Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Woodstock
Gate installation in Woodstock, GA typically runs $2,400-$7,500 for a single driveway gate and $4,800-$18,000 for an HOA community entrance, with most jobs taking 2-4 weeks from measure to final swing test. The biggest variable isn’t the gate itself. It’s whether your subdivision’s architectural committee approves the design before we ever dig a post hole. We’re Gatewood Fence & Gate, and we’ve been installing driveway, swing, slide, and security gates in Cherokee County long enough to know which Towne Lake HOA wants black powder-coat, which wants bronze, and which one will kick back a submittal for the wrong picket spacing. Call (877) 610-2993 and Hal will walk you through what’s actually involved before anyone shows up with a post-hole digger.
Why Gatewood Fence & Gate Is Woodstock’s Preferred Gate Installation Company
Hal Gatewood has been at this since 2001, and his name is on the shop. That’s not a slogan. It means when you call about a gate in Woodstock, the person who answers is the same person who’s going to stand in your driveway and look at the post footings. We’re not a dispatch board routing a call to whoever’s closest that day. We answer around the clock, and for Woodstock customers, the person who picks up knows the difference between a Towne Lake slide-gate rack and a single-family swing hinge without checking a manual.
Every gate we install in Woodstock carries our 90-Day Done Right Promise in writing. If the gate binds, sags, or the operator doesn’t perform the way we said it would, one call brings Hal back. No runaround. We also weld on site, which matters a lot here: when an HOA entrance gate needs a hinge reinforcement or a custom bracket to adapt an old rack to a new operator, we do it right there in the community lot instead of hauling the gate across town and leaving the entrance unsecured for a week.
We’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment. For Woodstock, that matters because many Towne Lake communities run older LiftMaster or Eagle slide-gate units that out-of-area crews don’t stock parts for. We do.
Our Gate Installation Services in Woodstock
Our Gate Installation team handles everything from a 4-foot pedestrian gate off a kitchen patio to a 24-foot slide gate at a 90-home subdivision entrance. Here’s what we do most around Woodstock.
Driveway Gate
A private driveway gate in Woodstock is usually a swing gate on powder-coated steel or aluminum, sized anywhere from 10 to 16 feet depending on your cut width. Most of the driveway gates we install in 30188 and 30189 are single-arm swing operators, unless the driveway slopes hard enough that a slide gate makes more sense. We measure the setback from the road to the post, check the existing fence line, and write the quote before any work starts. The price on the quote is the price you pay.
Pedestrian Gate
A pedestrian gate sounds simple, but in Woodstock’s subdivisions it usually has to match the HOA’s existing fence style exactly. Same picket profile, same top rail detail, same latch. We do a lot of these alongside community fence projects and private driveway installs. A standard 4-foot pedestrian gate with a matching latch and hinge set runs $900-$2,400 installed, depending on whether it’s aluminum or steel and whether it needs a maglock tied to an existing access system.
Sliding Gate
Sliding gates are the workhorse of Woodstock’s older Towne Lake communities. These are the gates you see at community entrances on Towne Lake Parkway, Holly Street, and up and down the connector roads off Bells Ferry. What people don’t realize is that a slide gate from 2005 wasn’t built to accommodate a 2026 operator. The rack and pinion pitch changed on several manufacturers. We handle that adaptation, often keeping the existing gate panel and post footings and swapping only what actually needs swapping. That’s the repair-first approach Hal’s built his reputation on for 29 years.
Swing Gate
Swing gates are the most common choice for single-family driveways in Woodstock because most lots in the 2000s-era master-planned subdivisions were graded with a gentle slope that suits them. The failure we see most in Cherokee County is post heave: the red clay underneath saturates during spring and summer rain, expands, and shifts the post. A gate that swung true in March binds by June. We set posts deeper than minimum code and use concrete collars sized for our soil, not a generic spec from a flat-lot county in Florida.
Security Gate
Security gates in Woodstock usually mean one of two things: a heavier steel gate with a maglock and keypad at a private drive, or a HOA community entrance with vehicle detection loops, a card reader, and a call box. Both need proper UL 325 compliance on the safety edges and photocells, and both need a power run that a lot of “fence guys” won’t touch. We handle the full install including the electrical, the loops, and the access programming.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Woodstock
For Woodstock customers, brand support isn’t a brochure bullet. It’s the difference between a gate that’s down for two days and a gate that’s down for two weeks while someone orders a part from a warehouse in Ohio. We hold local inventory for FAAC, BFT, Linear, and Viking operators, including the hardened gear sets and control boards that fail most in Cherokee County’s humidity and winter ice cycles. If your community’s gate runs an older LiftMaster or Eagle unit, we can usually cross-reference the replacement without tearing out the existing rack.
