Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Waxhaw
Gate installation in Waxhaw, NC typically runs $2,800 to $9,500 for a full driveway gate with operator, and we quote every job up front before any work starts. Waxhaw’s newer HOA communities demand precise finish matching and proper footing work in Union County red clay, which is exactly what Gate Installation crews like ours handle every week. If you’re in Waxhaw and need a swing gate, sliding gate, or security gate done right the first time, call (877) 610-2993 and a live person answers.
Hal Gatewood has been running Gatewood Fence & Gate since 2001, and his name is on the shop and on every invoice. We’re not a franchise rolling through town. We show up in Waxhaw, do the job in your driveway, and if something’s not right, the 90-Day Done Right Promise brings us back. No runaround.
Why Gatewood Fence & Gate Is Waxhaw’s Preferred Gate Installation Company
Waxhaw homeowners call us because they’ve already been quoted one number on the phone and handed another at the door by some outfit with a call center three states away. That doesn’t happen here. The price Hal quotes is the price you pay, and it’s in writing before the first post hole gets dug.
We work across Waxhaw’s HOA-governed subdivisions constantly, from Millbridge to Kensington, so we know what architectural review boards expect. When a community requires a specific bronze or matte black finish on visible hardware, we document it in the estimate. When a board needs written approval before replacement work, we build that wait into the schedule instead of letting it ambush you. That’s local knowledge you don’t get from a national brand.
Every call to (877) 610-2993 is answered by a person, 24 hours a day. Not a voicemail. Not a chatbot. If you’re in Waxhaw and your gate is stuck open at 10 p.m., you’ll talk to someone who can actually help.
And the 90-Day Done Right Promise is stamped on every job. If it’s not done right, we make it right. One call brings Hal back, no argument.
Our Gate Installation Services in Waxhaw
Driveway Gate Installation
A new driveway gate in Waxhaw’s master-planned subdivisions usually means matching the HOA’s specified style, whether that’s decorative wrought iron or powder-coated aluminum. Half-acre-plus lots are common here, so we’re often running longer low-voltage conduit runs for keypads and vehicle loop detectors from the house to the gate. We quote the full scope up front, including the electrical work, so there’s no surprise trenching bill after the fact.
Pedestrian Gate Installation
Pedestrian gates in Waxhaw usually flank the driveway on brick or stone columns, and they need to open and close thousands of times without dragging. We set the hinge post in an over-excavated footing so Union County’s red clay doesn’t heave it out of alignment within a year. A mismatched finish will get flagged by the HOA, so we match the existing hardware before we order anything.
Sliding Gate Installation
Sliding gates work well on Waxhaw lots where the driveway slopes or where swing clearance is tight against landscaping. The gate rides on a track set into concrete, and if that track’s not dead level, the gate fights the motor every cycle and burns out the operator early. We also install the vehicle loop detectors that keep the gate from closing on a car that’s still sitting in the path.
Swing Gate Installation
Swing gates are the default on Waxhaw’s estate properties, usually a double gate across a wide driveway. The failure point is almost always the hinge post, not the panel. Hal says it plainly: a gate sags in the hinge post, not in the middle. We size the post footings for the weight of the gate plus the operator, and we account for clay expansion and contraction that shifts posts seasonally here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Waxhaw
We install and service FAAC, BFT, and Linear operators, among others, and we stock common parts for Waxhaw jobs so we’re not waiting on a freight shipment while your gate sits half-open. Hal is certified to work on nine major brands, but the operator you choose matters less than whether it’s installed correctly and matched to the gate’s weight and duty cycle. We’ll tell you what actually fits your gate rather than selling you whatever’s on the truck.
Common Gate Installation Problems We See in Waxhaw Homes
- Builder-grade operators failing early. The 2000-2020 development boom put a lot of entry-level operators on Waxhaw gates, and many are dying before year ten. We replace them with appropriately sized units rather than just swapping in the same undersized motor.
- Hinge posts heaving in Union County clay. Red clay expands and contracts with wet and dry cycles, and a footing poured without over-excavation shifts the post and drops the gate. The fix is a properly sized footing, not just shimming the hinge.
- Missing power and conduit runs. Retrofitting automation onto a manual gate in Waxhaw often reveals that no one ran the 120-volt line or low-voltage conduit during construction. That means trenching across finished landscaping, which we handle in-house.
