Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Temple Terrace
Gate installation in Temple Terrace runs $1,800 to $7,500 for most residential jobs, with a full custom driveway gate on the higher end and a standard pedestrian gate on the lower end. A simple aluminum-frame gate off the rack costs less, but most Temple Terrace homes need something sturdier than a box-store panel. This city’s humidity, lightning, and 1920s historic districts each shape the job in ways a general fence crew from Tampa won’t think about. We do. Call (877) 610-2993 and we’ll walk your property, measure, and give you a number in writing before any work starts.
Why Gatewood Fence & Gate Is Temple Terrace’s Preferred Gate Installation Company
Hal Gatewood put his name on this company in 2001, and he has not taken it off since. Temple Terrace customers don’t get a rotating crew of subcontractors. They get Hal, or people Hal trained. The shop address is published, the license number is verifiable, and if a gate we installed gives you trouble inside 90 days, one call brings us back, no runaround and no invoice. That’s the Gate Installation promise in writing on every job we do.
We’re familiar with the neighborhoods around Busch Boulevard, Fowler Avenue, and the golf course, and we know what the HOA covenants in the older planned sections expect. Dispatch and scheduling are coordinated from our Miami office, but the crew that shows up in Temple Terrace is local to the job. They know the difference between a 1920s ornamental hinge and a 1970s aluminum bracket, because they have worked on both in Temple Terrace.
Calls reach a live person, day or night. Not a voicemail tree. Not a call center. Someone picks up and talks to you, because a gate that won’t open at 6:00 a.m. on a workday can’t wait until Monday.
Our Gate Installation Services in Temple Terrace
Driveway Gate
A driveway gate in Temple Terrace does two jobs: it keeps the street out, and it has to survive being opened and closed in high humidity every day for years. We install single-swing, double-swing, and sliding driveway gates, sized to your driveway’s width and post depth. On older Temple Terrace estates, we match the gate to the existing masonry pillars rather than ripping them out. On 1950s and 1960s slab homes, we often set new posts with deeper footings than the original, because the wet-season ground saturation in this part of Hillsborough County makes shallow posts lean within a few years.
Pedestrian Gate
Pedestrian gates take more abuse per opening than driveway gates because they get used more often. The latch, the hinges, and the closer do the real work. In Temple Terrace’s inland humidity corridor, steel hinges rust at the weld points first, and latches seize from moisture and pollen. We install pedestrian gates with stainless or galvanized hardware as the default, not an upsell. You end up with a gate that opens quietly three years from now, not one you have to shoulder through.
Sliding Gate
Sliding gates work well on flat Temple Terrace lots with long driveways, especially where a swing gate would arc over a sidewalk or landscaping. They need a straight, level track and a solid post at the motor end. The local conditions here mean the track should be mounted on concrete, not packed soil, because the June-September rains wash out unbedded track supports faster than you would believe. We handle the whole installation: concrete pad for the operator post, track, gate fabrication, and the opener itself.
Swing Gate
Swing gates are the most common style in Temple Terrace’s older neighborhoods, and for good reason. They fit the Mediterranean Revival look, and they work with the existing masonry columns. The weak point is always the hinge post. In the 1920s-era section around the Temple Terrace Golf & Country Club, original wrought-iron hinge posts have spent a century in Hillsborough River humidity, and many are thinned at the base from rust. We check the post before we hang a new gate. If the post is compromised, we set a new one with a deeper footing and stainless hardware, then fabricate the gate to match the ironwork character.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Temple Terrace
We’re certified to service and install openers from LiftMaster, DoorKing, Linear, and Ghost Controls, among others. That matters in Temple Terrace because the local failure pattern is so consistent: summer lightning hits, the control board fries, and the gate stops mid-swing. We keep common Linear and DoorKing control boards stocked so we are not waiting on a parts truck when your gate is stuck open. If you’re retrofitting a modern opener onto an older gate, we’ll tell you which brand and model actually fits the gate’s weight and duty cycle, not just whichever box is on the shelf. Surge suppression goes on every opener we install here, because it’s the cheapest insurance you’ll ever buy against a Tampa Bay lightning strike.
Common Gate Installation Problems We See in Temple Terrace Homes
- Rusted-through 1920s hinge posts and hinges. Decades of Hillsborough River humidity eat wrought iron from the inside out. By the time the gate sags or detaches, the post is often beyond a welded patch. We check the post before anything else, because fixing the panel without the post means fixing it twice.
- Fried opener control boards after summer storm clusters. The Tampa Bay region has some of the highest ground-strike frequencies in the country, and Temple Terrace is right in the path. After a cluster of afternoon lightning storms, we see a run of dead boards and shorted wiring harnesses. A surge suppressor installed in 30 minutes prevents most of it.
