Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Wrentham
A new driveway gate installation in Wrentham, MA typically runs $5,800 to $14,200 for ornamental iron or aluminum on new footings, while a pedestrian gate runs $2,100 to $4,800. Most installations take one to two days on site once materials are ordered and the footings are poured. If you live in Wrentham, you’re dealing with a 48-inch frost line, older housing stock, and driveways that don’t always give a gate installer much room to work. We know this town’s soil, its gate history, and what’s actually worth fixing versus replacing. Call (877) 610-2993 and Hal Gatewood will talk through your property before anyone sets foot on it.
Why Gatewood Fence & Gate Is Wrentham’s Preferred Gate Installation Company
Hal Gatewood has been at this since 2001, and the gate business in Wrentham has a specific shape to it. The town’s 1990s and early 2000s building boom put a lot of ornamental iron and vinyl driveway gates onto long private driveways off Route 1A, South Street, and the side roads running up toward the Wrentham State Forest. Those gates are now 20 to 30 years old. The opener’s control board is obsolete. The post footings were poured at 36 inches, not the 48 inches Wrentham’s frost line demands. The hinges have been carrying a gate that’s been out of plumb for five winters. That’s the work we walk into most weeks in 02093.
We’re not a franchise and we don’t run a call center. Hal’s name is on the shop, the address is published, and the person who answers the phone at 2 a.m. is a person, not a menu. When a Wrentham homeowner calls about a gate that won’t close, they get a straight answer about whether it’s a board, a hinge, or a footing, and a real price before any work starts. The quote you get is the price you pay. That’s not a promotion. That’s how Hal has done it for 29 years, owner-operated the whole time.
Our Gate Installation Services in Wrentham
Driveway Gate Installation
Wrentham’s larger lots, particularly the colonials and capes built off Taunton Street and in the subdivisions around Lake Pearl, mean driveway gates are often set well back from the road, at the top of a long gravel or paved run. We install new Gate Installation systems to match the setback and the grade, not a one-size kit. That includes running conduit and power where none exists, setting posts below the Wrentham frost line, and sizing the operator to the panel’s weight, not to the manufacturer’s optimistic spec sheet. A full driveway gate install in Wrentham runs $5,800 to $14,200, with ornamental iron at the higher end and aluminum or vinyl lower.
Pedestrian Gate Installation
Lots of Wrentham properties have a driveway gate and a separate pedestrian gate next to it, usually hung from a brick or fieldstone pillar. These gates see daily use and fail first at the hinge welds and the latch alignment. We weld on site so a bent hinge leaf doesn’t become a reason to replace the whole gate. New pedestrian gate installation around Wrentham runs $2,100 to $4,800 depending on width, material, and whether we’re setting new posts or working with existing pillars.
Sliding Gate Installation
Wrentham has dozens of slide gates on properties where the driveway slopes up from the road or there isn’t enough swing clearance past the fence line. A slide gate lives or dies on its bottom rollers, and in Wrentham those rollers grind through mud-season grit every March and April. We install new slide gates with sealed bearing rollers and set the track on a poured bed that drains, so the thing isn’t swimming in meltwater every spring. A new slide gate in Wrentham runs $6,200 to $13,500, including operator and safety sensors.
Swing Gate Installation
Swing gates are everywhere in Wrentham, especially the double ornamental iron gates on the newer subdivisions and the wooden farm-style gates on older agricultural properties. The install matters more than the gate itself. Posts must go below the 48-inch frost line with gravel sumps at the base, or the whole gate heaves out of alignment within a few winters. We set posts to 54 inches minimum in Wrentham, because 36 inches works in Foxborough or Franklin but not here. New single swing gates run $4,500 to $9,800, doubles $8,000 to $15,000, wood on the lower end and iron higher.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wrentham
We’re certified to service and install nine major gate brands, including FAAC, BFT, Linear, and Viking. For Wrentham homeowners, that means we can usually pair a new opener with your existing gate panels instead of forcing a full replacement when the old LiftMaster or DoorKing finally dies. We keep common BFT and Viking control boards and safety sensors in stock, so a retrofit on a Wrentham swing gate doesn’t wait on a three-week parts shipment. And if you’re replacing a 1990s operator that lacks modern UL 325 entrapment protection, we’ll quote you the retrofit honestly, including when a new operator costs less than patching an obsolete board.
Common Gate Installation Problems We See in Wrentham Homes
- Frost-heaved posts on 36-inch footings. Wrentham’s frost line reaches 48 inches. Post footings poured shallower, which we see constantly on 1990s and early 2000s gate installs, heave out of plumb within a few winters. The gate stops latching, or the operator binds and burns out its limit switches.
- Obsolete 1990s control boards without UL 325 protection. A lot of Wrentham gates were installed before modern entrapment safety standards existed. The operator runs, but it won’t reverse on obstruction, which is a serious safety issue for anyone who has kids or livestock near the gate.
- Bottom rollers ground down by mud-season grit. Wrentham’s unpaved and gravel private driveways produce a spring slop that works into slide gate rollers and hinge pins. We see older slide gates where the roller bearings have ground to dust and the gate is dragging on the track frame.
- Double gates with one good post and one gone. The classic Wrentham setup is a double iron gate where one hinge post has rotted or heaved and the other hasn’t. The gate sags in the middle, the lock bars don’t line up, and the operator fights the imbalance every cycle until something breaks.