- HOA finish mismatches stalling repairs. A gate job that looks like a one-day hinge swap can sit for weeks if the replacement finish doesn’t match the community’s recorded architectural standards. We verify the required finish on the first call, not at inspection.
Pricing for Gate Installation in Waxhaw, NC
A typical single swing driveway gate with operator in Waxhaw runs $2,800 to $5,500, depending on gate size, operator type, and whether we’re trenching new power from the house. A double swing gate or decorative iron gate on brick columns usually falls in the $4,500 to $9,500 range. Sliding gates tend to run $3,500 to $7,800 once track, motor, and loop detectors are included. These are complete, turnkey numbers, quoted and agreed before any work starts, and there’s no trip charge inside the county.
| Gate Type | Typical Waxhaw Price Range |
|---|---|
| Pedestrian gate | $1,200 - $3,000 |
| Single swing driveway gate with operator | $2,800 - $5,500 |
| Double swing gate | $4,500 - $9,500 |
| Sliding gate with track and motor | $3,500 - $7,800 |
| Automation retrofit on existing manual gate | $2,200 - $4,800 |
Every estimate is free, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and Hal will give you a straight number, not a sliding range that changes when the crew shows up.
We installed a LiftMaster LA500 dual swing gate operator at an estate in the Millbridge community, where the original builder-grade operator had failed after just four years. We ran a new 120-volt line and low-voltage conduit that had never been installed during construction, set the hinge posts in over-excavated footings to account for Piedmont clay movement, and adjusted the safety photocells to UL 325 entrapment standards before the HOA’s final inspection. That’s the job done the way it should have been done the first time.
We Also Serve Cities Near Waxhaw
Gate Installation in Waxhaw keeps our crews close to Marvin, Wesley Chapel, Weddington, and Monroe too. If you’re just outside Waxhaw and not sure whether we cover your street, call (877) 610-2993 and ask. Chances are we were in your neighborhood last week.
Serving Waxhaw, NC - Our Local Coverage Area
We’re based in the Waxhaw area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Waxhaw
Yes, we match the HOA-specified finish, whether that’s matte black, bronze, or a custom powder coat, and we handle the written approval paperwork before ordering any visible hardware. A finish mismatch on visible gate hardware can stall a one-day job for weeks in Waxhaw, so we verify the community’s recorded architectural standards on the first call. Call (877) 610-2993 and we’ll check your community’s requirements before we quote.
A loop detector is required for safety on any automatically operated sliding gate, because the keypad only controls access, not what the gate does when a car is sitting in its path. Without a loop detector or equivalent entrapment protection, the gate can close on a vehicle or person, which violates UL 325 standards. We include the loop and the trenching for it in the quote, so you’re not paying extra after the fact.
Because the post footing was sized for the gate’s weight but not for Union County’s red clay, which expands and contracts through seasonal wet-dry cycles and shifts the post out of alignment. The fix is removing the post, over-excavating the footing, and setting a larger, deeper base that can handle soil movement. Shimming the hinge only delays the sag; it doesn’t stop it. Call (877) 610-2993 for a free look at your gate.
Yes, and this is one of the most common retrofits we do in Waxhaw, because most builder-installed manual gates didn’t include the power or conduit runs automation needs. We handle the full scope, including running the 120-volt line and low-voltage wiring across finished landscaping and setting the operator in a properly sized footing. The estimate covers the entire job, quoted before work starts.
Every automatically operated gate in Waxhaw must meet UL 325 safety standards, which means photocells, contact edges, or both, and proper force settings so the gate reverses if it meets resistance. We set the safety devices and test the reverse function before we leave, and we’ll show you how everything works. Call (877) 610-2993 and we’ll walk you through what your specific gate configuration requires.
Call Gatewood Fence & Gate for Gate Installation in Waxhaw
Hal Gatewood has been fixing and installing gates since 2001, and his name is on the shop. The shop has a published address and a license number you can look up. That’s the oldest accountability there is. If you want a gate installed right, matched to your HOA’s standards, and set in footings that will still be straight ten years from now, call (877) 610-2993 today. A live person answers, the estimate is free, and the price is locked before we start.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Waxhaw since 2001.