Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Shepherdsville
Gate installation in Shepherdsville runs roughly $1,900 to $7,800 for a standard residential driveway gate with an operator, and we usually schedule that work within one to two weeks of a free site measure. If you live along the Salt River bottom or in the newer subdivisions off Cedar Grove Road, you already know one thing: the ground moves here. Clay swells, frost pushes, and a gate post set at a generic depth will be leaning by the third winter. Call (877) 610-2993 and we’ll come out, look at your soil and your slope, and give you a written price before any work starts.
Why Gatewood Fence & Gate Is Shepherdsville’s Preferred Gate Installation Company
We’ve worked in enough Shepherdsville driveways to know that the land between 40165 and 40166 is not like the higher ground you pass driving toward Mount Washington. The clay under the topsoil holds water through winter, freezes solid, and then lets go in a way that wrenches posts out of plumb. When we install a gate in Shepherdsville, we size the footing for that movement. Deeper. Wider. More rebar. The person who welds the frame and bolts the operator is the same person who will answer your call if something acts up in March after the thaw.
Hal Gatewood started this shop in 2001, and his name is on the door. Our crews know the difference between a subdivision gate on a masonry column off Highway 44 and a heavy steel farm swing gate on a rural Bullitt County property where the posts are driven pipe that’s been leaning for a decade. That local knowledge is why homeowners keep calling us back, and why a live person, not a voicemail, answers our phone around the clock. Every Shepherdsville install carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and fix it. That’s the whole promise, plain and simple.
Our Gate Installation Services in Shepherdsville
Driveway Gate Installation
A driveway gate in Shepherdsville is doing two jobs at once: holding a heavy panel through Kentucky wind and soaking up repeated freeze-thaw cycles at the post base. We pour footings below frost line and set posts with room for the clay to do what it does. Whether you want ornamental aluminum on a masonry column or a welded steel frame across a farm entrance, we build for the ground you’re actually on, not a generic depth that works in Arizona.

Sliding Gate Installation
Sliding gates make a lot of sense in Shepherdsville’s newer subdivisions, where driveways run straight off Cedar Grove Road or roll slightly uphill toward the house. A slide gate doesn’t swing out into traffic or pile snow in winter. The catch is our soil: grit from Salt River flood events works its way into roller tracks and chews up rack and pinion teeth if the track isn’t bedded and sealed right. We set tracks on compacted base and specify rollers that shed debris instead of collecting it.

Swing Gate Installation
Swing gates are still the standard for older Bullitt County properties and the wide farm entrances you see off Highway 1020 and beyond. The post on the hinge side takes all the abuse. In Shepherdsville, that post is sitting in clay that heaves every winter. We set swing gate posts deeper, brace the hinge side, and weld the leaf true so the operator isn’t fighting a misaligned frame from day one.