Pricing for Gate Installation in Wrentham, MA
Here’s what new gate installation actually costs in Wrentham in 2026:
- Pedestrian gate installed: $2,100-$4,800
- Single swing driveway gate installed (wood): $4,500-$7,200
- Single swing driveway gate installed (ornamental iron or aluminum): $5,800-$9,800
- Double swing gate installed (iron): $8,000-$15,000
- Sliding driveway gate installed: $6,200-$13,500
- Post replacement with 54-inch footings (per post): $700-$1,400
These ranges include materials, footings, operator, and safety sensors. What moves the number is the post work, whether we’re running power to a gate that never had it, and whether the old panels are worth keeping. You’ll get a written price before any work starts, and that price doesn’t change at the door. We offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. The estimate is free. Call (877) 610-2993.
We Also Serve Cities Near Wrentham
Most of our gate work in this corner of Norfolk County comes from Wrentham, but we’re regularly in Norfolk, Foxborough, Walpole, and Millis for the same freeze-thaw post problems and aging 1990s operators. If you’re just outside town and need Gate Installation in Wrentham or nearby, call us. We’ll tell you straight what’s feasible on your property.
The Frost Line Problem Wrentham Homeowners Don’t Know They Have
Here’s the thing most gate installers who work the whole Boston metro don’t mention: Wrentham’s frost line reaches 48 inches. That’s deeper than a lot of the region. In neighboring towns like Foxborough or Franklin, a 36-inch footing usually holds, because the frost doesn’t penetrate as far on many sites. But Wrentham sits inland enough, with the right mix of high-clay soils and exposed north-facing slopes, that 36 inches fails. We see it every spring: gate posts heaved three inches out of plumb, gates that no longer latch, operators that burned out their limit switches fighting a misaligned gate all winter. Any replacement installation in Wrentham needs concrete poured to at least 54 inches with a gravel sump at the base for drainage. If the post is set right, the gate and operator last decades. If not, you’re redoing this in three years. We set posts in Wrentham to 54 inches because that’s what this town’s soil demands. It costs a little more in concrete and digging. It costs a lot less than doing the job twice.
The Taunton Street Double Gate
Last spring our crew reset a double ornamental iron swing gate on Taunton Street where both hinge posts had heaved three inches out of plumb. The original LiftMaster operator had worn its limit switches fighting the misalignment, and the 1990s control board lacked current UL 325 entrapment protection. We poured new 54-inch footings with gravel sumps, replaced the rotten wooden post cores with galvanized steel, and installed a Viking operator with monitored safety photocells. The gate now swings true and passes a reverse-on-obstruction test. The homeowner kept the original iron panels, which were in good shape. He didn’t need a new gate. He needed new posts and a safe operator. That’s the distinction we make every day in Wrentham, and it’s the difference between a $2,900 retrofit and a $12,000 replacement he didn’t need.
Serving Wrentham, MA - Our Local Coverage Area
We’re based in the Wrentham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Wrentham
In most cases we can retrofit the gate with monitored safety photocells and a new control board without replacing the entire operator, as long as the motor and gearbox are still sound. What usually forces a full operator replacement is a control board that predates UL 325 entrapment protection and can’t accept modern inputs. We’ll tell you which one you have, and the retrofit on a Wrentham swing gate typically runs $900 to $2,200 versus $2,400 to $4,500 for a new operator installed. Call (877) 610-2993 and Hal will give you a straight answer.
Because it was poured above Wrentham’s 48-inch frost line, almost always at 36 inches. Water in the soil freezes and expands, and the footing heaves upward unevenly. The fix is a new footing poured to at least 54 inches with a gravel drainage sump at the base. It’s the standard we use on every Wrentham post replacement, and it’s why our posts stay plumb through winters that push shallow ones out of the ground.
Yes, and often that’s exactly what we recommend. The iron panels on a 1990s Wrentham gate are usually solid; it’s the posts, hinges, and the electronics that fail. We weld on site, so we can reinforce hinge mounts and repair the existing panels rather than hauling them to a shop. You’ll get an honest recommendation on what’s worth keeping and what isn’t, before you spend a dollar.
Usually just new rollers, but it depends on how long the gate has been dragging. Wrentham’s mud season pushes grit into the roller bearings, and once a roller seizes, the gate grinds metal on metal. If we catch it before the track frame is deformed, replacing the rollers and greasing the bearings resolves it. If the track is worn thin or bowed, we’ll tell you that too. Either way, the diagnosis is free and the price is fixed before we start.
Yes, and this is common on Wrentham’s larger rural lots, especially along South Street and the old farm properties where the gate is 300 feet from the house. We install solar-capable operators from FAAC, BFT, and Viking with deep-cycle batteries sized to the gate’s daily cycles and Wrentham’s winter sun angle. The system needs a properly sized panel and battery bank, not a trickle charger, or you’ll be calling us every February when the gate won’t move after three cloudy days. Expect $1,800 to $3,600 for the solar power system on top of the gate and operator install.
Call Gatewood Fence & Gate for Your Wrentham Gate Installation
If you have a gate in Wrentham that’s done its time, call (877) 610-2993. Hal Gatewood will answer, talk through what you have, and give you an honest read on what’s worth fixing and what isn’t. The name’s on the shop and the shop is down the road. That’s the oldest accountability there is. Free estimates, written pricing before any work starts, and a 90-Day Done Right Promise stamped on every job. If it’s not done right, call and Hal comes back. No runaround.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wrentham since 2001.