Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Wichita
Gate installation in Wichita typically runs $1,100 to $4,800 for a standard driveway gate, depending on material, size, and whether you’re adding an operator. Most projects we quote are finished within three to seven days once materials arrive. Hal Gatewood has been putting gates in the ground around Wichita since 2001, and he’ll tell you the same thing he tells every homeowner: the wind and the clay here do not forgive shortcuts. Call (877) 610-2993 and talk to a live person, any hour. You’ll get an honest answer about what your Wichita Gate Access Control needs and what it doesn’t.
Key Takeaways:
- Wichita’s wind and shrink-swell clay demand deeper footings and heavier hardware than standard installs
- Fixing a post before it fails costs a fraction of replacing a dropped gate
- We quote a price before work starts, in writing, and honor it
- Every job carries the 90-Day Done Right Promise
Why Gatewood Fence & Gate Is Wichita’s Preferred Gate Installation Company
Wichita homeowners keep our number for the same reason they keep their neighbor’s: Hal answers the phone himself most days, and when he doesn’t, one of his crew does. There’s no voicemail maze. The shop’s address is published, the license number is real, and if you want to look the man in the eye before signing anything, you can drive to the shop and do exactly that. That’s how business gets done around Wichita.
We’ve pulled more gates back into square that other companies wanted to haul off and replace. That’s the Gate Repair - Wichita philosophy that’s kept our name on the shop for over two decades. When a 1990s operator board fails after a spring storm, we don’t automatically sell you a whole new setup. We’ll tell you honestly if a retrofit kit gets you another ten years for a third of the price. The 90-Day Done Right Promise is stamped on every invoice, not buried in fine print. One call brings Hal back, no runaround.
Calls from Gate Installation in Wichita homeowners are answered by a live person around the clock. If your gate won’t open at 6 a.m. on a Tuesday, you’ll get Hal or someone from the crew, not a recorded greeting. Background-checked, uniformed people show up in the window we promised. That’s the whole point of hiring a local shop.
Our Gate Installation Services in Wichita
We install every type of gate that works in this climate, and we’ll steer you away from the ones that won’t. Here’s what Gate Installation out of our Wichita office covers most often.
Driveway Gate Installation
A new driveway gate in Wichita usually runs $1,400 to $4,000 without an operator. The spread depends on whether you want a single swing gate for a standard two-car driveway or a double swing for a wider opening. We size the hinge posts for Wichita’s wind load, not a national average. A gate that flutters in a 30 mph gust will crack welds within two years. We set posts deep and hang the gate so it doesn’t fight the frame, and our Gate Parts & Welding - Wichita team can fix it if it does.
Pedestrian Gate Installation
Pedestrian gates start around $450 for a basic steel or cedar gate with new posts set in concrete. The west-side ranch neighborhoods off 13th and 21st Street North have hundreds of original wood pedestrian gates that have rotted out at the post base. We’ll usually suggest steel posts even if the gate panel stays wood. It’s the post that fails in Wichita, not the panel.
Sliding Gate Installation
Sliding gates are the smart choice for driveways with a slope or a tight setback. In Wichita, they also happen to handle wind better than a wide swing gate because the load transfers to a track and rollers instead of a hinge post. Expect $1,800 to $5,500 installed, depending on steel versus aluminum and whether you add an operator. We run the track on a concrete header so the freeze-thaw cycle doesn’t wreck the alignment by February.
Swing Gate Installation
Swing gates dominate Wichita’s east side, especially in gated subdivisions around 67206 and 67208 where ornamental iron and automated single-swing gates went in during the 1990s. A new steel or aluminum swing gate with a Wichita Liftmaster service or Ghost Controls operator typically lands between $1,600 and $4,200. If the old gate was hung on wooden posts, we pull those and set steel. Wood posts have a finite life in Wichita’s clay and no amount of bracing changes that.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wichita
Hal is certified on Gatewood Fence & Gate’s service list: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Three of those matter most for residential Wichita installs. Viking and Ghost Controls make the swing operators we trust on windy lots, and DoorKing still builds the slide operators we spec for heavier steel and aluminum gates. If you already have one of those brands, we can work on it. If you don’t, we’ll recommend the one that makes sense for your gate and your budget. We stock common boards and photo-eyes locally so a down operator doesn’t mean two weeks of waiting on a parts truck.
