Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Davie
Gate motor and opener work in Davie usually costs between $285 and $1,800 depending on whether you’re repairing a control board, replacing a residential operator, or fitting a commercial-duty opener to a 400-pound pipe-rail swing gate on a horse property. Most residential repairs are completed in one visit and Hal Gatewood will be the one quoting the job, not a rotating crew. We’ve worked Davie’s equestrian roads and HOA subdivisions long enough to know the difference between a 1978 manual gate and a modern LiftMaster slide system before we even open the truck door. Call (877) 610-2993 and a live person answers, any hour.
Key takeaways:
– Same-day response to Davie from our South Florida crew, with a real person on the phone around the clock
– We repair before we replace and most operators on 1960s-80s gates can be retrofitted
– Commercial-duty openers are baseline on Davie horse properties, not an upsell
– Every job carries the 90-Day Done Right Promise in writing
– No trip charge inside the county, $40 off any repair over $200, free second opinion on any written estimate
Why Gatewood Fence & Gate Is Davie’s Preferred Gate Motor & Opener Company
Gatewood Fence & Gate has been locally owned and owner-operated since 2001, and our Gate Motor & Opener work in Davie is done by people whose names you can verify. Hal Gatewood’s name is on the shop and on every invoice, and his published address means you can drive over and look him in the eye if you want to. That’s the oldest accountability there is.
Davie customers call us because we fix what other companies want to swap out. A gate sags in the hinge post, not in the middle, and that is where we start. On a 1970s equestrian estate off Shotgun Road, we rebuilt a sagging pipe-rail swing gate by replacing the rotted hinge post with a deeper concrete footing, then fitted a FAAC 400 hydraulic operator with new safety photocells and a loop detector, because the original 1978 manual hinges had failed at the post, not the panel. That is the repair-first approach we bring to every Davie property, whether it’s a ranch parcel or an HOA-managed slide gate in a newer subdivision.
We carry parts for the operators Davie actually uses and we stock what we need so we’re not waiting on a distributor in another county. Strong local reputation, background-checked crew, and a live person answering the phone 24/7, not a voicemail or a call center three states away.
Our Gate Motor & Opener Services in Davie
Motor Installation
New motor installation in Davie runs from $650 to $1,800 for most residential systems, and from $1,400 to $3,200 when a horse-property gate demands a commercial-duty operator. We always quote the exact number before any work starts, in writing, and that’s the number you pay. On Davie’s equestrian-zoned roads, we default to 500+ lb capacity openers because a double pipe-rail swing gate easily exceeds 400 lbs per leaf.
Motor Repair
Most motor repairs in Davie fall between $285 and $700. That covers failed control boards, stripped gears, capacitor replacements, and limit-switch resets on brands like LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We’ll tell you plainly if the motor is worth repairing or if you’re throwing money at a board that’s been discontinued.
Linear Motor Service
Linear operators are common on Davie’s HOA slide gates and residential driveway systems. We service and replace Linear motors, and we commonly retrofit newer Linear control boards onto older chassis to avoid full replacement where the mechanical drive is still sound. Board retrofit with labor in Davie typically runs $380 to $750, which beats paying $1,500+ for a full operator swap when the old one still has life.
Slide Motor Replacement
Slide motors on Davie HOA entrances take a beating from our storm season. Rack and pinion teeth strip, tracks bend, and motors keep running after the gate jams. Slide motor replacement in Davie runs $800 to $2,200 including new safety photocells and travel adjustments. We also add battery backup when a homeowner wants the gate to keep working through a summer thunderstorm outage.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Davie
We service nine major brands, but on Davie properties we see a lot of Linear, DoorKing, and Viking units on older HOA and ranch installations. We stock common control boards, safety beams, remotes, and loop-detector parts for these in our local truck stock, which means most Davie calls are one visit. If your operator is a Ghost Controls unit on a residential swing gate or a Viking on a horse-property entry, we’ll have the parts knowledge to get it right without guesswork.
Common Gate Motor & Opener Problems We See in Davie Homes
- Rusted-out hinge posts on 1960s-80s horse-property gates. The leaf sags and binds, overloading the operator until the control board fails. The fix starts with the post, not the motor. Deeper concrete footing, new hinges, then we address the operator load.
