Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Sacramento
A new driveway or pedestrian gate in Sacramento typically runs $1,800 to $7,500 installed, depending on whether you need a single swing panel, a sliding gate on a track, or a full double gate with an operator. We quote the job in writing before any work starts, and the person who shows up is the same person whose name is on the invoice. If you’re in Midtown, Land Park, East Sacramento, or anywhere else in the 94248 through 94252 ZIP codes and you want a gate that won’t sag in two seasons, call Hal at (877) 610-2993.
We’ve been installing and repairing gates in Sacramento long enough to know exactly what the city’s trees, heat, and fog do to a gate over time. That local knowledge changes how we set every post and wire every operator.
Why Gatewood Fence & Gate Is Sacramento’s Preferred Gate Installation Company
We are not a franchise and we don’t run jobs out of a call center three states away. Hal Gatewood founded Gatewood Fence & Gate in 2001, and he still answers the phone himself. A live person picks up 24 hours a day, seven days a week. You call, you get Hal or one of his crew, not a voicemail tree.
Sacramento homeowners see the difference quickly. We show up in the window we promised, we carry a crew that is background-checked and uniformed, and we keep a published address and license number that anyone can look up. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Every installation carries our 90-Day Done Right Promise in writing. If a post settles, a weld cracks, or an operator acts up within 90 days, call us. Hal comes back and makes it right. One call brings him back, no runaround.
Our Gate Installation Services in Sacramento
Most Sacramento lots are tight. That’s the governing reality here. Shared driveways, narrow side yards, and century-old easements mean the gate has to work with the space you actually have, not the space a catalog assumes. Here are the four most common installations we build in Gate Installation for Sacramento homes.
Driveway Gate
A driveway gate in Sacramento usually has to do double duty: it keeps the driveway secured while still letting two cars pass on a schedule that doesn’t leave one of them waiting on the street. We measure the actual opening, check the swing radius against mature street trees, and set posts below the root zone where we can. On a typical single driveway gate, you’re looking at $2,200 to $5,800 depending on material and whether you want an automatic opener.
Pedestrian Gate
Pedestrian gates are the workhorses of older Sacramento neighborhoods. Midtown-adjacent Craftsman bungalows and Victorian-era homes often have a narrow side gate that opens onto a path shared with a neighbor. We build these to swing on heavy-duty hinges with sealed bearing posts, and we size the post depth for Sacramento’s clay soil, which swells when the winter fog saturates it and cracks when the summer heat dries it out. Most pedestrian gate installs run $900 to $2,600.
Sliding Gate
If you have a narrow lot where a swinging gate would block the sidewalk or the neighbor’s driveway, a sliding gate is the answer. Sliding gates sit on a steel track mounted to a concrete footing, with a cantilever option if the ground is too uneven for a track. Sacramento’s sustained 105°F heat expands metal panels enough to throw off rack-and-pinion alignment within the first season unless the track is laid with expansion gaps. We account for that from day one. Sliding gate installs typically run $3,800 to $9,500 including an operator.
Swing Gate
Double swing gates look right on Sacramento’s older homes, especially the ornamental wrought iron styles around Land Park and the Fab Forties. But a double gate is only as good as its hinge posts. We hand-dig posts around root systems where we can, pour deeper piers with rebar, and set the panels true before the operator ever goes on. If you want one, expect $3,200 to $8,000 for a double swing installation depending on panel material and automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sacramento
We’re certified to install and service gate operators from nine major brands, including Ghost Controls, Viking, DoorKing, and Elite. That matters in Sacramento because many operators are spec’d for coastal cities that never see 108°F days. We stock parts locally for all of them, so when your Viking operator burns out a capacitor in August, we’re not waiting on a shipment from Dallas. If you already have a brand you trust, we’ll work with it. If you don’t, we’ll steer you toward what holds up in Central Valley heat.
