Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Upland
Gate installation in Upland generally runs $1,850 to $6,400 for a complete new gate and opener, depending on whether it’s a light chain-link driveway gate in the 91786 flatlands or a heavy ornamental double swing gate on a San Antonio Heights foothill lot. We schedule most Upland installations within five to nine business days, and Hal Gatewood shows up on every estimate himself. If you’re tired of phone quotes that change when the crew arrives, call (877) 610-2993 and we’ll give you a written price before any work starts.
We’ve worked Upland long enough to know that a gate installation here isn’t the same job as one in Ontario or Rancho Cucamonga. The wind, the hillside lots, the older tract pads, the shared driveways off Euclid Avenue – all of it shapes what we build and how we build it. Our Gate Installation crew handles everything from a pedestrian gate beside a 1968 rancher in 91786 to a 16-foot sliding gate on a shared right-of-way up in 91784.
Why Gatewood Fence & Gate Is Upland’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is still on the invoice. That’s the kind of accountability Upland homeowners tell us they were missing from the big franchise outfits. When we say a gate will hold, we mean the welds will hold through the next Santa Ana event down the Cucamonga gap, not just through the walk-through.
Our Upland customers call the same number, reach a live person, and get a real answer. No voicemail, no call center three states away. If you want to drive to the shop and look Hal in the eye, you can. The address is published, the license number is verifiable, and we’ve been doing it for over 29 years – owner-operated the whole time.
Every Upland job carries the 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back. That’s not buried in fine print. It’s stamped on the work order.
Our Gate Installation Services in Upland
Driveway Gate Installation
The driveway gates we install across Upland split into two very different jobs. Down in 91786, we’re often replacing a sagging chain-link or light tubular steel gate that’s been on the same poured concrete pad since the Carter administration. Up in 91784, we’re setting heavy custom ornamental iron on fresh footings, usually with a FAAC or LiftMaster operator sized for a gate that catches real wind.
Pedestrian Gate Installation
A pedestrian gate alongside a driveway is common on Upland’s older lots, especially where the side yard wraps behind a detached garage. We build them to match the driveway gate’s material and finish, and we set the post deep enough to stay plumb when the summer heat dries out the foothill soil.
Sliding Gate Installation
Sliding gates are what Upland calls for when a swing gate can’t happen: uphill driveways where a swinging leaf would catch grade, narrow side yards off Euclid Avenue, tight frontages on 91786 tract lots, and shared driveways where a swing arc would block the neighbor’s right-of-way. We install rack and pinion slide gates with safety photocells, and we set the V-track on a proper receiver footing so it doesn’t drift out of alignment in the first year.
Swing Gate Installation
Heavy ornamental swing gates are the signature of San Antonio Heights. They’re beautiful, and they’re the first thing the Santa Ana winds punish. When we hang a double swing gate in 91784, we set oversized hinge posts in deep concrete with through-bolts, and we brace the frame corners for wind load that most installers never account for.
Security Gate Installation
Security gates in Upland often mean a new automatic gate paired with a coded keypad, phone-entry system, or loop detector. On foothill properties inside the wildland-urban interface overlay, we also coordinate the Knox Box or fire department rapid-entry hardware so the gate doesn’t fail its final Fire Department inspection.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Upland
We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Upland, that matters because a gate operator’s serviceability often decides whether the next repair is a $140 board replacement or an $800 full-motor swap. We keep common Linear and FAAC control boards in stock, and when a north Upland operator needs a limit switch or gear set, we can usually have the part in hand within two days. Hal installs brands for their track record, not because he’s locked into one supply line.
Common Gate Installation Problems We See in Upland Homes
- Santa Ana wind fatigue on foothill swing gates. The Cucamonga gap funnels wind straight into north Upland, and a heavy swing gate becomes a sail. Hinge welds crack, posts lean, and openers burn out faster here than anywhere else in the Inland Empire.
- Rack and pinion misalignment on older sliding gates. The 91786 tract homes often have a sliding gate on the original concrete pad, and 40 years of Cucamonga Valley hard water has corroded the rack hardware. The opener strains, the gate shudders, and eventually the gear strips.
