Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tempe Junction
Gate installation in Tempe Junction typically runs $1,800 to $6,500 depending on whether you’re putting in a new sliding vehicle gate at an apartment complex or a swing gate on a shared driveway. Most jobs take one to three days once materials and the site measure are done, and Gatewood Fence & Gate quotes the full price in writing before any work starts. Hal Gatewood has been at this since 2001, and he answers the phone himself. Call (877) 610-2993 for a free measure and straight numbers, not a ballpark.
Tempe Junction is different from the rest of the Valley, and you know it if you live or work near the 85287 ZIP. The gates here cycle constantly, get hammered by monsoon dust, and sit in the kind of heat that cooks a cheap operator in two summers. We plan for that before we ever dig a hole.
Why Gatewood Fence & Gate Is Tempe Junction’s Preferred Gate Installation Company
We’re owner-operated, not a franchise. Hal Gatewood’s name is on the shop and the shop is down the road, which is the oldest accountability there is. When you call, a person answers. Not a phone tree, not a service three time zones away. Hal or one of his crew members will answer at 2 a.m. during a move-in surge just as quickly as at 2 p.m.
Most of our work in Tempe Junction comes from apartment complexes along Apache Boulevard, university-adjacent properties, and older infill commercial sites where gate systems get pushed harder than they were ever designed to be pushed. We keep parts for high-cycle operators on hand because we know late July and August bring a wave of failed motors and snapped drive chains near Tempe Junction that a shop in another part of town won’t anticipate. The local angle matters. A gate that cycles 100 times a day for a month fails differently than one that opens twice a day for a single family.
Background-checked, uniformed people show up for every job. You’ll see the same face on the measure as on the install. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround. No fine print.
The response time to Tempe Junction is usually same-day for a site visit on urgent failures, and we schedule installs around your access needs so the gate keeps working while we work. For new installs we come measure, give you a written price, and set a date that works with your traffic patterns.
Our Gate Installation Services in Tempe Junction
We do the full range of gate work, but here’s what matters most in Tempe Junction specifically. The 85287 corridor is dense, tight, and high-traffic. That shapes everything.
Sliding Gate Installation
Sliding gates are the workhorse of Tempe Junction. Where a swing gate leaf would block a fire lane or hang into a shared right of way, a slide gate is often the only legal option. We install and upgrade cantilever and rack-and-pinion slide systems, and we stock rack sections, rollers, and Gate Parts & Welding in Tempe Junction supplies locally because monsoon dust wrecks these faster than anything else in the Valley. A typical slide gate install in Tempe Junction runs $2,500 to $6,500, with operator-grade and track quality driving most of the difference.
Swing Gate Installation
Swing gates work well on the wider entrances you see on older 1970s and 1980s apartment complexes off Rural Road and near the university. The catch here is hinge posts. We see undersized posts all over Tempe Junction, and a gate sags in the hinge post, not in the middle. We won’t hang a double drive gate on a post that can’t carry it. Expect $1,800 to $4,500 for a single swing gate install, and more for a double leaf on a wide commercial approach.
Pedestrian Gate Installation
Pedestrian gates in Tempe Junction often serve pool areas, utility enclosures, and rear alley access for apartment buildings. These get lighter use but still need to hold up to UV and monsoon grit. We do steel pedestrian gates, matching posts, keypad entry, and magnetic locks. Most installs run $900 to $2,200 depending on width and the lock hardware.
Double Gate Installation
Double gates on narrow rights of way are a Tempe Junction specialty because so many properties here were built dense. Two leaves mean two operators or a lot of hardware, and that means the foundation and our Gate Access Control in Tempe Junction setup matters. We dig proper footings sized for the post and the soil, set the posts in concrete, and square everything before the gate ever hangs. Double gate installs in Tempe Junction typically run $3,500 to $8,000 when you include both operators and the control loop.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tempe Junction
We install and service operators from LiftMaster, Linear, DoorKing, Viking, and Ghost Controls, along with FAAC, BFT, and Elite. For Tempe Junction apartment complexes, Linear and DoorKing are the two brands we see most often on existing gates, and we keep their high-wear parts on the truck: drive chains, limit switches, loop detectors, and thermally rated photocells. If your complex is still running an aging LiftMaster slide operator, our Gate Repair - Tempe Junction team can usually upgrade it on the same visit rather than making you wait for a specialty order. That matters in late July when a gate is cycling nonstop and no one has time for a parts delay.
Common Gate Installation Problems We See in Tempe Junction Homes
- Monsoon-pack track channels on slide gates. Haboobs rolling up the Salt River corridor dump alkaline dust into slide gate tracks and operator housings all summer. That grit grinds rack and pinion teeth and overloads drive motors. We clear tracks, set proper drainage, and add sealed covers where the site allows.
