Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across South Miami
Gate installation in South Miami comes down to one thing most homeowners don’t realize until the permit gets rejected: Miami-Dade County requires a Notice of Acceptance (NOA) number on every permitted gate panel and automated operator. We handle that paperwork and product sourcing every week, so your gate goes in right the first time. From 1950s wrought iron swings off SW 62nd Avenue to modern aluminum sliders on newer builds along Sunset Drive, we install and retrofit gates that actually hold up in this humidity. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is South Miami’s Preferred Gate Installation Company
Hal Gatewood started this company in 2001, and his name is on the shop and on every invoice. That’s the kind of accountability South Miami homeowners tell us they’ve been missing. When you call, you get a person who knows gates, not a phone tree. When we quote a price, that’s the price you pay, agreed before any work starts.
Our crews serve South Miami locally, coordinated from our Miami (South FL) office. We know the 33143 streets, the setback rules, and the inspection quirks that come with Miami-Dade product approval. More importantly, we know what happens to a gate here after five years of salt air and humidity: hinge posts rust through at the base, slide tracks warp, and openers that were never sealed against tropical moisture fail early. We install with that in mind.
Every installation carries our 90-Day Done Right Promise in writing. If something isn’t right, Hal comes back and makes it right. No runaround, no fine print. We’re background-checked, uniformed, and certified to service nine major gate brands including Viking, Ghost Controls, DoorKing, and Elite.
Our Gate Installation Services in South Miami
Driveway Gate Installation
A new driveway gate in South Miami typically runs $3,800 to $9,500 installed, depending on width, material, and whether you’re adding automation. Most homes here want a sliding or swing gate that clears the short setbacks common on the 1950s-1970s lots around Sunset and Red Road. We measure, pull the Miami-Dade NOA-listed hardware, and handle the permit application ourselves. You’ll know the full price before we order a single part.
Sliding Gate Installation
Sliding gates make sense on South Miami properties where the driveway slopes up from the street or where swing clearance is tight against a CBS wall. We install cantilever and track-style sliders with NOA-listed rack-and-pinion hardware, because out-of-county contractors often bring Broward-approved track systems that South Miami building rejects outright. A typical sliding gate install here lands between $4,200 and $10,000, automation included.
Swing Gate Installation
South Miami’s older neighborhoods are full of double swing gates hung on original wrought iron posts, and those posts are usually the first thing to go. We install new swing gates with galvanized and powder-coated hinges, sag-corrected panels, and operators that meet UL 325 entrapment standards. Expect $3,200 to $8,000 for a single swing gate with operator, more for a double gate with two panels.
Pedestrian Gate Installation
Pedestrian gates in South Miami serve a practical purpose: keeping kids and pets in while letting delivery people reach the door without opening the driveway. We build and set matching pedestrian gates beside existing driveway gates, with self-closing hinges and keypad or intercom access where you want it. A straightforward steel or aluminum pedestrian gate runs $900 to $2,800 installed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in South Miami
We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which covers nearly every opener we encounter in 33143. For South Miami customers, that means we keep common control boards, photo-eyes, and receiver parts stocked locally, so a repair doesn’t sit waiting on a part from Texas. When we install a Ghost Controls or Viking operator on your new gate, we’re also the crew that services it for the next decade. One number to call, one company that knows the whole system.
Common Gate Installation Problems We See in South Miami Homes
- Rusted-through hinge posts on legacy iron gates. South Miami’s humidity and salt air from Biscayne Bay oxidize wrought iron fast. The post fails at the base within 5-7 years, long before the gate panel shows serious rust, and the gate starts sagging and scraping the driveway.
- Pre-1992 swing gates with no entrapment protection. When a homeowner wants a motor added to an older swing gate, UL 325 requires photo-eyes and edge sensors. Many gates from the 1960s and 70s were never built for that, so the retrofit means replacing the operator or adding safety hardware.
- Non-NOA-listed slide gate hardware. We regularly see slide gates installed by out-of-county companies using tracks and rack-and-pinion systems that lack a Miami-Dade NOA number. The permit gets rejected, the gate sits unpermitted, and the homeowner is stuck fixing someone else’s shortcut.
- Wind-bent tracks after tropical storms. Hurricane season runs June through November, and after a strong storm the slide gate tracks on South Miami properties take a beating. Debris jams the rollers, wind bends the track, and the operator burns out trying to fight it.
