Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pembroke Pines
A complete gate installation in Pembroke Pines, FL typically runs $3,200 to $9,500 depending on gate type, length, and whether an operator gets added. Most swing and sliding gate installs take one to two days on site once materials are ready, and we quote the full price before any work starts. If you’re in a gated community in the 33028 ZIP, your HOA board likely needs to sign off first, and we’re familiar with that process. Call (877) 610-2993 and you’ll get Hal Gatewood or someone from his crew, not a voicemail tree.
Why Gatewood Fence & Gate Is Pembroke Pines’s Preferred Gate Installation Company
Hal Gatewood has been at this since 2001, and his name is on the shop. That matters in Pembroke Pines, where a lot of the gate work happens at HOA entrances and in communities where people talk to their neighbors. A bad install gets noticed fast here. We’re locally owned and owner-operated, with a published address and license number anyone can look up. The person who shows up to your driveway in western Pembroke Pines is backed by a 90-Day Done Right Promise in writing, not buried in fine print. If it’s not done right, one call brings us back.
We answer the phone with a live person 24 hours a day, seven days a week. No dispatch queue, no call center three states away. That matters when a storm knocks out power in the middle of the night and you need to know how to get your gate open manually. And it matters when your Century Village entrance gate quits during the summer wet season and the board needs someone who actually understands what they’re looking at.
Our Gate Installation Services in Pembroke Pines
Our Gate Installation team handles the full range of work in Pembroke Pines, from single driveway gates to multi-lane community entrances. We weld on site, which means a gate that needs a hinge post repair doesn’t get hauled away to some shop across the county. Hal fixes it in your driveway. Here’s what we install most often in this area.
Driveway Gate
Driveway gates in Pembroke Pines run the gamut from ornamental aluminum single gates on Chapman Road to heavy steel double gates in SilverLakes. The flat, low terrain in the 33028 ZIP means we pay extra attention to drainage around the operator housing. A gate that works beautifully in January can short out in July if the underground box floods. We plan the footing and the operator placement around that from day one.
Pedestrian Gate
Pedestrian gates in Pembroke Pines are usually part of a larger community entrance or a side-yard access point in a single-family home. These gates look simple, but a sagging pedestrian gate in a townhome community off Pines Boulevard gets noticed by every resident who walks through it. We weld and hang them properly the first time, with hinges sized for the actual gate weight, not just whatever was on the truck.
Sliding Gate
Sliding gates are common in Pembroke Pines commercial and HOA settings where space is tight and swing gates would block a driveway or sidewalk. These gates ride on rollers, and when the ground stays saturated through the wet season, the track can shift. We set sliding gate tracks on deeper bases than you’ll see in a spec sheet, because the water table here doesn’t drain the way it would inland. It’s the kind of detail that separates a gate that works for years from one that binds after the first heavy rain.
Swing Gate
Swing gates are the most common driveway gate in Pembroke Pines, especially in the master-planned subdivisions built out in the late 1980s and 1990s. A swing gate is only as good as its hinge post, and the hinge post is only as good as the footing underneath it. In western Pembroke Pines, where the ground goes from baked dry to saturated in a week, we spec deeper footings and heavier posts than the minimum. A gate sags in the hinge post, not in the middle, and that’s where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pembroke Pines
We’re certified to service nine major gate brands, including FAAC, BFT, Linear, and Viking. That covers most of the operators currently installed across Pembroke Pines, from the LiftMaster units in single-family homes to the heavy-duty Viking and BFT operators running at community entrances. Because we work in Pembroke Pines regularly, we keep common parts and boards for these brands on hand, which means fewer days waiting on a freight shipment while your gate sits open. When a DoorKing unit at a Century Village entrance fails, we have the replacement parts or know exactly where to get them fast.
Common Gate Installation Problems We See in Pembroke Pines Homes
- Flooded underground operator housings. The flat, low-lying lots in western Pembroke Pines pool standing water from May through October. Underground gate operator boxes fill up, short the control board, and kill the motor. We raise operator housings above grade when we install new gates, and we seal conduit entries so water can’t follow the wires in.
- Solid infill gates acting as wind sails. Pembroke Pines gets tropical storm gusts, and a solid aluminum or steel panel gate catches that wind like a sail. The hinge post takes the brunt of it. We see bent posts and torn weld points after every storm season. The fix starts with a properly sized post and a deeper footing, not just a new hinge.
- Aging operators in master-planned communities. The gates installed during the 1990s and early 2000s building boom are now hitting 20 to 30 years old, and they’re failing in batches. HOAs across Pembroke Pines are dealing with gate entrances that need full operator replacements, often on two or three lanes at once. We work with boards to schedule phased replacements so a community isn’t left with an open gate for a week.
- Corroded hardware from humidity and UV exposure. Year-round humidity in Pembroke Pines accelerates rust on exposed steel fasteners, hinges, and track components. Salt air from the coast, even ten miles inland, makes it worse. We use corrosion-resistant fasteners and powder-coated hardware on every install, not the cheap zinc stuff that rusts out in three years.