- Undersized hinge posts from the 1970s and 1980s. Older apartment complexes in the 85287 area often have hinge posts that were too small to begin with. The thermal expansion of steel in 110°F afternoons makes it worse. A gate that sags in the hinge post will never hold, no matter how many times you adjust the leaf.
- Photocell faults on hot afternoons. Steel posts expand in sustained heat and knock the safety beam out of alignment. The gate reverses or refuses to close, and property managers assume the operator is bad. Half the time it’s a misaligned photo eye. We set them with thermal compensation so the 3 p.m. heat doesn’t shut the gate down.
- Wrong gate type for the right of way. We regularly see swing gates installed on shared driveways where the leaf swings into the neighbor’s access or blocks a fire lane. In Tempe Junction many rights of way are too tight for a swing gate, and the fix is a slide gate on a properly sized footing. Fix the panel without the post and you’ll fix it twice.
Pricing for Gate Installation in Tempe Junction, AZ
Here are honest numbers for Tempe Junction, not a range from a national price sheet. A single swing gate install runs $1,800 to $4,500. A sliding gate with a new operator runs $2,500 to $6,500. A double drive gate with two operators runs $3,500 to $8,000. Pedestrian gates run $900 to $2,200. The spread depends on gate width, operator brand, whether we’re pouring new footings, and whether existing posts can be reused. Every price is quoted and agreed before any work starts. We don’t have a “trip charge” inside the county for estimates, and we’ll give a free second opinion on any written estimate you already have from another company. Standing offers: $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and Hal will give you the straight number.
We Also Serve Cities Near Tempe Junction
Our crews cover Tempe Junction and the surrounding areas including Tempe Junction, Tempe, Guadalupe, Central City, and Ahwatukee Foothills. If you’re just outside the 85287 ZIP and need Gate Installation done right, call and we’ll let you know which day works.
Serving Tempe Junction, AZ - Our Local Coverage Area
We’re based in the Tempe Junction area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tempe Junction
They fail in late summer because the ASU move-in surge pushes vehicle slide gates well past 100 open/close cycles per day in late July and August, at the same time monsoon humidity and dust are at their peak. Motor gearboxes run hot, dust packs into the track, and drive chains snap under the repeated load. A residential gate in Scottsdale or Mesa might cycle 10 times a day. A Tempe Junction complex gate might cycle 10 times in one hour during move-in week. That’s a different duty cycle entirely, and it’s why we stock replacement motors and rack sections before August hits. Call (877) 610-2993 and we’ll come take a look before the next surge.
Usually not, and we’ll tell you that straight. If the right of way is narrow and the swing leaf would overhang a shared use area, it violates city fire access requirements and creates a liability for the property. The right solution is a slide gate mounted on a properly sized footing with rail or cantilever supports. Our crew installed a new slide gate operator on a shared driveway off Apache Boulevard where a swing gate would have blocked the adjacent fire lane. We replaced a burned-out LiftMaster motor and a snapped rack and pinion drive chain, then set the loop detector and safety photocell so the gate stayed clear for both cars and pedestrian keypad entry. If your site forces a choice between swing and slide, we’ll measure, show you the layout, and give you a written price for the legal option. Call (877) 610-2993 for a free measure.
A haboob will dump fine alkaline dust into the operator housing, the track channel, and the limit switch housing in about 20 minutes. That dust accelerates gear wear, clogs the clutch, and can trip the operator’s thermal overload. New installs in Tempe Junction need sealed operator covers, elevated track drainage, and a service schedule that keeps dust from building up. We set every install to shed dust and water rather than catch it. Call (877) 610-2993 if your gate has started grinding after a storm.
UL 325 requires a monitored safety photocell or contact edge on both entrapment zones of a vehicle gate, plus a functioning reverse loop or inherent entrapment sensor on the operator. For multi-family housing in the 85287 ZIP, code enforcement specifically checks that the photo eye is aligned, the edge sensor works, and the operator reverses immediately on contact. Older 1970s and 1980s complexes often run LiftMaster or Linear operators without current UL 325 compliance, and that’s a real liability for the owner. We bring every install up to current entrapment code and document it. Call (877) 610-2993 for an inspection and a written report.
Generally not for a shared vehicle gate that cycles 100 or more times a day. Solar panels in this heat degrade faster than on a single-family gate, and the battery bank won’t keep up with move-in traffic. A solar opener works for low-cycle pedestrian or rear service gates. For a shared slide gate on Apache Boulevard or any ASU-area complex, a hardwired 110V operator is the right call. We’ll tell you the same thing on the phone before you spend a dime. Call (877) 610-2993 for a straight answer and a free site measure.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tempe Junction and surrounding communities since 2001.