Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Port Orchard
Gate installation in Port Orchard costs between $1,850 and $6,400 for most residential jobs, with swing gates on the lower end and powered sliding gates at the top. We build gates that actually hold up to Sinclair Inlet salt air and Kitsap clay soil, the two things that destroy gate hardware faster here than almost anywhere else in the county. Hal Gatewood has been building and fixing gates since 2001, and our crews work throughout 98366 and 98367 every week. Call (877) 610-2993 and you’ll get a live person, not a voicemail.
Why Gatewood Fence & Gate Is Port Orchard’s Preferred Gate Installation Company
We’re not a franchise and we don’t fly a crew in from another county. Hal Gatewood’s name is on the shop, his address is published, and he’s been owner-operated since 2001. When Port Orchard homeowners call us, they talk to someone who actually knows what salt air does to a galvanized hinge. That’s not a marketing line. It’s the reason we spec stainless steel on waterfront jobs and don’t argue when a customer asks why.
The 90-Day Done Right Promise is stamped on every invoice we write in Port Orchard. If something isn’t right, one call brings Hal back. No runaround, no fine print, no “that’s not covered.” We also answer the phone 24 hours a day with a live person. A gate that won’t close at midnight is a security problem, not something to leave for a call center three states away.
We’re background-checked and wear uniforms, but more importantly, the person who shows up at your driveway in East Port Orchard or Parkwood is the same person Hal trained. We stock parts for Viking, Ghost Controls, DoorKing, and Elite, so we’re not waiting on a shipping truck when your opener board fails. Gate Installation work in Port Orchard is not a side gig for us. It’s what we do.
Our Gate Installation Services in Port Orchard
Driveway Gate Installation
A driveway gate in Port Orchard does two jobs at once: it keeps the road out of your yard and it takes a beating from salt air off the inlet. We build driveway gates with marine-grade or stainless hardware from day one, because repainting rust blooms every other summer is not a maintenance plan anyone wants. Most driveway gates in 98367 run $2,800 to $5,900 installed depending on width, automation, and whether we need to set posts in concrete through the clay.
Pedestrian Gate Installation
Pedestrian gates get overlooked until the latch stops catching and the gate slams every time the wind comes up Sinclair Inlet. We install walk-through gates with self-closing hinges and latches that don’t seize in the marine air. A standard pedestrian gate for a Port Orchard home runs $950 to $2,200, including hardware and a solid post set.
Sliding Gate Installation
Sliding gates suit the long, flat driveway runs we see throughout the 98367 South Kitsap corridor, especially where a swing gate would fight the gravel or the grade. We pour the concrete track pad, set the cantilever rollers, and wire the operator. Expect $3,800 to $6,400 for a powered sliding gate in Port Orchard, depending on gate weight and opener brand.
Swing Gate Installation
Swing gates remain the most common choice for Port Orchard’s semi-rural lots, and they’re the ones most vulnerable to our winter clay heave. We set posts deeper than standard and backfill with drainage gravel so the post doesn’t get pushed out of plumb by March. A single swing gate installation runs $1,850 to $3,600. Double swing gates start around $3,200 and go up with automation and gate material.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Port Orchard
We service and install Gate Installation operators from Viking, Ghost Controls, DoorKing, and Elite, and we keep common boards and remotes on the truck for all of them. If you already have one of these brands and it’s acting up, we’ll tell you honestly whether it’s worth repairing or whether you’re throwing money at a board that’s already corroded from salt-laden moisture. We certified to work on all of them, and we don’t push you toward a brand we happen to have in the shop. What you need for a Port Orchard marine climate matters more than our inventory.
Common Gate Installation Problems We See in Port Orchard Homes
- Salt-corroded hinges on waterfront properties: Along the 98366 Sinclair Inlet corridor, uncoated steel hinges develop rust bloom and seize within three to five years. We default to stainless steel hinges on every waterfront install because it’s cheaper than replacing hinges twice a decade.
- Clay heave pushing posts out of plumb: The glacial clay under Port Orchard absorbs winter rain and swells, shoving hinge posts two to four inches out of alignment by early spring. Double gates then miss their latch entirely. Our concrete footings run deeper and include drainage gravel to reduce the movement.
- Corroded automatic operator boards: Salt-laden moisture off Sinclair Inlet creeps into unsealed control boards and corrodes circuit traces. The mechanical parts look fine, but the opener fails intermittently. We seal boards and use dielectric grease on connections for every Port Orchard install near the water.
