Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across San Bernardino
A new driveway gate in San Bernardino typically runs $2,800 to $7,500 installed, depending on whether you need a single swing gate, a sliding gate, or a double gate with automation. Turnaround on most installations is 2 to 4 weeks from the day we measure, and you’ll have a written price before any work starts. Gatewood Fence & Gate has been doing this work since 2001, and our Gate Installation crew serves the whole city, from Verdemont down to Loma Linda’s edge. Call us at (877) 610-2993 and you’ll get a live person, not a menu system.
Why Gatewood Fence & Gate Is San Bernardino’s Preferred Gate Installation Company
San Bernardino homeowners have been calling Hal Gatewood since long before the big national outfits started answering the phone from somewhere else. The name is on the shop, and the shop is down the road, that’s the oldest accountability there is. Our crews work these neighborhoods every week. We know what a 105°F afternoon in the 92411 ZIP does to a steel gate frame, and we know which streets catch the worst of the Cajon Pass gusts when the Santa Anas kick up in October.
We’re not passing through. We carry parts for the gates already installed across this city, not just the shiny new stuff in the catalog. And when Hal says he’ll show up Tuesday between 9 and noon, that’s when the truck pulls up. No dispatch queue, no voicemail runaround, just the person who does the work answering the phone. Every installation carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back, no argument, no fine print.
We’re also the crew other companies call when they find a gate they don’t want to touch. That happens a lot in San Bernardino. Decades of deferred maintenance across the city mean a simple gate replacement often turns into a footing repair, a hinge rebuild, and a track realignment before the new panel ever goes on. We plan for that. We quote it up front. You’ll know the price before we cut a single bolt.
Our Gate Installation Services in San Bernardino
Driveway Gate Installation
A driveway gate in San Bernardino has to hold up to wind loads most California cities never see. We build for that from the start. Our driveway gate installs use reinforced post footings sized for Cajon Pass exposure, stainless steel fixings as standard, and hinge points that won’t tear out of the concrete when a gust hits at 60 mph. Whether you’re on a quarter-acre lot in the 92410 ZIP or running a small horse property on the north side, we measure, fabricate, and install to the actual conditions on your street, not a one-size spec.
Pedestrian Gate Installation
Pedestrian gates get abused in ways driveway gates don’t. Kids swing on them, delivery drivers shove their carts through them, and the sun bakes the hinges all summer. We install pedestrian gates in San Bernardino with self-closing hinges rated for daily use, powder coating designed to survive the inland UV, and latches that won’t freeze up after a year. If you need a matching pedestrian gate next to a new driveway gate, we fabricate both at the same time so the finish and hardware match.
Sliding Gate Installation
Sliding gates are the right call for a lot of San Bernardino driveways, especially where a slope or a short setback makes a swing gate impossible. The challenge here is the track. Santa Ana winds pack dust and debris into slide tracks, and summer heat shifts everything by a sixteenth of an inch. We set sliding gate tracks with extra clearance for thermal expansion, use cantilever hardware where the site allows, and spec operators that can push the gate through accumulated grit without burning out the motor. Hal will tell you straight if a sliding gate makes sense for your driveway, and he’ll tell you straight if a swing gate is the better call.
Swing Gate Installation
Swing gates are the classic San Bernardino look, especially in the post-war tract neighborhoods around 92404 and 92405 where the original wrought-iron panels still hang on half the blocks. We install both single and double swing gates with post footings poured below the freeze line and jamb hardware rated for the wind loads this city actually experiences. A swing gate done wrong will sag in the first year. A swing gate done right, with the right post mass and hinge spec, will still be square and true five years later.
Double Gate Installation
Double gates need both leaves to meet dead center and latch under load, and they need the automation synced so one leaf doesn’t slam when the other is still moving. We see a lot of double gates in San Bernardino on corner lots where the driveway is wide enough for two cars side by side. Our double gate installs include matched operators programmed with proper delay settings, a center drop rod or latch assembly that holds under wind, and hinges sized for the total gate weight, not just half of it.
Security Gate Installation
A security gate in San Bernardino isn’t decoration. It’s the difference between a driveway that’s open to anyone off Del Rosa Avenue and one that makes a thief pick a different block. We install security gates with keypad entry, intercoms, and safety edges that meet current UL 325 requirements for entrapment protection on automated systems. That matters on older homes here, because a lot of them never had any.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Bernardino
We install and service gates with operators from FAAC, BFT, Linear, and Viking, among others. That’s not a random list, it’s the hardware we see failing in San Bernardino driveways every week. When a FAAC operator from 2009 gives up after fourteen years of Cajon Pass wind abuse, we don’t tell you to rip out the whole system. We replace the operator, keep the gate if it’s solid, and you’re back to working for a fraction of the cost of a full rebuild. That’s the repair-first philosophy that keeps people calling. We stock common parts and boards locally, so you’re not waiting a week for a component to ship from a warehouse in Texas.
