Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Boerne
Gate motor and opener repair in Boerne usually means one of two things: a post has shifted in the shallow limestone soil and thrown the whole mechanism out of alignment, or the Texas sun and freeze cycles have cooked a circuit board or cracked a footing. A typical motor repair in Boerne runs $220-$480, and a full operator replacement with installation runs $850-$1,900 depending on gate weight, position, and whether we’re reusing your existing posts or resetting them. Hal Gatewood has been fixing gates since 2001, and he’s the person who shows up at your gate, not a rotating crew. Call (877) 610-2993 and you’ll get a live person, day or night.
We know Boerne gates the way you know your own driveway. The work here is different from San Antonio, where clay soil grips a post and holds it. Out here on the Edwards Plateau, a post anchored eight inches into caliche fails differently, and it fails faster after a hard freeze. That’s what we fix. Every job is quoted before we start, in writing, and it carries our 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is Boerne’s Preferred Gate Motor & Opener Company
Hal’s name is on the shop. His address is published. His license number is public record. That’s not a marketing slogan, it’s how an owner-operated gate company has to work in a town like Boerne, where you’ll run into your gate guy at the hardware store on Main Street or the H-E-B on Bandera Road. We’ve been locally owned and owner-operated since 2001, and the person who answers the phone at 2 a.m. is the same person who welds on site in your driveway and stands behind the work.
Homeowners around Boerne, Fair Oaks Ranch, and the acreage west of I-10 call us because we repair before we replace. A lot of companies will quote a full operator swap the moment a motor strains. Hal will tell you honestly if the board is fried and the motor itself is fine. That’s the repair-first philosophy, and it’s why Boerne customers keep our number saved. We carry a strong local reputation in the gated communities along Highway 46 and the ranch roads west of town, and we answer the phone around the clock. No voicemail, no call center. Dispatch and scheduling are coordinated from the brand’s San Antonio office, but the crews working Boerne gates live and work right here in the Hill Country.
Our Gate Motor & Opener Services in Boerne
Motor Installation
Boerne properties lean heavily toward large, ornamental iron swing gates on stone-and-brick homes or ranch-style pipe gates on acreage. That means installations here are rarely bolt-on jobs. We size the operator to the actual gate weight, check the post footings before we mount anything, and run the conduit and wiring clean. A full motor installation on a standard driveway gate in Boerne typically runs $850-$1,400, and on a heavy custom ornamental gate on caliche footings, plan for $1,400-$1,900 when post work is involved. You’ll get the price in writing before we start, and the 90-Day Done Right Promise after we finish.
Motor Repair
Most motor failures in Boerne trace back to the same root cause: a post that shifted after a freeze and forced the operator to work against a misaligned gate until the board or capacitor gave out. We’ll fix both, not just the symptom. Motor repair in Boerne typically runs $220-$480, including a full diagnosis, replacement of failed components, and re-sync of your remotes, keypad, and loops. If the job goes over $200, you get $40 off automatically. No haggling, no coupon code.
Linear Motor
Linear operators are common on the ranch-style pipe gates along FM 46, FM 1621, and the long caliche driveways west of town. They’re dependable units when they’re set right, but a linear motor mounted to a post that’s creeping out of plumb will tear itself up faster than you’d think. We service Linear motors regularly, stock common parts for them, and we’ll tell you straight if a repair makes more sense than a replacement. Linear motor repair in Boerne runs $240-$500 depending on the failure.
Slide Motor
Slide gates are rarer in Boerne than swing gates, mostly because the long, wide driveways here favor dual-swing setups. But when a property does have a cantilevered slide gate, it’s usually on a gated estate entrance, and it’s heavy. A slide motor that’s straining against a rack out of alignment will burn through boards and bearings. We service slide motors and slide openers on Boerne properties, and we always check the rack, the rollers, and the post alignment before we call a motor dead. Slide motor repair in Boerne typically runs $260-$550.
We also handle battery backup installation, intercom integration, and access control wiring. On Boerne’s larger lots, a gate that works only when the power is on is a gate that fails when the Hill Country weather knocks out your line for six hours. We can build in backup so your gate keeps working, and we’ll wire it so your existing intercom and keypad still talk to the new operator.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boerne
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. On Boerne jobs, we work most often on LiftMaster and FAAC operators on estate gates, and Linear motors on ranch-style pipe gates. We keep common boards, capacitors, remotes, and safety edges on hand so a repair doesn’t turn into a two-week wait for a part to ship. If you’ve got an older Viking or BFT unit that another company told you to replace, we’ll look at it before you spend the money, because half the time the board just needs a re-sync, not a burial.
Common Gate Motor & Opener Problems We See in Boerne Homes
- Gate posts heave out of alignment after Hill Country freezes. The February 2021 ice storm didn’t just crack pipes. It heaved posts set in shallow limestone soil, threw operators out of alignment, and cracked concrete footings poured directly against bedrock. The gate looks fine, but the motor is now working against a post that’s six degrees out of plumb, and it will burn itself out doing it.
