Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Fayetteville
When a gate motor fails in Fayetteville, you don’t need a phone tree - you need someone who knows that the red clay under your brick pillars has shifted again, and why your 2003 Elite operator is suddenly grinding. Fayetteville Gate Repair for gate motors and openers typically runs $180 to $480 for common failures like capacitor burnouts, control board corrosion, and limit switch replacement. Full motor replacements on custom estate gates usually land between $900 and $2,400 depending on the operator brand and whether we’re re-plumbing posts or adding intercom hardware. Call (877) 610-2993 and you’ll get Hal or someone who works directly with him, not a recorded greeting.
Why Gatewood Fence & Gate Is Fayetteville’s Preferred Gate Motor & Opener Company
Hal Gatewood has been fixing gates since 2001, and he’s still the person whose name goes on the invoice. That matters in Fayetteville, where a lot of the work sits behind brick pillars on Redwine Road, New Hope Road, and the estate subdivisions off Ga. Highway 92. We know these gates because we’ve welded on them, rewired them, and stood in the driveway while the afternoon thunderstorm rolled in. Our Gate Motor & Opener crew rolls into 30214 and 30215 with a truck stocked for the brands Fayetteville actually runs: LiftMaster, FAAC, Viking, and plenty of legacy Elite and Apollo parts for the early-2000s installs.
Every job carries the 90-Day Done Right Promise in writing. That’s not a marketing line - it’s Hal’s name on the work. We answer the phone at 2 a.m. the same way we answer it at 2 p.m. If the gate won’t open and your car is stuck inside, someone picks up.
We come with background-checked, uniformed people who have our published address in their pocket and our license number on the truck. The Fayetteville homeowners we serve tend to appreciate that kind of accountability, especially the ones who’ve been quoted one price over the phone by some national outfit and handed another number at the door. We quote a price, you agree to it, then we start. Nothing changes in the driveway unless the scope changes and you approve it first.
Our Gate Motor & Opener Services in Fayetteville
Motor Installation
Gate Installation - Fayetteville for swing and slide gate motors on custom and semi-custom homes, most of them built between 1990 and 2015 with ornamental iron or aluminum gates hanging from brick or stone pillars. A proper install here means accounting for the clay: the operator has to be set so it tolerates seasonal post movement without burning itself out. We handle underground operators for heavy swing leaves, pad-mount slide motors, and full retrofits where an old Apollo gets swapped for a modern FAAC or LiftMaster with current UL 325 entrapment sensors. Installation typically runs $1,100 to $3,800 in Fayetteville depending on gate weight, operator type, and how much electrical or concrete work is involved.
Motor Repair
Most Fayetteville repair calls come in one of two flavors: the motor runs but the gate barely moves, or the motor does nothing at all. The first is usually a failing capacitor or worn gearbox; the second is often a fried control board or a limit switch that gave up after years of fighting a shifted post. We repair before we replace - Hal’s whole philosophy is fixing the gate in your driveway rather than hauling it off. Typical motor repairs in Fayetteville run $180 to $480, including the service call inside Fayette County. No trip charge inside the county, and $40 off any repair over $200 as a standing offer.
Linear Motor
Linear arm operators show up all over Fayetteville, especially on the mid-2000s builds where the builder wanted a clean look without a bulky pad mount under the gate. They’re reliable machines, but the armature and gear set take a beating when the gate leaf starts sagging toward the latch side. We service Linear motors with factory-grade parts and re-tune the leaf alignment so the new parts aren’t inheriting the same fight. If you’re in 30215 and your Linear motor sounds like it’s working harder in July than it did in January, that’s the humidity eating at the terminals, not your imagination.
Slide Motor
Slide gates are common on Fayetteville’s horse-farm properties and on lots with steep driveway grades where a swing gate would drag. We service chain-drive and rack-and-pinion slide motors from Viking, DoorKing, and Ghost Controls, and we’re familiar with the specific problem Fayetteville throws at them: clay heave under the track. When the concrete pad shifts a half inch, the chain jumps teeth or the gate starts slamming the end stop. We grind and re-shim the track, re-tension the chain, and get the gate gliding again. Slide motor repair here typically runs $220 to $650; full slide operator replacement is usually $1,400 to $3,200.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fayetteville
We’re certified to service nine major gate brands, and the ones we see most in Fayetteville Gate Parts & Welding calls are LiftMaster, FAAC, Viking, Elite, and the occasional Ghost Controls on newer installs. The original Apollo, Linear, and Elite operators from the 1990s and early 2000s estate boom are hitting end-of-life right now, all at the same time - which is why we keep legacy parts on the truck for Fayetteville service calls instead of waiting on a warehouse order. When the gate won’t close on a Sunday, waiting a week for a capacitor is not acceptable. Hal keeps the common failure parts stocked because he knows exactly what Fayetteville runs.