- Flooded ground-level hardware during the wet season. From June through September, near-daily downpours saturate the soil around gate posts. Low-mounted opener housings and ground-level sensors take on water, short out, and corrode. We mount housings higher and use sealed enclosures, which costs little at install time and saves a service call later.
- HOA covenant conflicts in the planned-community core. The neighborhoods around the original Temple Terrace golf community were designed with a specific aesthetic, and many covenants still carry language about ornamental ironwork and entry character. We have helped homeowners fabricate replacement gates that satisfy the covenant language and the actual engineer for the gate, not just one or the other.
Pricing for Gate Installation in Temple Terrace, FL
A standard single-swing driveway gate in Temple Terrace runs $2,200 to $4,800 installed, including posts, gate fabrication, and a basic manual setup. Adding an automatic opener from LiftMaster or DoorKing typically adds $1,300 to $2,900 depending on the gate’s weight and the opener’s duty rating. A pedestrian gate runs $1,200 to $2,500, and a custom wrought-iron gate designed to match 1920s Mediterranean Revival ironwork runs $3,500 to $7,500 or more, because that’s fabrication work, not a panel swap. A sliding gate on a concrete track runs $3,000 to $6,500 depending on width and motor.
You get the exact number before we start. Not an estimate that might change at the door. The price we quote is the price on the invoice. Call (877) 610-2993 and we’ll come measure, talk about what the gate actually needs to do, and put it in writing. Estimates are free, and nobody from our crew will pressure you to sign on the spot.
We Also Serve Cities Near Temple Terrace
If you’re just outside Temple Terrace, we handle gate work in East Lake-Orient Park, University, Carrollwood, and Lake Magdalene too. The same crew, the same pricing, the same 90-Day Done Right Promise. If you’re in one of those nearby communities and wondering whether we cover your street, call (877) 610-2993 and ask. Chances are we already have a job on your block. Our full service area is covered on our Temple Terrace page.
Serving Temple Terrace, FL - Our Local Coverage Area
We’re based in the Temple Terrace area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Temple Terrace
It affects it less directly than in South Tampa or on the peninsula, but it still matters. Temple Terrace sits in Hillsborough County’s inland humidity corridor, and the moisture pulled inland from the bay plus the Hillsborough River keeps air damp even when you’re miles from the coast. The bigger killer here is not salt spray but persistent humidity. Steel hinges rust at the weld points, painted mild steel loses its finish at the edges, and aluminum frames corrode at the screw penetrations. That’s why we default to stainless hinges and galvanized or powder-coated fasteners on every Temple Terrace install. They cost a little more up front and last years longer.
Because the Tampa Bay area has one of the highest ground-strike frequencies in the US, and Temple Terrace sees the same storm clusters as the rest of Hillsborough County. A nearby lightning strike sends a surge through the power lines or even through the ground wire, and the control board chips are the first thing to fail. We see this pattern every summer: a cluster of afternoon storms, then a run of dead boards. The fix is a properly rated surge suppressor on the opener’s power circuit, and on the low-voltage accessory wiring too. We install them as standard on every opener we put in around here. If your board is already dead, we can replace it same day in most Temple Terrace neighborhoods.
Usually, yes. The gate itself can be heavy, so we check the weight and duty cycle before recommending an opener. Most original 1920s wrought-iron gates are light enough for a residential LiftMaster or DoorKing swing opener, but the mounting points and hinge posts have to be sound. If the hinge post is rusted thin from a century of humidity, we replace or reinforce it before adding the weight of an opener. We also match the opener arm and bracket to the gate’s ornamental look where possible, so you’re not bolting a modern commercial arm onto a gate that was designed to match a Mediterranean Revival estate. The historic character stays intact; the convenience gets modern.
For most Temple Terrace mid-century homes with existing aluminum-frame gates, the best replacement is a powder-coated steel or aluminum gate built to the same dimensions, with stainless hardware from the start. The original aluminum frames from the 1950s and 1960s are often corroded at the bottom rail and the hinge penetrations, and welding a patch onto thin aluminum is rarely worth the labor. A new gate with a powder-coated finish and stainless hinges will outlast the original by a wide margin in this humidity. If you want to keep the same basic look, we’ll match the frame profile and the picket spacing, so the new gate reads as a direct replacement.
Yes. Automatic gates in Florida are required to meet UL 325 entrapment protection standards, which means photoelectric sensors, reversing edges or both, depending on the gate and the opener. We install the required safety sensors and test them before we leave. This is not optional and it should not be deferred. A gate that closes on a person or a pet is a serious injury, and every automatic gate we install in Temple Terrace gets the full entrapment protection package as standard. Call (877) 610-2993 to talk through what your specific gate needs.
If you need a gate installed in Temple Terrace, call (877) 610-2993. We’ll come out, measure, look at the site, and give you a written price. No pressure, no same-day arm twisting. Just a straight number from a company whose name is on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Temple Terrace since 2001.