Common Gate Installation Problems We See in San Bernardino Homes
On a 1950s tract home off Kendall Drive in the 92404 ZIP, our crew replaced a wind-snapped wrought-iron swing gate whose original hinge post had cracked at its concrete footing after decades of freeze-thaw cycling. The old gate operator arm was bent beyond repair from a Cajon Pass gust, so we installed a new LiftMaster swing gate operator with reinforced post footings and stainless fixings rated for high-wind exposure. We also added a safety photocell and keypad entry to meet current UL 325 entrapment protection, since the original system had none. That job is San Bernardino in one driveway.
Here’s what we find across the city:
- Wind-torn hinge points. Santa Ana winds straight out of the Cajon Pass don’t just push gates open, they lift them off their hinges. Lag bolts tear out of spalled concrete footings, and the gate ends up on the ground or in the street. The fix isn’t a new gate. It’s new footings with proper embedment and stainless hardware that holds.
- Thermal expansion failure. When it’s 106°F in the 92408 ZIP, steel gate frames grow. Set screws back out, slide tracks shift, and what worked in March binds up by August. Gates installed without thermal allowance fail on a schedule, every summer, until someone builds them right.
- UV-degraded coatings. San Bernardino sun kills paint and powder coating faster than people expect. Once the coating fails, surface rust starts, and it doesn’t stop at the surface, it travels into the welds and pivot points. We see gates that look fine from the street and are structurally gone at the hinge line.
- Obsolete operators on older homes. The city’s older housing stock is full of automated openers that manufacturers haven’t supported in a decade. When they fail, there’s no simple part swap. We replace them with current models wired for safety edges and photocells, because a gate that closes on its own without entrapment protection is a liability, not a feature.
Pricing for Gate Installation in San Bernardino, CA
Here’s what you can expect to pay in San Bernardino for common gate installs:
- Pedestrian gate, steel or aluminum, no automation: $800-$1,600
- Single swing driveway gate, no automation: $1,800-$3,200
- Single swing driveway gate with automation and keypad: $3,200-$5,500
- Double swing gate with automation, keypad, and photocells: $4,800-$8,500
- Sliding gate with automation and safety edges: $4,200-$7,500
What moves these numbers? Post footing replacement, obstacle detection requirements, the gate material you choose, and whether we’re working around an old gate that needs removal and disposal. You’ll get your price in writing before we start, and that’s the price you pay. No trip charge inside the county, and seniors and veterans always get 10% off. Call (877) 610-2993 for a free estimate, Hal will come out, measure, and tell you what the job actually needs.
We Also Serve Cities Near San Bernardino
Our crews work the whole San Bernardino area. If you’re up the 215 in Muscoy, across the line in Highland, down toward Loma Linda, or over in Rialto, we’ll come out the same way we do anywhere else: measured, written price, done right. If you’re looking for Gate Installation in San Bernardino or any of the surrounding communities, call (877) 610-2993 and we’ll get you scheduled.
Serving San Bernardino, CA - Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in San Bernardino
They fail faster because San Bernardino sits directly in the wind shadow of the Cajon Pass. Operator arms and internal gears take repeated stress loads during Santa Ana wind events that coastal cities simply don’t experience. Add 105°F summer heat that accelerates wear on circuit boards and capacitors, and you get shorter lifespans here. Operators specified for mild climates don’t last in San Bernardino. Call (877) 610-2993 and we’ll match the operator to your actual wind and heat exposure.
Twice a year, minimum. The Verdemont corridor gets the dual hit: Cajon Pass wind events that twist and lift gate panels off their posts, plus wildfire season ash that packs into automated track channels and grinds down rollers. We recommend a spring check before the heat hits and a fall check before the winds start. The 90-Day Done Right Promise covers our work, but catching a failing hinge before it tears out of the footing saves you a much bigger repair. Call (877) 610-2993 to schedule a check.
No. A gate sags in the hinge post, not in the middle, and in San Bernardino that hinge post has probably been through decades of freeze-thaw cracking and wind loading. If you swap the panel and leave the post, you’ll fix it twice. We start at the post, check the footing, rebuild the hinge point if needed, and then hang the new panel. That’s the repair-first way, and it’s why our gates stay square. Call (877) 610-2993 and Hal will tell you what’s actually wrong before quoting anything.
Yes. UL 325 requires entrapment protection on all automated gates, regardless of the home’s age. Many older San Bernardino homes from the 1950s through 1970s have automated gates with no photocells, no safety edges, and no reverse sensors. That’s dangerous. When we install or upgrade a gate here, we bring the system up to current UL 325 standards whether or not anyone is making you. Call (877) 610-2993 if you’re not sure your gate is compliant.
Powder-coated steel with stainless steel hardware holds up best here. Galvanized steel frames with a quality powder coat survive the UV and resist the rust that travels into welds on cheap painted gates. Aluminum is lighter and won’t rust, but it bends under wind loads that steel shrugs off. For most San Bernardino properties in the 92404 through 92412 ZIP codes, a steel frame with stainless fixings is the right spec. We’ll tell you if your site leans different. Call (877) 610-2993 for a straight answer on material.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving San Bernardino since 2001.