Common Gate Motor & Opener Problems We See in Fayetteville Homes
- Brick pillar shift from red clay expansion. Fayette County’s clay soil swells in winter wet and shrinks in summer dry, and over 20 years that cycles brick footings far enough out of plumb to throw a swing gate leaf off by inches. The operator keeps forcing the gate closed, and the motor burns out prematurely. Fixing this means re-plumbing the post and re-hanging the leaf - then installing the new motor.
- Control board corrosion from humidity and storms. Summer thunderstorms with 90% humidity push moisture into outdoor operator boxes all over 30214 and 30215. We regularly find control board terminals green with corrosion, causing intermittent “gate won’t respond” symptoms that come and go with the weather.
- End-of-life operators from the estate boom. The Apollo, Linear, and Elite swing gate motors installed as builder upgrades in the mid-1990s through about 2007 are now 20 to 30 years old. They’re past their design life, and most lack modern entrapment protection. When they fail, repair is often possible - but we’ll be straight with you about whether a $300 capacitor patch is throwing good money at a machine that’s about to fail elsewhere.
- Rust-pitted hinges and sagging ornamental iron. Custom wrought iron gates in Fayetteville look beautiful but the Georgia humidity rust-pits the hinge pins and hinge plate welds over the years. A sagging leaf overloads the motor and smokes the gear set. We weld on site and re-hang the leaf so the new motor isn’t inheriting a structural problem.
Pricing for Gate Motor & Opener in Fayetteville, GA
Here’s what we charge in Fayetteville, and we tell you the number before any work starts:
| Service | Typical Fayetteville Range |
|---|---|
| Motor repair (capacitor, limit switch, board replacement) | $180 - $480 |
| Swing gate motor replacement (single leaf, standard residential) | $900 - $1,800 |
| Heavy custom swing gate operator (including underground operator) | $1,600 - $2,400 |
| Slide gate motor replacement | $1,400 - $3,200 |
| Video intercom / keypad / RFID integration | $450 - $1,500 |
| Battery backup installation | $300 - $700 |
The big variables in Fayetteville are gate weight, post condition, and whether the job needs concrete work, a new power run, or matched intercom and safety-edge hardware. Our quote is free, it’s in writing, and the number we quote is the number you approve. Standing offers: $40 off any repair over $200, no trip charge inside Fayette County, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Fayetteville
Our crews work throughout Gate Motor & Opener in Fayetteville and the surrounding communities, including Tyrone, Irondale, Lovejoy, and Riverdale. If you’re just outside the county line, call anyway - the no-trip-charge area covers most of the immediate vicinity. 30214, 30215, and the roads in between are where we spend most of our time.
Serving Fayetteville, GA - Our Local Coverage Area
We’re based in the Fayetteville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Fayetteville
Because the problem is in the post, not the operator. The red Georgia clay under Fayette County swells after heavy rain, shifting your brick pillar footing a fraction of an inch. That’s enough to throw the gate leaf out of alignment, so the operator starts fighting the leaf instead of moving it. We re-plumb the post and re-hang the leaf before we touch the motor - otherwise you’ll burn out a new operator the same way the old one died. If your gate binds after every rain, call (877) 610-2993 and we’ll find the footing that’s moving.
Yes. We integrate video keypads, card readers, phone-app access, and full intercom kits with almost any existing operator in Fayetteville, including older Apollo, Linear, and Elite models that predate smart-home compatibility. The Trilith Studios production crowd has made video keypad and RFID integration one of the most common requests we field in 30214, and we stock the hardware to do it same-week. Expect $450 to $1,500 depending on how many entry points you need covered. Estimate is free - call us at (877) 610-2993 and we’ll ladder the hardware to match what you already have.
Usually, yes - and not because we want to sell you a motor. A 20-year-old operator that’s getting louder is telling you the gear set is worn, the capacitor is weak, and the board is on borrowed time. It also predates current UL 325 entrapment standards. We’ll give you an honest assessment: if the gate is sound and the post is solid, a new operator with fresh sensors is the right call for a gate you use daily. A standard single-leaf replacement in Fayetteville runs $900 to $1,800 installed. We’ll quote you a number before we do anything.
If your gate is your only way in and out of the property, yes - especially in Fayetteville, where summer afternoon storms knock out power regularly. A battery backup keeps the gate cycling for a couple dozen cycles during an outage, and it’s cheap insurance compared with being trapped outside your own driveway when a transformer pops on Redwine Road. We install battery backup kits for most major brands for $300 to $700. Hal will tell you if your existing operator can take one, and call (877) 610-2993 for a quick answer.
Because the repaving changed the surface height under the gate’s travel path, which shifted how the gate weight rides on the track - or the paver nicked the track and knocked it out of alignment. In Fayetteville’s clay, even an inch of new asphalt changes the loading on a slide gate’s chain and sprocket. We’ve seen it on horse-farm slide gates in rural 30215 and on subdivision entries off Ga. Highway 85. The fix is re-leveling the track, re-shimming the concrete pad if needed, and re-tensioning the chain. Call (877) 610-2993 - slide gate track alignment is something you want done before the chain strips.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fayetteville and Fayette County since 2001.