Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Vancouver
Gate installation in Vancouver runs between $2,800 and $9,500 for a standard driveway swing gate, with pedestrian gates starting around $1,200. Most jobs take one to two days on site, and we quote the full price before any work begins. If you live in Vancouver, you already know the real issue isn’t the gate panel. It’s what Clark County clay does to the hinge posts underneath it. Call (877) 610-2993 and a live person picks up, day or night.
We’ve worked gates in Fisher’s Landing, Orchards, downtown Vancouver, and the older bungalow streets west of I-5. Every neighborhood has its own failure pattern. That local knowledge means we bury footings below the frost line, spec stainless hardware where it matters, and show up when we say we will. Hal Gatewood has been at this since 2001, and his name is on the shop.
Why Gatewood Fence & Gate Is Vancouver’s Preferred Gate Installation Company
We’re locally owned and owner-operated, with a published address and a license number anyone can look up. Hal Gatewood signs every invoice. When we install a gate in Vancouver, the person who quotes the job is the same person who shows up with the welder. No faceless crew, no dispatch queue, no call center three states away.
Vancouver homeowners have told us the same story for years: a national outfit quoted one number on the phone, then tried to change it at the driveway. We don’t do that. The price we quote is the price you pay, in writing, before we touch a tool. Every Gatewood job carries the 90-Day Done Right Promise: if it’s not done right, one call brings Hal back. No runaround, no fine print.
We also answer the phone with a live person, 24 hours a day, 7 days a week. When your gate won’t close and your dog is eyeing the street, you don’t want voicemail - you want Vancouver Gate Access Control help that actually answers. You want a person who knows Vancouver’s gate problems and can tell you what’s actually wrong. That’s us.
Our Gate Installation Services in Vancouver
Every gate installation we do in Vancouver starts the same way: we look at the posts. A new gate panel on bad footings is a door on a broken frame. That’s where we start, and that’s why our Gate Installation team spends time on preparation, not just the panel.
Driveway Gate Installation
Driveway gates in Vancouver’s east-side subdivisions, especially the 1990s and 2000s tracts off SE 192nd Ave and Mill Plain, often sit on footings that production builders poured above the frost line. In clay soil that swells every winter, those posts move. We dig deeper, set footings below 18 inches, and use stainless-steel hardware so the gate still swings true in April. A typical driveway swing gate installation in Vancouver runs $3,200 to $9,500 depending on width, automation, and post condition.
Pedestrian Gate Installation
Pedestrian gates in Vancouver see daily use, and the latch is usually the first thing to fail. We install gates with heavy-duty stainless latches and galvanized or powder-coated frames that hold up to months of rain. Starting around $1,200 for a standard 4-foot gate, including new posts set below frost depth. If you’re near downtown Vancouver where older bungalows have narrow side yards, we adjust the swing arc so the gate clears fences and shrubs.
Sliding Gate Installation
Sliding gates are a good fit for Vancouver driveways with a slope or limited swing clearance. But sliding gate tracks fill with clay and debris in a wet Clark County winter. We install cantilever sliding gates where possible, so the gate rides above the ground instead of through a track that clogs. Expect $4,500 to $11,000 for a full sliding gate installation with automation, depending on length and operator brand.
Swing Gate Installation
Swing gates are the most common installation in Vancouver, and the hinge post is everything - which is why Gate Repair - Vancouver calls so often start with post issues. In Fisher’s Landing and similar east-side areas, we regularly see original galvanized hinge posts heaved 3 or more degrees off plumb after a couple of wet winters. We replace with deeper footings and stainless fixings, then hang the panel with sag correction so it latches clean instead of binding. A single swing gate with proper post work runs $2,800 to $7,500, and a double gate typically runs $5,000 to $12,000.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Vancouver
We’re certified to service and install Viking, Ghost Controls, DoorKing, Elite, and five other major gate operator brands. For Vancouver specifically, we keep Vancouver Doorking service and Ghost Controls operators ready because they hold up better to moisture than some cheaper boards. We replace corroded LiftMaster units regularly in east-side Vancouver homes where the original operator spent 20 years trapped in a damp housing. Parts are available locally, which means less waiting when your gate operator dies mid-winter. We stock the boards and remotes Vancouver customers ask for most, so a repair often happens same day or next day rather than shipping from somewhere in the Midwest.