Common Gate Installation Problems We See in Wichita Homes
- Leaning hinge posts from clay heave. Wichita’s shrink-swell clay saturates in wet springs and contracts in dry summers. Posts set shallow get worked loose season after season until the gate drags on the latch side.
- Wind-fatigued welds on ornamental iron. That constant 20 mph breeze is a load cycle. Every gust flexes the hinge joint. After enough cycles, the weld cracks at the post and the gate sags suddenly.
- Fried control boards after spring storms. The April and May hail season brings power surges. A 1990s operator board often can’t take it, and many of those boards are no longer manufactured.
- Rotted wood posts at ground level. The older ranch homes west and north of downtown still have original cedar posts that sat in wet clay for fifty years. The post gives out before the gate does.
Pricing for Gate Installation in Wichita, KS
A typical gate installation in Wichita runs $1,100 to $4,800. Here’s the breakdown by common scope:
| Service | Wichita Price Range |
|---|---|
| Pedestrian gate (steel or cedar, new posts) | $450 - $1,100 |
| Single swing driveway gate (no operator) | $1,400 - $2,800 |
| Double swing driveway gate | $2,200 - $4,800 |
| Sliding gate with track and header | $1,800 - $5,500 |
| Operator installation (swing or slide) | $900 - $2,400 |
What moves the price: gate weight and width, whether we’re pulling rotted wood posts, and operator brand. You’ll get a written quote before any work starts. No trip charge inside the county. Seniors and veterans get 10% off, permanently. Any repair over $200 takes $40 off. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Wichita
Our Wichita office schedules work throughout the surrounding county. You’ll see our trucks in Park City, Haysville, Derby, and Andover most weeks. Same pricing, same 90-Day Done Right Promise. If you’re within a short drive of Wichita, we’ll come out and measure for free.
Serving Wichita, KS - Our Local Coverage Area
We’re based in the Wichita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Wichita
That’s the clay soil doing exactly what Wichita’s clay does. Wet springs make the soil expand and heave posts upward and outward. Dry summers make it contract and settle. A gate that latched in April has shifted by August because the post moved, not the gate. The fix is setting steel posts in concrete footings below the frost line, which stops the seasonal movement at the source. Call (877) 610-2993 and we’ll come look at your posts before you spend money on hinges.
It depends on the board and the brand. If we can still get a retrofit board with monitored photo-eye inputs and force-sensing, retrofitting is usually $500 to $900 versus $1,200 to $2,400 for a full operator replacement. We’ll tell you straight which is the better money. If your board is obsolete and no retrofit exists, replacement is the only honest answer.
A sliding gate on a concrete track or a steel-framed swing gate with steel hinge posts and adjustable hinges. Aluminum frame panels handle wind fine if the post and hinge are strong enough. The wind kills gates at the post connection and the hinge weld, not in the panel itself. We oversize both for Wichita’s load.
For a standard driveway gate, we set steel posts 42 inches deep in concrete. Wichita’s frost line is shallower than that, but the real reason is the clay. A 42-inch footing gets below the worst of the seasonal shrink-swell cycle and anchors the post in stable soil. Shallow footings set at 24 inches will move within two years. That’s not an opinion. We’ve pulled too many of them out.
Usually no. A leaning post after a storm usually means the wood or concrete below grade has already failed. Straightening it without replacing the footing buys you weeks, not years. We’ll pour new footings and set the posts square. The gate is the same gate. The foundation is the fix.
Need a gate installed in Wichita? Call (877) 610-2993. You’ll talk to a person, get a straight answer, and a written price before any work starts. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Wichita since 2001.