairie spring hailstorms crack plastic and aluminum housings on south-facing gates, especially in 75052 and 75053. Water gets in, shorts the control board, and the gate stops dead. We replace the housing, dry out and test the board, and add weather protection for the next storm season.
- Obsolete control boards: Homes and warehouses built in the 1980s and 1990s often have operators that manufacturers no longer support. We fabricate retrofit mounts and wire modern control boards into existing gates, saving you the cost of a full replacement when the gate itself is still solid.
One example sticks with us. We pulled a 1988 Viking hydraulic slide gate operator from a warehouse perimeter off Jefferson Street in the Great Southwest Industrial District (75050) after a loop detector failure left it frozen mid-cycle. The control board was long discontinued, so our tech fabricated a retrofit mount for a modern Viking actuator, added a safety photocell pair, and wired the existing keypad entry back in. The gate now cycles 200+ times a day without missing a beat. That kind of job doesn’t exist in Irving or Duncanville’s residential stock. It’s a Grand Prairie specialty.
Pricing for Gate Motor & Opener in Grand Prairie, TX
Here’s what we actually charge in Grand Prairie, no games:
- Motor repair (control board, limit switch, cap): $180 to $680
- Swing gate arm operator replacement: $950 to $2,400 installed
- Slide gate motor replacement (residential): $1,800 to $3,500
- Industrial slide gate operator retrofit: $3,000 to $5,500 depending on cycle duty
- New motor installation (full system): $1,300 to $4,200
- Battery backup system install: $400 to $1,100 added to a gate motor
- Intercom and keypad integration: $250 to $900 additional
The price you’re quoted is the price you pay. We put it in writing before any work starts, and we take $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Estimates are free, and there is no trip charge inside the county or anywhere in Gate Motor & Opener in Grand Prairie service territory. If you have a written estimate from another company, we’ll give you a free second opinion. No pressure. Just straight numbers from someone who stands behind them.
We Also Serve Cities Near Grand Prairie
Gatewood Fence & Gate serves Grand Prairie and the surrounding communities, including Arlington, Mansfield, Duncanville, and Cedar Hill. Same owner, same crew, same 90-Day Done Right Promise. Hal has been fixing gates around Grand Prairie and the Metroplex since 2001, and his reputation reaches every corner of it. If you’re in a neighboring city, give us a call. We’ll drive to you.
Serving Grand Prairie, TX - Our Local Coverage Area
We’re based in the Grand Prairie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Grand Prairie
We can usually repair it, yes. Discontinued hydraulic and pneumatic slide gate operators from the 1980s and 1990s are common along the Great Southwest Industrial District, and we repair the gearbox, limit shaft, pump, and manifold before we recommend a full replacement. When the control board is truly obsolete, we fabricate a retrofit mount for a modern Viking, DoorKing, or Elite operator and wire your existing keypad and loop detectors back in. A full retrofit typically runs $3,000 to $5,500. A repair on the existing unit is usually $300 to $900. Call (877) 610-2993 and we’ll give you a straight answer on your specific gate.
Yes, in most cases we can. The lean in 75051 is almost always from the expansive clay soil shifting the post, not from the gate panel failing. We dig out the old post, set a deeper one in concrete, square the gate, and reweld the hinge brackets. That runs $400 to $1,200 depending on post depth and gate weight. Sometimes the gate frame is too rusted to save, and we’ll be honest about that. But Hal’s repair-first approach means we don’t replace a gate that just needs its post fixed. Call (877) 610-2993 for a free estimate.
Yes. We install battery backup systems on slide gates throughout Mountain Creek and the broader 75054 corridor, so your gate keeps working during power outages and after storms. A battery backup system added to a slide gate motor runs $400 to $1,100 installed. We test the system under load, replace the batteries on a schedule, and wire it so the gate fails safe, not locked shut. Call (877) 610-2993 and we’ll spec it for your exact gate.
Your homeowner’s insurance may cover the motor repair if the hail cracked the housing and water damaged the control board, but it depends on your deductible and policy specifics. We’ll document the damage with photos and write a repair quote your adjuster can use. The housing and board replacement on a typical Grand Prairie gate motor runs $200 to $600. The cracked housing itself is usually a $80 to $180 fix if we catch it before water gets in. Call (877) 610-2993 and we’ll inspect it and give you the documentation you need.
In 75050, nine times out of ten it’s a failed loop detector or a worn limit switch on an older operator. The loop detector tells the gate when a truck is waiting, and when it fails, the gate either stays open or stays closed. We test the loop field, replace the detector if needed, and inspect the limit shaft and gearbox on the same visit. A loop detector replacement in Grand Prairie runs $200 to $450. Most distribution center calls in the Great Southwest Industrial District are back up and cycling same day. Call (877) 610-2993 and we’ll get someone out to you fast.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie since 2001.