Pedestrian Gate Installation
A pedestrian gate beside a driveway gate gives you daily access without cycling the operator every time the kids walk out for the school bus or you run the trash to the curb. We build them to match the driveway gate and anchor them the same way: properly set, properly welded, and integrated so the latch and strike plate don’t bind when the ground shifts.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Shepherdsville
We’re certified to work on nine major gate brands, including Linear and LiftMaster operators, which is what we most often install on Shepherdsville homes. We also regularly service Viking, Ghost Controls, and DoorKing openers. If you have a brand preference or you’re replacing an existing operator, tell us what failed and we’ll match a new unit to the gate’s weight, width, and wind exposure rather than selling you whatever’s left on the truck. Our shop stocks the parts these brands need, so a Shepherdsville repair doesn’t wait a week on a parcel from across the country.
Common Gate Installation Problems We See in Shepherdsville Homes
- Post footings heaving out of plumb. Bullitt County clay expands when it freezes and the whole post moves. Each February and March we see swing gates that won’t close because a post has shifted enough to bind the hinge side.
- Slide gates sagging after flood grit works into the track. Salt River water doesn’t just knock gates around; it carries silt and sand that grinds rollers and bends rack teeth. We see slide gates on commercial properties near the I-65 distribution warehouses take the worst of it.
- Operators shorting out after standing water. Low-lying properties along the floodplain hold water around control boxes and photocells. If the box is mounted too low or the seal is cracked, the board fails. We mount controls higher and seal every penetration.
- Farm-style swing gates on driven posts that predate the subdivision boom. Older Bullitt County properties still run heavy steel gates on wood or pipe posts. Those posts rot or bend, and the gate drags. We convert those to concrete footings and weld reinforcement plates on site.
Pricing for Gate Installation in Shepherdsville, KY
We quote every Shepherdsville gate installation as a fixed price, agreed in writing before the first thing comes off the trailer. Here’s what to expect in this market:
- Heavy steel driveway gate, single swing or slide, installed with welded frame and standard operator: $1,900-$4,200.
- Ornamental aluminum driveway gate with masonry column mounting: $3,800-$5,900.
- Double gate, swing or slide, with matched operators and safety edges: $5,200-$7,800.
- Pedestrian gate, steel or aluminum, matching existing fence line: $750-$1,400.
- Replacement post footing set deeper with additional rebar, including demo of the old footing: $500-$1,100.
What moves the price is post depth, operator type, panel material, and whether the gate opens onto a slope that needs a cantilever roller system. We don’t charge a trip fee inside the county, we offer a free second opinion on any written estimate, and seniors and veterans get 10% off permanently. Call (877) 610-2993 and Hal or one of his crew will walk the site and hand you a number.
We Also Serve Cities Near Shepherdsville
While this page is about Gate Installation in Shepherdsville, our crew regularly works the surrounding Bullitt and southern Jefferson county area. That includes Hillview, Fairdale, Mount Washington, and Okolona. If you’re down the road and your gate is leaning after the last thaw, the same Gate Installation crew that works Shepherdsville will come to you.
Serving Shepherdsville, KY - Our Local Coverage Area
We’re based in the Shepherdsville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Shepherdsville
We start at 36 inches and go deeper, often 42 to 48 inches, depending on the post size and gate weight. Bullitt County clay swells when saturated, so we also widen the footing footprint and add rebar cages. A shallow footing will heave by February. Call (877) 610-2993 and we’ll tell you exactly what your soil and gate need after a free site look.
Everything below gate level gets sealed and everything electrical gets mounted high. We raise control boxes above historical flood line, use weatherproof enclosures with sealed conduit, and specify rollers and hinge hardware built for wet conditions. We also spread the base for slide tracks so water drains instead of pooling under the rollers.
Yes. A cantilever slide gate works well on sloped driveways because it rides its own track rather than scraping the ground. We build these for homes off Cedar Grove Road and other 2000s-2010s subdivisions where the drive runs gently uphill and a swing gate would fight the grade.
A battery-backup capable operator, often a LiftMaster or Linear, with a solid top rail and wind-rated hinges. Shepherdsville gets real wind off the open floodplain, and a solid infill gate catches it like a sail. We also show every customer the manual release procedure: pull the release lever to disconnect the operator, then move the gate by hand, and remember to re-engage the lever once power returns rather than letting the gate swing free on a windy night. If your power dips frequently, call (877) 610-2993 and we’ll spec an operator that doesn’t leave you locked out.
Yes. Solar gate openers work well for rural Bullitt County properties where running conduit from the house to the gate would mean trenching across a pasture. We install Ghost Controls and Viking solar-compatible operators with proper panel sizing for Kentucky’s winter sun. The operator, panel, and battery all get mounted on a stable post set below frost line so the system stays aligned through the thaw. Call us at (877) 610-2993 for a straight answer on whether your property gets enough sun year-round.
Call for a Free Gate Installation Estimate in Shepherdsville
You’ll get a live person on the line at (877) 610-2993, not a phone tree. We’ll schedule a free site measure, walk the ground with you, and hand you a fixed written price before any work starts. Hal Gatewood has been at this since 2001, his name is on the shop, and the 90-Day Done Right Promise is stamped on every job. If you want a gate that stays straight through Shepherdville’s next February thaw, call today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Shepherdsville and Bullitt County since 2001.





Before
After
Before
After
Before
After