Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Youngtown
Gate installation in Youngtown usually runs $1,400 to $4,800 depending on the gate type, and most jobs take one to three days once materials are ready. Youngtown presents a specific challenge most gate companies never see: homes built as the nation’s first planned retirement community, with original 1950s posts, 36-inch side-yard openings, and caliche-hardened soil that fights every new footing. We’ve been working these properties since 2001, and we know what a 60-year-old hinge post looks like from the inside. Call (877) 610-2993 for a free estimate and a straight answer.
Why Gatewood Fence & Gate Is Youngtown’s Preferred Gate Installation Company
Hal Gatewood set this company up to be the shop you can drive to and look someone in the eye. We’re locally owned and owner-operated, with a published address and license number anyone can verify. Hal’s name is on every invoice, and his cell number gets handed out freely. When we say we’ll show up in the window we promised, we mean it because our reputation in Youngtown depends on it.
Youngtown homeowners keep calling us back for one reason: we fix what’s fixable and replace what’s finished. A gate sags in the hinge post, not in the middle, and that’s where we start. Most companies want to sell you a whole new gate before they’ve checked the post. We’d rather reset the footing, re-hang the panel, and save you a thousand dollars. That philosophy has earned us a strong local reputation across Youngtown, and it’s why neighbors recommend us to neighbors.
Response time matters when your gate won’t open and your car is stuck in the driveway. We serve the 85363 area directly, and a live person answers the phone 24/7. No voicemail. No call center. Just a person who knows gates and can tell you when someone will be there.
Our Gate Installation Services in Youngtown
Every gate we install in Youngtown is measured, quoted, and agreed before any work starts. Here’s what most homeowners need, with the local context that changes the job:
Driveway Gate
Youngtown’s original mid-century plats left narrow side yards and short driveway approaches. That means many homes never had a vehicle gate, and adding one means cutting a new opening, running power, and setting new posts in soil that’s harder than it looks. We handle the whole job: post setting, gate fabrication, operator installation, and safety photocells set at the right height for the code. A basic steel driveway gate with a manual latch in Youngtown starts around $1,400; add an automatic opener and you’re looking at $3,000 to $4,800 depending on width and operator brand.
Pedestrian Gate
This is the most common job in Youngtown because the original 36-inch walk gates were sized for foot traffic in 1954, not mobility scooters or golf carts in 2025. We regularly widen these openings to 42 or 48 inches, reset the hinge and latch posts in concrete, and hang a new swing gate that a scooter clears without scraping. A basic pedestrian gate replacement runs $600 to $1,200. A widened opening with new posts and a motorized operator runs $2,200 to $3,800.
Sliding Gate
Sliding gates make sense when you don’t have room for a gate to swing inward or outward, which is common on Youngtown lots where the house sits close to the property line. We install cantilever and rolling-track sliders, and we pay close attention to the track. Summer heat in Youngtown routinely exceeds 110°F, and a steel rack expands enough to bind on the drive gear if it wasn’t gapped for thermal movement. We gap it right the first time. Sliding gate installation in Youngtown typically runs $2,800 to $5,500 depending on length and whether we’re running new low-voltage power or tying into existing conduit.
Swing Gate
Single and double swing gates are the workhorse of older Youngtown properties, and the challenge is always the posts. Sixty-year-old footings in Maricopa County clay have heaved and tilted. You can’t hang a new swing gate on a post that’s leaning even an inch without fighting the hinges forever. We dig out the old footing, reset the post plumb in new concrete, and only then hang the gate. Single swing gate installation with a new post set starts at $1,800. A double gate with an operator and keypad runs $3,500 to $6,200.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Youngtown
We’re certified to service and install gate operators from Viking, Ghost Controls, DoorKing, Elite, and five other major brands. For Youngtown customers that means we stock the common parts locally and don’t have to order a control board from out of state while your gate sits stuck. If you have an existing Viking or DoorKing operator and the gate itself has failed, we can often keep the operator and re-hang or rebuild the gate around it, saving you real money. Our Gate Installation team stocks limit switches, photocells, remotes, and keypads for all the brands above, so a repair doesn’t turn into a two-week wait.