- Opener electronics failing in 100°F heat. Upland summers bake gate operator housings, and circuit boards, plastic gears, and rubber limit bumpers degrade noticeably faster than they do in coastal installations. We recommend shaded housing and quality boards for new installs.
- Shared driveway rights-of-way. Many Upland lots, especially in the older central grid, share a driveway. That means the gate has to slide or swing without eating into the neighbor’s access, and the opener can’t block the shared fire authority turnaround.
Pricing for Gate Installation in Upland, CA
Here’s what a complete gate installation runs in Upland’s market:
| Gate Type | Typical Upland Price Range |
|---|---|
| Pedestrian gate (wrought or tubular steel) | $950 - $2,400 |
| Single driveway swing gate (light, no opener) | $1,850 - $3,800 |
| Double driveway swing gate (ornamental iron) | $4,200 - $7,900 |
| Sliding driveway gate with opener | $3,400 - $6,400 |
| Automatic opener installed on existing gate | $1,100 - $2,800 |
The spread depends on two things: whether we’re rebuilding the footings (common on 91786 tract pads) and how heavy the gate is. A 16-foot sliding gate for a shared driveway in San Antonio Heights with a new operator and safety photocells lands near the top of that sliding range. Every Upland job gets a written price before Hal starts work, and that price is the price. No trip charge inside the county, and there’s $40 off any repair over $200 if installation work turns up an existing gate that needs attention.
We Also Serve Cities Near Upland
Most of our work is in Upland itself, but we regularly run crews to Claremont, Montclair, Rancho Cucamonga, and Ontario when a neighbor asks or an existing customer moves. If you’re just over the city line, call (877) 610-2993 and ask; the estimate is free either way.
Serving Upland, CA - Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Upland
Yes. Sliding gates on shared driveways in Upland’s 91784 area generally require a city permit, and if the property falls within San Bernardino County’s wildland-urban interface overlay, you’ll also need fire department sign-off on emergency vehicle access, which often means a Knox Box or approved coded entry. Hal handles the permit paperwork for Upland customers and will tell you upfront what your project needs, not after the footing is poured. Call (877) 610-2993 for a free estimate and we’ll walk you through it.
It’s the Santa Ana wind corridor. When wind accelerates through the Cucamonga gap, a north Upland swing gate turns into a lever against the opener’s gear train every time a gust hits it, while Ontario’s flatter lots see far less concentrated wind load. That repeated resistance chews through motors and strips plastic gear sets years earlier than the same opener would fail elsewhere. The answer is a properly sized operator with wind bracing, not a bigger motor jammed into the existing housing. Call (877) 610-2993 and Hal can tell you what your gate actually needs.
Yes, and we do it often in Upland, particularly on 91786 tract lots where the front elevation leaves no room for a swing gate’s arc, or on uphill driveways where a swinging leaf would bind on the grade. A sliding gate needs usable side clearance for the gate leaf to retract, and if that doesn’t exist, a telescoping slide or a lifting gate becomes the conversation. We’ll measure, show you the options, and quote the right one.
A loop detector is an induction wire buried in the driveway that senses the metal mass of a vehicle, and it’s what tells the gate operator “the truck is clear, close the gate.” On Upland’s equestrian properties in the San Antonio Heights area, we set the loop at a distance that accommodates trailers and horse rigs, not just a sedan, so the gate doesn’t try to close while a trailer is still over the loop. That detail prevents a lot of crushed fender damage we see on gates installed by shops that don’t think about horses.
California requires automatic gate operators to have inherent entrapment protection, which means the motor senses resistance and reverses, plus an external monitored device – typically photoeyes or a contact edge – on the gate’s leading and trailing edges. Upland’s building department enforces this on new installations, and it’s also why our sliding gate installs include safety photocells as standard. We don’t install an automatic gate without it. Call (877) 610-2993 for a free estimate on a new automatic gate – the estimate is free, and Hal will explain the safety equipment line by line.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Upland since 2001.