Common Gate Installation Problems We See in Woodstock Homes
- HOA architectural rejections. The single most common delay in Woodstock isn’t a bad gate. It’s a submittal that didn’t match the community’s original style guide. We flag this before ordering steel, not after the gate arrives.
- Red clay post heave. Cherokee County’s clay soil expands when it rains and contracts when it dries. A post set at a standard 36-inch depth in wet clay will move within one season. We go deeper and use a larger footing than the generic spec.
- Discontinued slide-gate operators. The Towne Lake corridor built out between 2002 and 2008. A lot of those original operators are now obsolete. We adapt the new unit to the old rack geometry, or fabricate a rack adapter on site.
- Shared access system integration. HOA entrances in Woodstock don’t just need a gate that opens. They need the new operator to talk to the existing loop detectors, the call box, and the resident card reader. If the new install breaks the resident access, the community is down until it’s fixed. We test all of it before we leave.
Pricing for Gate Installation in Woodstock, GA
Let’s talk real numbers for Woodstock’s market. A single driveway swing gate, including the operator, keypad, and installation, runs $2,400-$5,800. A pedestrian gate alone is $900-$2,400. A slide gate for a driveway runs $4,200-$7,500 depending on the track, the operator, and how much site prep the post footings need. HOA community entrances are a different animal: $4,800-$18,000, driven by gate length, access system scope, and whether we’re adapting to an existing rack or installing new.
What changes the price? Gate width, whether it’s swing or slide, steel versus aluminum, whether the driveway has a grade that needs a specialty track, and whether the HOA requires a particular finish. The quote we give you is the price. It’s agreed before we start, and it’s in writing. We offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll measure it for free.
We Also Serve Cities Near Woodstock
If you’re in Holly Springs, Acworth, Kennesaw, or Canton, we’ll come to you too. These communities share the same clay soil, the same aging HOA gate infrastructure, and the same county permit process we already know from Woodstock. The drive is short, and the same crew that installs your gate is the crew that stands behind it for 90 days.
Serving Woodstock, GA - Our Local Coverage Area
We’re based in the Woodstock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Woodstock
Yes. If you live in a Woodstock subdivision with a recorded HOA covenant, you need written architectural committee approval before any new gate, post, or operator goes in. The committee reviews style, height, finish, and sometimes even the operator model. We help prepare the submittal and include the drawings and specs the committees ask for. Call (877) 610-2993 if you want us to check what your specific community requires before you spend anything.
Yes. We’ve matched the rail profiles, picket spacing, and powder-coat finishes of the original Towne Lake entrance gates for years. Most of these communities use a brushed aluminum or black powder-coated steel profile with a specific top rail cap. We take a photo of the existing gate, match it, and build the new one to look like it was always there. Call (877) 610-2993 and we’ll walk the site with you.
We install the gate and the access system together: vehicle detection loops, card readers, call boxes, safety photocells, and the operator. Then we test the full resident access flow before we leave, including the fire department override if the community has one. If the existing loop wiring is still good, we reuse it. If it’s not, we pull new wire. No community gets left with a gate that opens for the property manager but not the residents.
For most Woodstock driveways, a swing gate with deeper-than-standard post footings is the right call. The red clay here expands and contracts enough to shift a shallow-set post within one wet spring, so we over-excavate the footing and pour a collar that resists heave. If your driveway has a steep grade or limited swing clearance, a slide gate with a properly bedded steel track is the better choice. Call (877) 610-2993 and we’ll tell you which fits after we measure the site.
Yes. We work with the HOA board or the management company directly throughout the job: submitting the design for approval, scheduling the install around resident traffic, and handling the final walkthrough. For planned communities in 30189 especially, the management company usually wants one point of contact from start to finish. That’s what we do. Call (877) 610-2993 and we’ll get the submittal started.
Most single-family driveway gates in Woodstock go from free measure to final walkthrough in 2-3 weeks. HOA community entrances run 3-6 weeks depending on the architectural approval timeline and the scope of the access system. We’ll give you a written schedule with the quote so you know exactly which weeks we’re on site, and the phone number to reach Hal if anything changes.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Woodstock, GA since 2001.