Common Gate Installation Problems We See in Sacramento Homes
Most gate failures we walk into on Sacramento properties trace back to one of three causes. Here’s what we find and what it means for your gate.
- Root heave from mature street trees. Sacramento’s urban canopy is one of the largest in the nation, and the valley oaks, elms, and Chinese pistaches that make the city beautiful also push post footings out of level. Along narrow shared driveway easements in central neighborhoods, a post that tilts even two degrees will cause the latch to bind and the panels to sag.
- Thermal expansion from summer heat. Sustained stretches above 100°F cause metal gate panels to grow measurably. Rack-and-pinion sliding gates are especially sensitive; what bolted up square in May can be binding by July if the installer didn’t leave room for expansion.
- Tule fog corrosion on unsealed hardware. From November through February, Sacramento’s dense ground fog saturates hinges, springs, and low-voltage keypad wiring. We see gates that ran fine all dry summer suddenly short out after weeks of fog. We seal every conduit and use stainless hardware where it counts.
Pricing for Gate Installation in Sacramento, CA
Honest numbers: pedestrian gates run $900 to $2,600, single driveway gates $2,200 to $5,800, double swing gates $3,200 to $8,000, and sliding gates $3,800 to $9,500 with an operator. What moves the price within those ranges is material choice, automation, and what we find when we dig. Sacramento’s clay soil and root networks mean we sometimes hit conditions that require a deeper pier or a different footing design than the original estimate assumed. When that happens, we stop and tell you before proceeding. The price is quoted and agreed before any work starts, standing offers apply ($40 off any repair over $200, no trip charge inside the county, 10% permanent discount for seniors and veterans), and a free second opinion on any written estimate is always available. Call (877) 610-2993 for an exact quote on your property. Estimates are free.
We Also Serve Cities Near Sacramento
Along with covering Sacramento proper, our crews regularly install gates in West Sacramento, Fruitridge Pocket, Arden-Arcade, and La Riviera. If you own property in one of those areas and want a local installer who knows the tree and soil conditions along the American River corridor, we can help. Dispatch and scheduling are coordinated from our Sacramento office, so response is quick.
Serving Sacramento, CA - Our Local Coverage Area
We’re based in the Sacramento area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Sacramento
Yes, and this is one of the most common requests we get in central Sacramento neighborhoods where driveways are tight and sidewalks are close. Sliding gates don’t require the swing radius a double gate needs. We’ll measure the actual opening, pour a track or cantilever footing, and size the panels so they clear the property line. Call (877) 610-2993 and we’ll come measure for free.
Roots from mature valley oaks and elms push post footings out of level over time, a failure pattern we see constantly in East Sacramento, Land Park, and the older central housing stock. We hand-dig around roots where possible rather than cutting them, then pour deeper piers with rebar so the post has a stable base below the root zone. Getting this right at installation is the difference between a gate that lasts decades and one that sags in three years.
Yes. Any automatic gate in Sacramento must have entrapment protection in the form of photo-eye sensors, safety edges, or both, depending on the gate type and stroke. We install these as standard on every automated gate, and we test them before the job is done. A gate that doesn’t reverse when a child or dog crosses its path is a gate we won’t leave running.
The Central Valley’s winter fog saturates anything unsealed, including low-voltage keypad wiring and hinge hardware. Operators installed without sealed conduit and weather-tight connections start glitching after a few good fogs. We use sealed conduit, dielectric grease on all low-voltage connections, and stainless hinge hardware on every Sacramento install. It’s not optional here.
Yes, and this is exactly the kind of repair-first work we prefer. We dig out the old footing, remove the rotted or cracked post, pour a new pier, and remount the existing ornamental iron panels. You keep your original gate, which on a 1920s Craftsman or Victorian is usually irreplaceable, and you pay a fraction of a full replacement. Call (877) 610-2993 for a free estimate on the post only – no requirement to rebuild the whole thing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Sacramento since 2001.