- Standing water from summer thunderstorms corroding underground wiring and loop detectors. Davie’s inland position means saturated soil sits against operator conduit longer than in coastal lots with salt-air breezes. That causes intermittent gate reversal or no-open faults that look like a bad motor but are actually a wiring problem.
- Hurricane-season wind damage on slide gates. Unsecured slide gates act like sails in tropical storm winds. Rack and pinion teeth strip or tracks bend, leaving the gate stuck mid-travel with the motor still running. We reinforce posts and add wind locks where code allows.
- Obsolete control boards on gates hung before modern safety standards. Many Davie ranch gates from the 1970s and 80s use boards that are no longer manufactured. We retrofit newer safety-compliant boards where the mechanical drive is still good, and we tell you when replacement is the cheaper long-term answer.
Pricing for Gate Motor & Opener in Davie, FL
We Also Serve Cities Near Davie
Our Gate Motor & Opener crew regularly works in Broadview Park, Cooper City, Pine Island Ridge, and Melrose Park. If you’re a few minutes outside Davie in one of those communities, the same same-day response and written pricing applies. Call and we’ll be straight about which days we’re in your area.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and offer Gate Installation in Davie, plus we know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Davie
My Davie horse-property pipe-rail swing gate is over 400 lbs per leaf-can a standard residential opener handle it?
No, it cannot. A double pipe-rail swing gate over 400 lbs per leaf needs a commercial-duty opener rated at 500+ lbs, which is what we baseline on every Davie ranch-parcel call. A residential opener on that gate will stall, overheat, and fail within months. We quote the right operator the first time, not the cheap one that burns out. Call (877) 610-2993 for a free measure and written price.
Why does my Davie gate operator fail more often than one in Fort Lauderdale?
Davie’s low-lying inland position means summer thunderstorms dump standing water that saturates the soil and stays there, corroding underground operator wiring and loop detector conduit faster than in coastal areas where salt-air breezes partially dry the ground. We see this pattern on every ranch road in Davie. The fix is better conduit sealing, riser-mounted connections, and battery backups that isolate the board from power surges. We’ll diagnose it in one visit.
My 1970s swing gate sags and the motor stalls-should I just replace the operator?
Usually not. The sag is in the hinge post, not the motor. We replace the rotted post, set it in deeper concrete, re-hang the gate, and the existing operator often works fine afterwards. When the post has been failing for years, the control board may have suffered damage, and we’ll tell you honestly whether a board retrofit or full replacement is the cheaper fix over time. Show me the gate closing on its own and I’ll show you where it’s failing.
Do I need entrapment protection on my old Davie ranch gate?
Yes. Most 1970s and 1980s gates in Davie predate current entrapment standards, which means no safety photocells, no reversing edges, and no force-sensing. We retrofit UL-compliant safety beams and reversing loops onto existing operators on every ranch gate we touch. It’s a safety matter, not an option. Installation runs $180 to $400 for photocells, and we won’t leave a gate that can crush a person or a horse.
Can I add battery backup to my existing LiftMaster slide gate in an HOA community?
Yes, and we do it often on Davie HOA slide gates. Battery backup installation on an existing LiftMaster or DoorKing unit runs $400 to $900, keeps the gate working through summer storm outages, and prevents the board from frying during lightning strikes. Some Davie HOAs now require it for emergency-vehicle access during power failures. We can inspect your operator, give you a written price, and schedule the work without any dispatch runaround. Call (877) 610-2993 and ask for Hal.
Contact Gatewood Fence & Gate in Davie
If your gate motor is making noise, stalling, or not responding at all, call (877) 610-2993 and you’ll get a live person on the line, any hour of the day or night. Free estimates, upfront pricing, and the price we quote is the price you pay. There’s a permanent 10% discount for seniors and veterans, $40 off any repair over $200, and a free second opinion on any written estimate you’ve already received. Hal Gatewood has been doing this since 2001 and his name is on every invoice. The shop is down the road, not three states away.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, offering Davie Gate Repair and serving the community since 2001.