Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Redmond
Gate installation in Redmond usually falls into one of two camps: replacing a builder-grade operator from the mid-2000s that has finally quit, or adding automation to a gate that has been manual since the day it was hung. Either way, you want a crew that shows up on time, quotes a number before the first tool comes off the truck, and stands behind the work. We’ve been doing exactly that since 2001. If you need a driveway gate, pedestrian gate, or a full security gate put in around Redmond, call (877) 610-2993 and you’ll get a live person, not a voicemail.
Why Gatewood Fence & Gate Is Redmond’s Preferred Gate Installation Company
Hal Gatewood started this company in 2001 and never made it bigger than it needs to be. The name is on the shop, the address is published, and the license number is something you can look up yourself. When you call about Gate Installation in Redmond, the person who answers is the person who will be on your driveway. That matters to homeowners who have already been quoted one price on the phone by a big outfit and charged another when the tech showed up at the door.
We work across all three Redmond ZIP codes, 98052, 98053, and 98073, and we know the difference between a 1970s rambler off Avondale Road and a 2004 HOA community up on Redmond Ridge. The gate hardware is different, the soil is different, and the way the gate was originally wired is different. You want a company that knows which one you have before the ladder comes off the rack.
Every job, from a simple swing gate replacement to a full slide gate operator retrofit, carries the 90-Day Done Right Promise in writing. If it isn’t right, one call brings Hal back. No runaround, no fine print. That’s it.
Our Redmond customers also get a free second opinion on any written estimate from another company. Bring us the paperwork and we’ll tell you straight whether the work is needed, whether the price is fair, and whether there’s a cheaper repair that gets you the same result. Half the time, there is.
Our Gate Installation Services in Redmond
Driveway Gate Installation
A driveway gate in Redmond does more than keep cars out. It’s the first thing you see when you come home, and it sets the tone for the whole property. We install steel, aluminum, and ornamental iron driveway gates sized to your opening, and we make sure the post footings go deep enough for Redmond’s expansive clay soil. A footing poured too shallow will heave within a few wet seasons, and then the gate binds at the latch and the sensors trip for no reason. We pour it right the first time. Typical driveway gate installation in Redmond runs $2,800 to $7,500 depending on gate width, material, and whether automation is included.
Pedestrian Gate Installation
Pedestrian gates in Redmond’s older 98052 neighborhoods are often ornamental iron pieces added as retrofits in the 1980s and 1990s. Some are beautiful and some are rusted through at the hinge welds. We install new pedestrian gates that match your existing fencing, with hardware sized for our wet winters. If the gate will be automated, we run the power and low-voltage cabling at the same time so you don’t end up with conduit strapped across your walkway later. Pedestrian gate installation typically runs $900 to $2,400 in Redmond, including the gate, posts, and standard latch hardware.
Sliding Gate Installation
Sliding gates are common on Redmond’s larger lots and on HOA community entries, especially up in 98053. They save space on shorter driveways and handle heavier gates better than swing hardware. We install cantilever and V-track slide gates, and we pay close attention to the track bed. Redmond’s clay soil moves, which means a track poured without proper gravel base and drainage will sink or hump within two years. A new sliding gate with operator runs $4,200 to $11,000 in Redmond, depending on gate length, weight, and operator brand.
Swing Gate Installation
Swing gates are still the most common residential gate in Redmond’s 98052 core, where driveways are shorter and sightlines are tighter. We install single and double swing gates with in-ground or post-mounted operators. The hinge post is where everything lives or dies. We set posts deeper than code minimums and use concrete with a slower cure so the post doesn’t shift before the gate even goes on. When a swing gate sags, it sags at the hinge post, not in the middle of the panel. That’s where we start. Swing gate installation in Redmond typically runs $2,600 to $6,800 for a single gate, more for a double.
Security Gate Installation
Redmond’s tech-heavy homeowner base means plenty of people want their gate tied into a smart home system. We install security gates with keypad, intercom, and phone-app access, integrated with myQ, HomeLink, or a standalone controller depending on what already runs the house. We’ll also add vehicle detection loops, safety edges, and photo eyes wired to code. A full security gate package in Redmond, including gate, operator, access keypad, and safety system, usually lands between $5,500 and $15,000 depending on scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redmond
We’re certified to service nine major gate operator brands, and for Redmond’s wet climate and clay soil, we lean on three the most: DoorKing for heavy slide gates and HOA entries, LiftMaster for residential swing and slide gates tied into smart home systems, and Viking for commercial-duty operators that take abuse and keep working. We stock common parts for these brands locally, which means a broken limit switch or a seized gear doesn’t mean waiting two weeks for a part to ship from a warehouse in Ohio. If we can’t fix it, we replace it and haul the old one away. Simple.
Common Gate Installation Problems We See in Redmond Homes
- Builder-grade operators from the early 2000s failing all at once. Redmond Ridge’s HOA communities in 98053 got their DoorKing and LiftMaster slide gate operators installed in roughly the same 2002 to 2007 window. Those units are 15 to 25 years old now, and they’re dying on the same schedule. When one fails, three more are usually right behind it.
- Clay soil heaving the gate posts. Redmond’s soils swell when wet and shrink when dry. Over a few seasons, that movement pushes concrete footings out of level, which throws the hinges and latch alignment out of spec. A gate that bound only after rain is almost always a post problem, not a hinge problem.