Common Gate Installation Problems We See in Vancouver Homes
If you live in Vancouver, your gate faces conditions that don’t show up in a dry inland city. Here’s what we fix most often:
- Heaving hinge posts from expansive clay. Clark County clay absorbs winter rain, swells, and pushes shallow footings upward. Gates that closed fine in December bind or won’t latch by April. The fix is a deeper footing below the frost line, not a new gate panel.
- Rust bloom at welds on galvanized swing gates. Galvanized coating fails first where the metal was welded, and Vancouver’s persistent fall-through-spring moisture accelerates that rust. Within 15 to 20 years, the post is compromised while the gate panel still looks fine. We weld on site and spec stainless hardware where it counts.
- Corroded operator boards from trapped moisture. Vancouver sits far enough inland to catch hard freezes and ice storms, but wet enough that condensation lingers inside operator housings. We’ve opened LiftMaster boards from 1990s Fisher’s Landing homes that were green with corrosion. A sealed housing and a quality board matter here.
- Frost-heaved vinyl frame cracks after ice storms. Unlike milder coastal areas, Vancouver’s occasional hard freezes crack vinyl gate frames that were fine for years. Combined with clay expansion, that’s a gate that looks tired before its time. We replace with materials rated for Clark County’s freeze-thaw cycle.
Pricing for Gate Installation in Vancouver, WA
Here are honest ranges for Vancouver’s market, not national averages:
| Gate Type | Typical Vancouver Price Range |
|---|---|
| Pedestrian gate (standard 4 ft) | $1,200 - $2,800 |
| Single swing driveway gate | $2,800 - $7,500 |
| Double swing driveway gate | $5,000 - $12,000 |
| Sliding driveway gate | $4,500 - $11,000 |
| Operator / automation only | $900 - $2,400 |
What moves the price in Vancouver is post work. If your existing posts are heaved or rusted, we dig new footings below the frost line, which is part of a proper installation, not an add-on surprise. The quote you get before we start is the price you pay, period. We offer free estimates, $40 off any job over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 to set a time. We show up when we say we will.
We Also Serve Cities Near Vancouver
Our crews regularly install gates in Minnehaha, Barberton, Five Corners, and Walnut Grove, plus the surrounding Clark County neighborhoods. If you’re in one of those areas, the same local knowledge and the same written 90-Day Done Right Promise apply. We know the soils, the subdivisions, and what fails first on a gate around here. Call (877) 610-2993 and we’ll get you scheduled. For more on the areas we cover, see our Gate Installation in Vancouver overview.
Serving Vancouver, WA - Our Local Coverage Area
We’re based in the Vancouver area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Vancouver
Most of those posts were not installed correctly for Vancouver’s soil. Clark County clay expands when saturated by winter rain and contracts in summer, and if the footing sits above the frost line (which many production-builder footings do), the post heaves upward and outward every spring. The gate panel looks fine; the foundation under it was shallow. The fix is digging a deeper footing below 18 inches and setting the post in a way that resists clay expansion. Call (877) 610-2993 and we’ll check your posts before you buy a new gate.
Painted steel alone is not enough in Vancouver. The persistent fall-through-spring moisture in Clark County gets under paint at every scratch, hinge, and weld seam, and rust spreads from there - that’s where Gate Parts & Welding - Vancouver work becomes critical. Galvanized steel with stainless fastenings lasts far longer. We recommend galvanized frames with a powder coat for looks, and we swerve away from bare painted steel anywhere near the coast-influenced wetness Vancouver gets.
We’ve had the best luck with DoorKing and Ghost Controls operators in Vancouver. Their boards are sealed better against the condensation that lingers in operator housings after ice storms and wet winters. We also replace corroded LiftMaster boards regularly in older east-side homes, so if your operator is original and 15-plus years old, it’s on borrowed time. We stock replacements locally for faster turnaround. Call (877) 610-2993 for a free second opinion on your current operator.
In Vancouver, driveway gate post footings should be at least 18 inches deep, and we go deeper in flat east-side developments where drainage is slower and clay content is higher. Shallower footings sit in the freeze-thaw zone and get pushed around by ice and expanding clay every winter. We don’t skim this step, because a gate with a moving post will never latch right. Estimates are free, and the depth is part of the quote.
For most Vancouver driveways, yes, we recommend a loop detector or a vehicle sensor so the gate opens automatically for exiting cars and closes without you pressing a remote every time. On a hilly side street or a shared driveway, it also prevents the gate from closing on a vehicle. We install loop detectors as part of most automatic gate installations in Vancouver, and the cost is included in your quote, not added later.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Vancouver since 2001.