Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pico Rivera
A new driveway gate in Pico Rivera typically runs $1,800 to $6,500 installed, depending on whether you’re replacing an existing ornamental iron swing gate or starting from scratch with a sliding gate, motor, and access keypad. That’s the honest range we quote before any work starts. We’ve been repairing and installing gates in the 90660, 90661, and 90662 ZIP codes long enough to know which neighborhoods have post footings set too shallow and which blocks fight Santa Ana wind every fall. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Pico Rivera’s Preferred Gate Installation Company
Hal Gatewood has been at this since 2001, and the name on the truck matches the name on the invoice. When a Pico Rivera homeowner calls us about a sagging double swing gate on a 1970s home near the San Gabriel River, Hal or one of his crew shows up. Not a rotating cast of strangers. We know the post-war housing stock here, the narrow side yards off streets like Rosemead Boulevard, and the way a concrete driveway shifts after forty years of settling.
Our Gate Installation work carries the 90-Day Done Right Promise in writing. If a gate we hung doesn’t close square or a motor we mounted starts binding, one call brings us back. No runaround, no fine print. Pico Rivera customers also get straightforward standing offers: $40 off any repair over $200, a free second opinion on any written estimate, and no trip charge inside the county.
Reviews from Pico Rivera homeowners mention the same things: the person who shows up is the person you talked to on the phone, the price quoted is the price on the invoice, and the work gets done in the window promised. We answer calls live 24/7. That matters when your gate stops working at 6 a.m. on a Monday because a windstorm knocked a hinge bracket loose and your car is parked behind it.
Our Gate Installation Services in Pico Rivera
Driveway Gate Installation
Driveway gates in Pico Rivera are usually ornamental iron swing gates retrofitted onto 1950s and 1960s concrete driveways. We install new single and double swing gates, slide gates for short-setback lots, and full automatic systems with keypads, remotes, and safety photocells. Every driveway gate install starts with checking the existing posts. If the footing is shallow or cracked, we pour a proper one before hanging a new gate on it.
Pedestrian Gate Installation
Pedestrian gates off Whittier Boulevard and the residential streets around Rivera Park see heavy daily use, which means the hinges and latch take real abuse. We install steel and ornamental iron walk gates with commercial-grade hinges sized for that wear. If you’re replacing a gate that’s sagged into the concrete, we’ll set the post deeper than the original so you don’t have the same problem five years from now.
Sliding Gate Installation
Sliding gates work well on Pico Rivera homes where the driveway runs close to the house and there isn’t room for a swing radius. We install cantilever and V-track slide gates, including the motor, rack, and safety edges. Around the Rio Hondo corridor, we use stainless rollers and sealed bearing hardware because the ground moisture along the channel rusts standard parts faster than anywhere else in the city. This is not a place to save money on hardware.
Swing Gate Installation
Swing gates dominate Pico Rivera’s residential landscape. We install new single and double swing gates, rehang existing panels, and convert manual gates to automatic with Linear, Viking, Ghost Controls, or DoorKing operators. Wind load on a solid infill double gate is enormous during Santa Ana season, so we size hinges and posts for that lateral force. A gate that looks fine in July can bind hard by October.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pico Rivera
We stock parts and motor kits for Linear, Viking, Ghost Controls, and DoorKing systems, which covers most of the automatic openers running on Pico Rivera driveways today. That means we don’t have to order a control board and make you wait a week while your gate sits open. If you have a different brand, we’ll still take a look. Hal has been fixing gate motors since before most of these brands had smartphone apps, and he carries the common service parts in the truck.
Common Gate Installation Problems We See in Pico Rivera Homes
- Santa Ana hinge fatigue on swing gates. Repeated lateral wind load bends hinge brackets and pulls lag bolts out of the post. The gate starts dragging on the driveway or won’t latch. Replacing the hinge alone won’t fix it if the post is tilted, which is why we check post alignment first on every Pico Rivera swing gate.
- Shallow post footings that fail in saturated ground. Gates built in the 1950s through the 1970s often had posts set with 18-inch footings. A few good winter rains and the post leans. When that happens, we dig a 36-inch footing, set the post plumb, and rehang the gate so it clears the driveway properly.
- Rio Hondo corridor corrosion. Homes west of Rosemead Boulevard near the flood-control channel get ground moisture that rots bottom rollers, threshold plates, and slide gate track hardware faster than anywhere else in 90660. We’ve seen rollers corrode to dust in five years. Swapping them for sealed, stainless components is the only fix that lasts.
- Hard water mineral buildup on hinges. San Gabriel Valley Water Company water is hard, and outdoor irrigation overspray adds to it. Mineral deposits accumulate on hinge pins and gate hardware, making swing gates grind instead of swing smoothly. Clean and re-lubricate the pin before it seizes, or the hinge starts to eat the post.