Pricing for Gate Installation in Pembroke Pines, FL
Here are honest ranges for what we charge in Pembroke Pines. A single driveway swing gate with a quality operator typically runs $3,500 to $6,800 installed. A double swing gate for a wider driveway runs $5,000 to $9,500. Sliding gates run $4,200 to $8,900 depending on width and track work. A basic pedestrian gate runs $900 to $2,200, and adding an access keypad or intercom runs $400 to $1,800 on top. The price we quote is the price you pay, agreed before work starts. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
Information for Pembroke Pines HOAs and Property Managers
Western Pembroke Pines, particularly ZIP 33028, is one of the most densely HOA-gated areas in Broward County. The communities built out from the late 1980s through the early 2000s are now hitting a simultaneous replacement cycle on their original gate operators. That means a lot of the installation work in this city goes through HOA board approvals, shared service contracts, and bulk procurement decisions rather than a single homeowner calling for a driveway gate. Boards need an installer who understands how to phase a three-lane entrance replacement without leaving the community unsecured, and who can produce the documentation the board’s attorney needs. We’ve done this kind of work in Pembroke Pines long enough that we know how to run a board vote smoothly and get the work scheduled without drama.
Storm and Wind Exposure in Pembroke Pines
Every gate we install in Pembroke Pines has to be built for what this climate actually does. Tropical storm gusts turn solid infill gates into wind sails, and when the post footing is marginal, the whole gate leans after one bad summer. Saturated ground during the May to October wet season softens footings and fills underground operator housings. We’ve pulled control boards out of boxes that were half underwater in August, still powered, shorting out. That’s why we spec deeper footings than the manufacturer minimum, raise operator housings above grade, and use sealed conduit entries on every install. If you have a gate that’s leaning after a storm, shut off the operator and call us before the post tears loose from the connections.
Manual release during a power cut
If you lose power in Pembroke Pines during a storm and your gate won’t open, every operator has a manual release. On most FAAC, BFT, Viking, and Linear swing and slide operators, it’s a keyed release on the operator itself or a pull chain behind a small access door. Turning the key disengages the motor so you can push the gate open by hand. We show every customer where the release is before we leave, and we label it. If you can’t find yours or the gate won’t budge, call us and we’ll walk you through it over the phone. If it’s after hours, the phone still rings with a live person.
We Also Serve Cities Near Pembroke Pines
Beyond Pembroke Pines itself, our Gate Installation in Pembroke Pines team works regularly in Cooper City, Pine Island Ridge, Hollywood, and Andover. If you’re in one of those communities and dealing with an aging gate operator or planning a new install, the same crew that serves Pembroke Pines covers your area. Same pricing, same 90-Day Done Right Promise, same live person on the phone.
Serving Pembroke Pines, FL - Our Local Coverage Area
We’re based in the Pembroke Pines area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Pembroke Pines
Every gate operator has a manual release mechanism, usually a keyed cylinder on the operator housing or a pull chain behind a small access panel. Turn the key or pull the chain to disengage the motor, then push the gate open manually. We label the release on every install we do in Pembroke Pines and show you how to use it before we leave. If you can’t find yours during an outage, call (877) 610-2993 and we’ll walk you through it. A live person answers, even at 3 a.m.
A Century Village entrance gate cycles hundreds of times a day, every day. That volume runs motors and control boards to the end of their service life years faster than a single-family gate in Westfork Plaza. Many of those original DoorKing and older operator units were installed when the community was built and are simply past their designed cycle count. We installed a new Viking swing gate operator at a Century Village entrance after the original DoorKing failed during a summer storm. The underground housing had flooded from saturated ground, so we raised the footing, replaced the post footing with deeper concrete, and added a safety photocell and keypad entry before the HOA board re-opened the lane. That kind of high-cycle, flood-prone install is exactly what we plan for.
For low-lying lots in the 33028 ZIP that pool water during the wet season, a sliding gate with a raised track or a swing gate with an above-grade operator housing works best. The key is keeping the motor, control board, and limit switches out of standing water. We recommend placing the operator housing on an elevated concrete pad rather than burying it in a plastic box. A swing gate with a solid infill panel also doubles as a wind sail, so if wind is a bigger concern than flooding, consider an open-panel design. Call (877) 610-2993 and we’ll look at your lot before recommending anything.
We set gate post footings in western Pembroke Pines at a minimum of 36 to 42 inches deep, which is deeper than the 30-inch standard you’ll see recommended elsewhere. The saturated ground during the May to October wet season means a shallow footing will shift under the load of a swinging gate. For solid infill gates that catch wind, we go even deeper and wider. A post set too shallow is the number one reason a new gate sags within two years in this city.
In most HOAs in Pembroke Pines, yes. Communities in the 33028 ZIP almost always require architectural review board approval before a new driveway gate goes in, and some require that the gate matches specific materials or colors. We’ve worked with boards all over Pembroke Pines and we know how to prepare the submittal drawings and specs that get approved without back-and-forth. If you’re unsure whether your community needs approval, call (877) 610-2993 and we’ll help you figure out the first step.
Call Gatewood Fence & Gate for Gate Installation in Pembroke Pines
If you need a new gate installed in Pembroke Pines, or an old one finally put out of its misery, call us. You’ll get Hal or someone from his crew on the phone, a written quote that won’t change at the door, and work backed by the 90-Day Done Right Promise. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is. Call (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Pembroke Pines since 2001.