Common Gate Installation Problems We See in Youngtown Homes
- Rusted-through bottom rails from irrigation overspray. Youngtown’s hard water leaves mineral deposits on any metal near a sprinkler, and after 60 years, the bottom rail of an original Eisenhower-era iron gate is often rusted through. The gate drops on the latch side and scrapes the ground. Fix the panel without checking the post and you’ll fix it twice.
- Heaved 1950s post footings from seasonal clay movement. Maricopa County’s expansive clay swells when it rains and shrinks when it dries. Original post footings from the 1950s weren’t poured deep enough or wide enough for today’s operators, and the posts drift. A leaning post throws the safety photocells out of alignment and leaves the gate dead.
- Afternoon thermal binding on sliding gates. Over 110°F, a steel gate frame grows longer and the rack teeth change pitch slightly. If the installer didn’t leave thermal clearance, the gate binds on the drive gear every afternoon and works fine at night. We see this constantly in August, and the fix is a re-gap and sometimes a new rack.
- Monsoon dust killing opener gear tracks. Haboobs push fine caliche dust into every groove, hinge, and gear track. By late August, Youngtown openers start failing because the dust has turned to paste inside the track. We pull the covers, clean the gears, and seal the housings better than the factory did.
Pricing for Gate Installation in Youngtown, AZ
A pedestrian gate replacement in Youngtown runs $600 to $1,200. A new swing gate with post reset starts at $1,800. A sliding driveway gate with an automatic opener typically lands between $2,800 and $5,500. A full double driveway gate with operator, keypad, and battery backup runs $3,500 to $6,200. The big variables are post condition, opening width, soil hardness, and whether we’re running new power or tying into existing conduit.
Every quote is written down and agreed before any work starts. The price you approve is the price you pay. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a real number, not a guess.
We Also Serve Cities Near Youngtown
We work throughout the west Valley and regularly install gates in El Mirage, Sun City, Peoria, and Surprise. If you’re a few miles away, the trip charge stays zero inside Maricopa County, and the quote still comes in writing before any work begins.
Serving Youngtown, AZ - Our Local Coverage Area
We’re based in the Youngtown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Youngtown
Yes, in most cases. We remove the existing gate and one hinge or latch post, reset the post farther back or forward as needed, and hang a new 42- or 48-inch swing gate. The fence panels beside it stay untouched. Youngtown’s original 36-inch openings were sized for walking, and we’ve widened dozens of them for scooters and golf carts. The work usually runs $2,200 to $3,800 including a new post, gate, and operator if you want one. Call (877) 610-2993 for a free measure and exact quote.
Not if it has battery backup. We install battery backup on every automatic gate in Youngtown, and we recommend it even on gates without an operator, because a summer monsoon can knock out power for hours and nobody wants to be trapped behind their own gate when it’s 108°F outside. The battery keeps the operator running through short outages and lets you open the gate manually with a key release during longer ones. It’s a small addition, typically $300 to $500, and it’s worth every dollar in July.
Usually just a post fix. We dig out the old footing, reset the post plumb in fresh concrete, and re-hang the existing gate. If the gate panel itself is rusted through or bowed beyond straightening, we’ll tell you straight and quote a replacement panel only, not a whole new system. Post resets in Youngtown run $400 to $900 depending on soil and depth. Show me the gate closing on its own and I’ll show you where it’s failing, and most of the time it’s the post, not the panel.
Thermal expansion. A steel gate frame and rack grow measurably longer above 100°F, and if the installer didn’t leave proper clearance on the drive gear, the teeth bind when everything expands. It works in the morning because the metal contracts overnight. The fix is re-gapping the rack and sometimes replacing a bent drive gear. We see this failure every August in Youngtown, and we gap every sliding gate we install to handle 110°F afternoons without binding.
If it doesn’t have working safety photocells, no. An automatic gate without functioning safety sensors will close on a child in its path, and that’s not a risk any grandparent should take. We install new photocells, edge sensors, and pressure-reverse settings on every motorized gate we touch in Youngtown. The equipment runs $200 to $600 depending on brand, and the install is usually same-day once we’re on site. Call (877) 610-2993 and we’ll check yours before you have to worry about it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Youngtown since 2001.