Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Redwood Shores
Gate installation in Redwood Shores costs $2,400-$7,800 for a standard single driveway gate with a motorized opener, and most installations take one to two days on site. That’s the honest range for this community, where bay mud and salt air dictate what actually works instead of what looks good in a catalog. If your gate is dragging, sagging, or the posts have wandered out of plumb, call (877) 610-2993 and a live person answers. Hal Gatewood has been doing this since 2001, and the name’s on the shop.
Why Gatewood Fence & Gate Is Redwood Shores’s Preferred Gate Installation Company
We work in Redwood Shores every week, and we’ve learned its quirks the hard way, by fixing the mistakes of companies that treated it like inland work. The bay mud under most of this community compresses unevenly, which means gate posts shift gradually even when the hardware is still sound. We check post plumb before we touch anything else, because in Redwood Shores that’s usually where the problem starts. That diagnostic habit alone saves our customers money and keeps us from replacing parts that weren’t the issue.
Our Redwood Shores customers keep our phone ringing because we show up when we say we will, we answer calls around the clock with a live person, and we put the 90-Day Done Right Promise in writing on every job, not buried in fine print. We’re locally owned and owner-operated. Hal Gatewood’s address and license number are published for anyone to look up. That matters in a place like Redwood Shores, where people want a face they’ll see again at the Belmont Farmers’ Market, not a call center three states away.
We also service gates from Linear, Viking, and DoorKing, the brands most commonly installed in Redwood Shores HOAs, and we carry the weatherproofing components those brands’ coastal installs actually need. No runaround, no rebranded subcontractor at your door. Just our crew, background-checked and uniformed, on the schedule we gave you.
Our Gate Installation Services in Redwood Shores
Swing Gate
Swing gates are the most common style in Redwood Shores, especially in the single-family subdivisions built off Marine Parkway and along Bridge Parkway. A swing gate puts its entire load on the hinge post, which is exactly the post that bay mud settles first. We like to set replacement posts in deeper concrete footings than the original 1980s construction used, backfill with compacted gravel, and re-hang the gate with stainless hinges and fasteners, because the salt air here will find mild steel within a decade. Your gate should open like a door, not like a grudge.
Sliding Gate
Sliding gates suit the narrower lots and townhome complexes along Redwood Shores Parkway, where swing arcs would block the street or the sidewalk. A sliding gate needs a rigid, level track, and that’s where Redwood Shores throws its curve: bay mud settles unevenly, so a track poured on grade can hump or dip within a few years and bind the rollers. We machine-grade the base, pour the track pad as a reinforced beam rather than a slab, and anchor the end posts with attention to the soil’s load-bearing quirks. The result is a gate that glides, not one that groans.
Security Gate
Security gates in Redwood Shores often need to satisfy HOA covenants while actually performing, and those two goals can clash. A decorative iron security gate with the right coating holds up here; a cheap powder-coat over mild steel will show rust bleeding at the welds within five years. We install security gates with hot-dip galvanized frames where the HOA allows it, or marine-grade paint systems where they don’t. We also integrate access control: keypads, intercoms, and vehicle sensors. Your security gate should open for family and keep out everyone else, and it shouldn’t look like a battleship unless you want it to.
Pedestrian Gate
Pedestrian gates flank the driveways of most Redwood Shores properties, and they take the same salt air beating as the main gate while carrying less structural redundancy. A pedestrian gate post that’s tilted or rusted at the base is a security hole and a lawsuit waiting for a child’s fingers. We replace pedestriangate posts with galvanized or stainless options sized for longevity, not just code minimums, and we set them so the gate latches firmly against the positive stop. Your pedestrian gate should not sag, should not screech, and should not require a hip check to close.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redwood Shores
We service, install, and repair automatic operators from Linear, Viking, Ghost Controls, and DoorKing, the brands you’re most likely to find on Redwood Shores gates because they’ve been specified in local HOA documents for decades. We keep stock of weatherproof housing gaskets, marine-grade wire nuts, and stainless mounting hardware for these brands, so a board replacement or gear swap doesn’t turn into a two-week parts wait. If your operator is older and the manufacturer’s parts are scarce, we’ll tell you straight which brands have local service support and which are becoming orphans. And if repair makes more sense than replacement, that’s what we’ll do. Hal founded this business on repairing what other companies want to replace, and that hasn’t changed.
Common Gate Installation Problems We See in Redwood Shores Homes
- Hinge posts corroding at the base. Salt-laden marine air attacks mild-steel hinge posts where they meet the concrete, causing seizing or snapping within 8-12 years. We replace them with galvanized or stainless posts and seal the base with a proper post cap.
- Gate dragging on the latch side. This is usually not a hinge failure in Redwood Shores; it’s the post itself migrating as bay mud compresses unevenly underneath it. We check plumb first, then reset the post in a deeper footing before we ever touch the gate leaf.