- Rust and rot from persistent moisture. Redmond gets more rain than Seattle proper, and it lingers from October through May. Steel gate frames rust at the bottom rail, wooden inserts rot, and moss grows on shaded gates, adding weight that trips the safety photocells. We see this on gates that look fine from a car window.
- Missing conduit from the original build. Plenty of Redmond homes had a manual gate installed with no thought to future automation. No power run, no low-voltage line, no safety edge wiring. We trench and run conduit to code, or use solar operators with battery backup where trenching across a finished driveway isn’t practical.
Pricing for Gate Installation in Redmond, WA
Here’s what you can expect to pay for gate installation in Redmond. A basic single swing gate with a post-mounted operator runs $2,600 to $4,500. A double swing driveway gate with automation lands between $5,000 and $9,500. Sliding gates for wider openings start around $4,200 and go up to $11,000 for a heavy cantilever with a DoorKing or Viking operator. Pedestrian gates are $900 to $2,400 installed. Security gates with full access control run $5,500 to $15,000.
What moves the price: gate width, gate weight, whether we’re welding on site or using a prefabricated panel, the operator brand, how far the power run is from your panel, and whether the existing posts can be reused. We give you a written quote before any work starts, and that number does not change at the door. You’ll also get $40 off any repair over $200, no trip charge inside King County, and a permanent 10% discount if you’re a senior or a veteran. Call (877) 610-2993 for a free estimate. It takes about 20 minutes on site, and you don’t owe us anything until you sign the quote.
We Also Serve Cities Near Redmond
Gatewood Fence & Gate works all around Redmond and the surrounding eastside. We regularly run jobs in Union Hill-Novelty Hill, West Lake Sammamish, Sammamish, and Kirkland. If you’re just outside Redmond, call anyway. If you’re inside King County, there’s no trip charge, and we’ll tell you straight whether we cover your street. Dispatch and scheduling are coordinated from our Seattle office, and our crews serve Redmond locally, so you’re never waiting on a truck from another county.
Serving Redmond, WA - Our Local Coverage Area
We’re based in the Redmond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Redmond
Because they were all installed at roughly the same time. The Redmond Ridge HOA communities in 98053 were built in the early-to-mid 2000s, and hundreds of automated entry gates went in between 2002 and 2007, mostly DoorKing and LiftMaster slide operators. Those units were never designed to run 20 years, and now they’re hitting simultaneous failure cycles. When one fails, we usually find several neighboring communities with identical hardware on the same curve. Call (877) 610-2993 and we’ll come look at your HOA’s whole corridor, not just the one gate that quit.
Redmond’s clay soil is expanding when it gets wet, which heaves the concrete footings under the posts. The post shifts a fraction of an inch, the hinge moves, and suddenly the latch won’t line up and the gate drags. Fixing the panel without resetting the post means you’ll be fixing it again next wet season. We dig out the footing, reset or replace the post at a depth that gets below the movement zone, and re-hang the gate true. If your gate binds after rain, call (877) 610-2993 and we’ll diagnose it on site.
Yes, and we do it often, especially in Redmond’s older 98052 neighborhoods where ornamental iron gates were put in as retrofits without any thought to automation. We run the power and low-voltage conduit, install the operator, add the safety edges and photo eyes, and tie it into your keypad or smart home system. If trenching across a finished driveway isn’t practical, we can use a solar operator with battery backup. The quote covers everything, so there’s no surprise power run charge after we start.
For residential slide and swing gates, LiftMaster is our default because it integrates cleanly with myQ and most smart home platforms. For heavy HOA slide gates and commercial entries, DoorKing and Viking are the workhorses we trust. All three handle Redmond’s rain better than cheap builder-grade units, and we stock parts for all of them locally, so a repair doesn’t mean waiting on a freight truck. We’ll recommend whichever fits your gate weight and use case, not whichever one has the highest margin.
Yes. Automatic gate operators in Redmond, same as the rest of Washington, have to meet UL 325 entrapment protection standards. That means photo eyes across the gate opening, a sensing edge or obstruction sensor, and in many cases a vehicle detection loop that prevents the gate from closing on a car. We install every automatic gate to code, and we test the safety system in front of you before we leave. If you’re replacing an old operator that never had these features, we’ll bring the install up to current code as part of the job.
Key Takeaways
- Gate installation in Redmond runs $900 for a basic pedestrian gate up to $15,000 for a full security gate with access control.
- Redmond Ridge HOA gate systems are hitting simultaneous failure cycles because they were all installed in the same 2002-2007 window.
- Clay soil heaving and persistent rain are the two biggest local killers of gate posts and hardware in Redmond.
- We quote a fixed price before any work starts, and every job carries the 90-Day Done Right Promise in writing.
- Call (877) 610-2993 any time. A live person answers, not a voicemail.
Call Gatewood Fence & Gate for Gate Installation in Redmond
If you need a gate installed, automated, or pulled out and replaced in Redmond, call (877) 610-2993. You’ll get a live person on the line, a straight answer about what the job needs, and a written quote that won’t change when the truck shows up. We’ve been at this since 2001, the name’s on the shop, and Hal stands behind every gate we hang. If it’s not done right, one call brings him back within 90 days. That’s the promise, in writing, on every job. Free estimates, no trip charge inside King County, and $40 off any repair over $200 if the job turns out to be smaller than you thought.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Redmond and the surrounding eastside since 2001.