Pricing for Gate Installation in Pico Rivera, CA
A single ornamental iron swing gate with rehung panels on existing posts runs $1,800 to $3,200 in Pico Rivera. A new double swing gate with new posts and footings lands between $3,500 and $5,500. Slide gate installations run $4,000 to $6,500 including the track, motor, and safety edges, depending on gate length and whether we’re trenching power to the post. Automatic opener retrofits on an existing manual gate start around $1,200 for a basic chain or belt drive, with keypad entry and photocells adding $300 to $600.
What moves the number is the condition of the existing posts, the gate length, and whether we’re running new electrical or adding access control. The price is quoted and agreed before any work begins. Not a penny more at the door. Call (877) 610-2993 and we’ll schedule a free measure, walk the site with you, and hand you a written number.
Why Swing Gates Fail at the Hinge Post During Santa Ana Season
The Santa Ana winds that blow through the San Gabriel Valley put real, repeated lateral stress on solid-infill iron gates. A double swing gate two hundred pounds per leaf acts like a sail. Each gust pushes the gate sideways, and every push transfers to the hinge post. After enough seasons, the lag bolts work loose, the post leans a degree or two, and the gate starts dragging. Pico Rivera has a huge stock of ornamental iron driveway gates installed in the 1970s through the 1990s, and nearly all of them are reaching that failure point at once. It’s not bad luck. It’s fatigue. And it’s fixable with properly set posts and oversized hardware.
How Do I Manually Open My Automatic Gate During a Power Outage From a Windstorm?
Every automatic gate opener has a manual release mechanism. On most Linear and DoorKing swing openers, you’ll find a keyed release cylinder on the top or side of the operator arm. Insert the key, turn it, and pull the release handle to disengage the motor. The gate will then swing freely by hand. On slide gate openers, there’s usually a release lever on the gearbox housing. Open it, and push the gate manually. If you don’t know where your release is, call (877) 610-2993 while the power is still out and we’ll walk you through it by phone. Then get the gate working again before the next wind event.
We Also Serve Cities Near Pico Rivera
Our crews work throughout the surrounding area, including West Whittier-Los Nietos, Montebello, Santa Fe Springs, and Bell Gardens. If you’re in Pico Rivera or a neighboring community, the same crew and the same 90-Day Done Right Promise apply.
Serving Pico Rivera, CA - Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Pico Rivera
Santa Ana winds push laterally against the solid face of an ornamental iron swing gate, and every gust transfers that force straight into the hinge post. Posts set with shallow 18-inch footings from the 1950s through the 1970s start to lean after decades of that repeated load. The lean misaligns the hinges, the gate drags, and the motor starts straining. The fix is a properly poured footing and rehung hinges, not just a new hinge bolted to a leaning post. In Pico Rivera, this is the single most common swing gate failure we correct. Call (877) 610-2993 for an exact fix, estimates are free.
Find the manual release on your operator. Most swing gate openers have a keyed cylinder on the arm, and most slide gate openers have a lever on the gearbox. Disengage the motor, and the gate moves freely by hand. If the operator arm or release is damaged from the storm, you may need a service call to free it. Call (877) 610-2993 and we’ll help you get the gate open safely right now. If the release is broken, we’ll come out same day during storm recovery.
Homes near the Rio Hondo flood-control channel in western Pico Rivera sit on saturated ground for part of the year, and that moisture wicks up into bottom rollers, threshold plates, and track hardware. Standard zinc and powder-coated parts rust out in five years or less. Gates on the east side of the city, away from the channel, don’t see the same corrosion. The fix is sealed stainless rollers and stainless threshold plates sized for constant moisture contact. Call (877) 610-2993 and we’ll tell you exactly what’s rusted and what should replace it.
Yes. Solar openers work well on Pico Rivera driveway gates because the San Gabriel Valley gets strong sun even in winter, and a properly sized panel rarely loses charge. The wind question is about the opener’s torque capacity, not the solar source. For a solid double swing gate, we recommend a heavy-duty operator with enough holding force for lateral wind load. Cheap light-duty openers burn out fast in Pico Rivera’s fall wind season. We size the motor to the gate’s sail area, not the length. Call (877) 610-2993 for a recommendation for your specific gate.
Not necessarily. Cracks radiating from the gate post usually mean the footing is failing or the post is moving under load. The gate panels themselves are often perfectly fine. We cut out the old post, pour a proper 36-inch footing with rebar, reset the post plumb, and rehang the existing panels. It’s typically a $600 to $1,200 fix, which is a lot less than a new gate. But if the gate panels are also rusted through or bent from impact, replacement makes more sense. Call (877) 610-2993 and we’ll assess it on site for free.
Get Your Pico Rivera Gate Installed Right the First Time
If your gate is sagging, your opener is dead, or you’re starting fresh with a new driveway gate, we’ll give you an honest price before any work begins and stand behind the job with the 90-Day Done Right Promise. Hal Gatewood has been at this since 2001, and the shop’s name is on every invoice. Call (877) 610-2993 today for a free estimate. A live person will answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pico Rivera and the surrounding San Gabriel Valley since 2001.