- Operator board failures from marine moisture. Automatic gate motor housings trap salt-laden humidity, corroding control boards and terminals faster than inland schedules predict. We weatherproof the housing, replace the board with a sealed unit where possible, and add desiccant packs and marine-grade connectors where they’re warranted.
- Gates out of alignment with their HOA’s approved style. Redwood Shores HOAs often require replacement hardware and operators to match the community’s aesthetic and approved material list. We read the HOA docs before we quote, so you don’t buy a gate the board will make you remove.
On a townhome off Bridge Parkway, we found a double swing gate dragging on the latch side. The hinge post was 2 inches out of plumb from bay mud subsidence. We reset the post in a deeper concrete footing, re-hung the gate with stainless hinges, and added a LiftMaster operator with new safety photocells. The gate swings like it should now, and the HOA approved the materials before we poured the first bag of concrete.
Pricing for Gate Installation in Redwood Shores, CA
Here’s the truth about what gate installation costs in Redwood Shores. A single swing driveway gate with a basic automatic operator runs $2,400-$4,200. A sliding gate on a reinforced track pad runs $3,800-$6,500, the added cost coming from the base work this soil demands. A security gate with access control, intercom, and vehicle sensors runs $5,500-$7,800. These ranges assume standard widths and no major post replacement, but Redwood Shores rarely gives you standard conditions. If your posts have migrated, add $600-$1,200 for resetting the worst one in a deeper footing. If your HOA requires specific coatings or materials, that changes the number too. You’ll get a written, itemized price before any work starts, and that price is what you pay. Not a penny more at the door. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Redwood Shores
Our Gate Installation team covers Redwood Shores and the surrounding Peninsula communities. If you’re in Foster City, Belmont, San Carlos, or San Mateo, you’ll get the same owner-operated service, the same 90-Day Done Right Promise, and the same live person answering your call at 2 a.m. or 2 p.m. We work throughout Redwood Shores and know the soil and salt air patterns block by block.
Serving Redwood Shores, CA - Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Redwood Shores
Because Redwood Shores is built on reclaimed bay mud that compresses unevenly over time. The soil settles differently under each post, tilting one out of plumb while the other stays put. This is not a hardware problem; it’s a soils problem, and it means post plumb checks are the standard first diagnostic step in this community.
We reset the offending post in a deeper, wider concrete footing and re-hang the gate, which addresses the root cause instead of shimming a gate leaf and pretending the problem is gone. Call (877) 610-2993 and we’ll come look at your posts before you spend money on hardware you don’t need.
Hot-dip galvanized steel, hands down. The zinc coating sacrifices itself to the salt air instead of your gate frame, and it lasts 20-30 years here compared to 5-10 for painted mild steel. Where galvanizing isn’t allowed by HOA aesthetic rules, a proper marine-grade epoxy paint system over blasted steel is the next best thing. Avoid powder coat alone; it chips and then traps salt moisture against the steel underneath. We recommend galvanized frames with the HOA-required topcoat or stainless hinges and fasteners throughout.
Yes, and this one catches a lot of homeowners off guard. The persistent marine humidity and salt aerosols around the lagoons corrode operator housings, control boards, and terminal connections faster than the manufacturer’s standard maintenance schedule assumes. We add sealed housings, marine-grade wire connectors, and desiccant packs on every Redwood Shores install, and we recommend a visual inspection of the weatherproofing twice a year. A little prevention here beats a $900 control board.
It decides how deep and how wide your post footings need to be. Standard footing depths that work in Belmont or San Carlos will let posts migrate here within a few years, because the bay mud compresses and settles unevenly. We pour deeper, reinforced footings, often with a gravel base, to spread the load and keep the post stable for decades instead of seasons. This costs a bit more upfront, but it’s the difference between a gate that works and a gate that drags.
We’ll show you what your soil needs and give you a written price before we start. Call (877) 610-2993 and we’ll come measure.
Yes, and this is standard practice for us in Redwood Shores, where nearly every home is part of an HOA-governed planned community. We read the covenants and the approved materials list before we quote, and we build or order gates that match the community’s specified style, coating, and hardware. You get a gate that looks like it belongs on your street and satisfies the board, without the runaround of trying to interpret architectural guidelines yourself.
Send us your HOA documents and we’ll tell you what’s feasible and what it costs. Call (877) 610-2993.
Call Gatewood Fence & Gate for Gate Installation in Redwood Shores
If your gate is dragging, your posts are tilting, or you’re just tired of fighting a gate that should open itself, call (877) 610-2993. A live person answers around the clock, and we’ll schedule a time that works, show up when we promised, and give you a written price before any work begins. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal Gatewood back to make it right, no runaround. You can also drive to the shop and look him in the eye; the address is published, the license number is public, and the name’s been on the door since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Redwood Shores and the San Francisco Bay Area since 2001.