Pricing for Gate Installation in South Miami, FL
What you’ll actually pay for gate installation in South Miami depends on the gate type, material, and whether automation is part of the job. Here’s what we’re seeing in 33143 right now:
| Gate Type | Typical Installed Range |
|---|---|
| Pedestrian gate (steel or aluminum) | $900 – $2,800 |
| Single swing gate, manual | $1,800 – $4,500 |
| Single swing gate, automated | $3,200 – $8,000 |
| Double swing gate, automated | $5,500 – $12,000 |
| Sliding gate, automated | $4,200 – $10,000 |
| Full driveway gate with operator, posts, and permit | $3,800 – $9,500 |
The big variables are gate width, whether we’re setting new posts or reusing existing ones, and the operator brand you choose. Every quote is written and agreed before we start. We also offer $40 off any repair over $200, no trip charge inside the county, and a 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near South Miami
Our Gate Installation team covers South Miami and the surrounding communities, including Glenvar Heights, Coconut Grove, Coral Gables, and Kendall. If you’re in one of those areas and need a gate built, retrofitted, or brought into Miami-Dade compliance, we’ll come measure and give you a written price. Same locally-owned crew, same 90-Day Done Right Promise. See our South Miami page for more on how we serve this specific area.
Serving South Miami, FL - Our Local Coverage Area
We’re based in the South Miami area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in South Miami
A Miami-Dade Notice of Acceptance (NOA) number is the product-approval certification that Miami-Dade County requires for any gate panel, hardware, or automated operator that goes into a permitted installation. South Miami falls under Miami-Dade’s building code, which is the strictest wind-load standard in the country, a direct result of Hurricane Andrew in 1992. If your gate system doesn’t carry a valid NOA, the permit application gets rejected and the installation can’t pass inspection. We source and specify NOA-listed products on every permitted job and list the number on the permit application. Call (877) 610-2993 if you’re unsure whether your current gate or a quote you received meets Miami-Dade requirements.
Yes, and in many South Miami homes that’s exactly the right fix. A gate sags in the hinge post, not in the middle. If the post itself is sound and only the base has rusted through, we can cut out the corroded section, weld in a new steel stub, and rehang the panel with sag correction. If the post is too far gone, replacement becomes the cheaper long-term answer. We’ll tell you which one you’re looking at after we inspect it and give you the price before any work starts. Call (877) 610-2993 and we’ll come look.
Yes, but it’s a retrofit, not a bolt-on. Older swing gates in South Miami were hung before UL 325 entrapment rules existed, so adding an operator means adding photo-eyes, edge sensors, and often a control board rated for continuous duty. We did exactly this on a 1960s CBS ranch off SW 62nd Avenue in 33143, where we replaced a rust-through hinge post on an original wrought iron swing gate and retrofitted a LiftMaster operator with a Miami-Dade NOA-listed control board, adding a safety photocell and loop detector to bring the legacy gate into UL 325 compliance. The panel was rehung with sag correction and the permit application carried the NOA number for the new operator. It passes inspection, and it opens like a new gate.
Almost always, it’s because the track, rack-and-pinion, or operator doesn’t carry a Miami-Dade NOA listing. Contractors from Broward or out of state routinely install slide gate hardware that passes permitting just a few miles north but fails in Miami-Dade, because the product-approval requirement doesn’t exist there. The result is a rejected permit and a non-conforming installation. We pull the NOA documentation on every slide gate we install in South Miami, and we can often re-spec and correct an installation another company left behind. Call (877) 610-2993 to have us look at what’s on your property now.
We prioritize storm damage calls after a hurricane or tropical storm moves through South Miami, and in most cases we can get a crew to your property within 24-48 hours once roads are clear. Wind-bent tracks, jammed rollers, and burned-out operators are the three most common failures we see, and we stock common track sections and roller assemblies locally so repair doesn’t wait on freight. If your gate is stuck open or binding after a storm, call (877) 610-2993, and we’ll get it moving again.
Need a gate installed, retrofitted, or brought into Miami-Dade compliance in South Miami? Call (877) 610-2993 for a free estimate. Hal Gatewood’s name is on the shop, and the person who answers the phone can actually help you.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving South Miami and the surrounding communities since 2001.