- Rotted wooden hinge posts on 20-to-30-year-old gates: The 1990s and 2000s developments across 98367 are full of original wooden gate posts that have quietly rotted at the soil line. By the time the gate sags, the post is usually gone underground. We set pressure-treated or steel posts and re-square the gate rather than slapping a strap hinge on a bad post. Fix the post or fix it twice.
Pricing for Gate Installation in Port Orchard, WA
Gate installation in Port Orchard runs $1,850 to $6,400 for typical residential jobs. Here’s the breakdown most homeowners ask about:
- Pedestrian gate: $950-$2,200
- Single swing driveway gate: $1,850-$3,600
- Double swing driveway gate: $3,200-$5,200
- Powered sliding gate: $3,800-$6,400
What moves the price is gate material (steel, aluminum, or wood), automation, post depth through our clay, and whether you’re near the inlet where stainless hardware is non-negotiable. We quote every job in writing before the work starts, and that price doesn’t change at the door. Call (877) 610-2993 and we’ll come measure. The estimate is free, and there’s no trip charge anywhere inside Kitsap County.
We Also Serve Cities Near Port Orchard
Most of our weeks are spent across Gate Installation in Port Orchard and the surrounding communities. We run crews into East Port Orchard, Parkwood, Bremerton, and Maplewood regularly, so scheduling is usually a matter of days, not weeks. If you’re right on the edge of 98366 or 98367, call and ask. We’ll tell you straight whether we’ll get there the same week.
Serving Port Orchard, WA - Our Local Coverage Area
We’re based in the Port Orchard area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Port Orchard
Galvanized steel hinges on a gateway near Sinclair Inlet will last three to five years before rust seizes them, because the salt-laden air off the water eats through the zinc coating two to three times faster than it does in inland Kitsap communities like Silverdale. Stainless steel hinges cost more up front but don’t rust in marine air. On any waterfront installation in 98366, we spec stainless hinges, fasteners, and latch hardware as standard because replacing seized hinges every few years costs more than doing it right the first time. Call (877) 610-2993 and we’ll show you the difference before you decide.
The glacial clay across 98367 holds water all winter and swells when it’s saturated, which pushes gate posts out of plumb and throws double gates out of alignment. We set our footings deeper than standard, usually 36 to 42 inches, and backfill with drainage gravel so water moves away from the post instead of freezing and heaving against it. We also use steel or pressure-treated posts rated for ground contact, which matters more here than in sandier soil across the water. If your gate misses the latch every spring, call (877) 610-2993 for a free assessment.
For Port Orchard specifically, look for an operator with a sealed control board and a robust internal ground, because salt-laden moisture off Sinclair Inlet corrodes unsealed boards even when the mechanical side looks brand new. We recommend and install Viking, Ghost Controls, DoorKing, and Elite operators, and on waterfront jobs we add board sealing and dielectric grease on every connection. This is not cosmetic. We see boards in Port Orchard that fail intermittently within two years because moisture got into the circuitry. A properly sealed operator board should hold up as long as the rest of the gate. Call (877) 610-2993 for a specific recommendation based on your driveway and your distance from the inlet.
As a rule, it’s a post problem. A gate sags in the hinge post, not in the middle, and the saturated Kitsap clay pushes those posts out of plumb over winter. By spring, double gates across 98367 are sitting two to four inches out of alignment, and the latch no longer engages. We fix the post first: set it deeper, backfill with drainage gravel, and re-square the gate, then recalibrate the operator limits. If the posts are rotted at the soil line, we set new ones. Replacing the latch or the hinges won’t fix it if the post is moving. Call (877) 610-2993 and we’ll diagnose it on site.
Yes, a sliding gate needs a concrete track pad or a cantilever foundation poured along the path of the gate, even on a gravel driveway. The clay soils across Port Orchard heave seasonally, and a sliding gate on a gravel base will shift and bind within the first year. We pour a small reinforced concrete pad, usually 12 to 18 inches wide, set the rollers on it, and then hang the gate so it rides smooth through wet winters and dry summers. The pad isn’t optional. Call (877) 610-2993 and we’ll measure your driveway and give you a written price that includes the pad, the gate, the opener, and nothing hidden.
If your gate is sagging, seized, or throwing its opener out of alignment in Port Orchard, call (877) 610-2993. We’ll pick up. We’ll come out. And we’ll tell you the truth about what needs fixing versus what needs replacing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Port Orchard since 2001.