- Circuit boards and rubber motor seals fail from direct sun and heat. Boerne summers routinely pass 100°F, and an operator box bolted to a steel post in full Texas sun can hit 140°F inside. Boards cook, capacitors swell, and rubber seals around the motor shaft dry out and crack. We see this on both exposed swing operators and surface-mounted slide operators.
- Heavy ornamental gates sag at the hinge post, not the panel. On cantilevered and oversized ornamental gates, the weight sits on the hinge post, and when that post’s footing is shallow caliche, the whole gate shifts. The rack and pinion go out of alignment, and the motor grinds. Fixing the panel without resetting or anchoring the post means you’ll fix it again in six months.
- Underground operators overheat on large-lot acreage. The underground operators used on estate gates west of Boerne sit in a steel vault that holds heat. After enough 100° days, the internal temperature kills the board and the seals, and the operator quits. Replacing it without improving drainage and airflow around the vault usually means replacing it again later.
Pricing for Gate Motor & Opener in Boerne, TX
Here are honest ranges for Boerne, because you should know the number before you call.
- Motor repair: $220-$480 (includes diagnosis, parts, re-sync)
- Linear motor repair: $240-$500
- Slide motor repair: $260-$550
- Full motor installation (standard swing gate): $850-$1,400
- Heavy ornamental gate installation with post anchors: $1,400-$1,900
- Battery backup installation: $350-$700
- Emergency after-hours service call (inside the county): no trip charge
These are the real ranges we quote on Boerne jobs, not a teaser number. What moves a job within the range is the gate’s weight, whether the post footings are sound, and whether we’re doing a straight swap or an alignment repair first. We give you the written price before any work starts, and that price doesn’t change at the door. Call (877) 610-2993 and we’ll talk through your gate over the phone and give you a free estimate. No trip charge inside the county.
We Also Serve Cities Near Boerne
Our repair crews work local in the Hill Country and the northwest edge of the San Antonio metro. If you’re in Gate Motor & Opener in Boerne, we’re already nearby, and we also cover Fair Oaks Ranch, Helotes, Timberwood Park, and Leon Valley. The same repair-first approach applies, the same written quote, the same 90-Day Done Right Promise.
Serving Boerne, TX - Our Local Coverage Area
We’re based in the Boerne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Boerne
Because the post moved, not the gate panel. The freeze heaved the post footing out of plumb in the shallow limestone soil, and the gate kept opening and closing while the hinges and operator fought the new angle. The motor worked harder every cycle until the board or capacitor failed. The gate looked fine because the damage was in the footing and the operator, not the visible panel. We check post plumb on every Boerne repair for exactly this reason. Call (877) 610-2993 and we’ll tell you if the post needs anchoring or if a simple board swap will fix it.
Yes, we install slide gate openers on caliche driveways throughout Boerne, including the acreage off FM 46 and FM 1621. The key on caliche is setting the track and the post footings so the slide rail doesn’t drift as the ground settles and bakes. We’ll core-drill and epoxy-anchor the posts where the ledge is too shallow for a standard footing. Slide opener installation with post work on a Boerne property typically runs $1,200-$2,200 depending on gate weight and rail length. Estimates are free.
Yes. We integrate LiftMaster and FAAC operators with existing intercom, keypad, and camera systems on gated Boerne properties all the time, including the larger estates around Cordillera Ranch and the gated communities off Highway 46. The operator has to talk to the entry system, not just turn the gate. We wire and program the handshake between the two, and we re-sync everything after a repair so the intercom still buzzes the gate and the camera still triggers. Call (877) 610-2993 for a free estimate on integration work.
Usually not at first. Scraping is a sag at the hinge post, not a motor failure. The motor becomes a problem when it keeps fighting the sagged gate and burns itself out. We see this on heavy ornamental iron gates in Boerne where the footing was poured against a limestone cap ledge only eight to twelve inches down. Our approach is to stop the sag at the post, re-level the gate, and then check the operator for strain damage. Fixing the motor without the post means fixing the motor twice.
Yes, we service underground operators on acreage lots west of Boerne, and we understand exactly how these units fail. The steel vault holds heat, the sun pushes it past the board’s limit, and the seals dry out. We replace boards, re-seal the motor housing, and improve the vault’s drainage and airflow so the next one lasts. On a Cordillera Ranch estate off Hwy 46, our techs found a custom ornamental iron swing gate sagging at the hinge post, not the panel, after the 2021 ice storm. The LiftMaster operator had overheated its circuit board from repeated strain against the shifted post. We core-drilled and epoxy-anchored the post footing, corrected the sag, replaced the board, and re-synced the intercom and keypad. The gate swings silently now. That’s the kind of repair we do in Boerne.
If your gate motor is straining, grinding, or dead, call (877) 610-2993. A live person answers, day or night. We’ll give you a straight answer, a written price, and the 90-Day Done Right Promise on every job. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Boerne since 2001.