Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Northville
A new driveway gate in Northville typically runs $4,200-$11,500 installed, and a full slide gate with automation lands between $7,800 and $18,000 depending on length, material, and what your HOA requires at the curb. We quote the job before any steel gets cut, and that number does not change when the truck pulls up. Hal Gatewood has been running Gatewood Fence & Gate since 2001, and when you call (877) 610-2993, a live person answers, not a menu. We know Northville’s subdivisions, its HOA call boxes, and the way its winters treat a gate post.
Why Gatewood Fence & Gate Is Northville’s Preferred Gate Installation Company
Our reputation in Northville comes from showing up on time and standing behind the work in writing. The 90-Day Done Right Promise is stamped on every invoice we hand a homeowner in Northville Hills, Orchard Hills, and the older streets off Center Street. If something is not right, one call brings us back. No runaround, no “that’s wear and tear.”
Hal’s name is on the shop. His address is published. His license number is there for anyone to look up. That is the oldest accountability arrangement there is, and it matters when you are writing a check for a gate that has to hold up to a Michigan winter and keep a curious grandkid out of the road.
We get called out to Northville Township regularly for gates that national outfits installed and abandoned. Homeowners there tell us the same thing: the phone quoted one price, the door quoted another, and nobody answers when the gate stops working in February. We run it the other way. You get a written price before we start, and Hal’s cell number after.
Our Gate Installation Services in Northville
Our Gate Installation team handles everything from a single pedestrian gate off the side yard to a double swing gate across a 24-foot driveway entrance. Here is what that work looks like in Northville specifically.
Driveway Gate
A driveway gate in Northville is usually powder-coated aluminum or ornamental iron, and it is almost always automated. Installation means setting posts below the 42-inch frost line, hanging the gate so it swings true, mounting the operator, and wiring the safety edges and photo-eyes. We handle the whole run, including the low-voltage conduit from the house or the HOA call box.
Pedestrian Gate
Pedestrian gates in Northville’s older downtown district sometimes need period-matched hardware so a new gate does not look like a patch on an 1890s iron fence. We weld on site, so those small gates get built and hung in your yard, not hauled away to some shop.
Sliding Gate
Sliding gates are the workhorse of Northville Township, especially on wider drives where a swing gate would eat half the yard. The challenge in this zip code is freeze-thaw: the rail and the concrete pad it rides on have to survive years of heaving ground. We set the track on a deeper, reinforced pad and use operators built for cold starts, because a slide gate that will not roll in January is not a gate, it is a storage problem.
Swing Gate
Swing gates in Northville fail most often at the hinge post. Michigan ground heaves, the post leans a half inch, and the gate starts dragging on the latch side. We pull the post, re-plumb it below frost, and re-set it in concrete before hanging a new gate. Fix the panel without the post and you will fix it twice. We say that because we have watched it happen.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Northville
We install and service FAAC, BFT, and Linear operators, plus Viking gate arms and post mounts, and we keep common parts on the truck rather than sending a Northville customer down to Livonia for a control board. When your HoA’s property manager asks what operator is going in, we can hand you a brand name and a spec sheet that day. That matters in a community where call boxes and gate operators have to talk to each other.
Common Gate Installation Problems We See in Northville Homes
- Heaved hinge posts from Michigan’s freeze-thaw cycles. Northville frost depths reach 42 inches, and posts set above that line move every winter. A gate that sagged in March was out of plumb by January, even if it looked fine in September.
- Ice intrusion in swing gate operator housings. Southeast Michigan’s freeze-thaw belt puts water inside the gearbox and motor casing. It freezes, it thaws, it freezes again. From December through February, that is the number one gate motor killer we see in Northville.
- Obsolete 1990s control boards. The subdivisions built in Northville Township between 1990 and 2015 are full of operators whose original boards no longer talk to modern safety photocells or smartphone entry. A new board often costs more than a new operator, and we tell you that before you spend anything.
- Gates hung without safety edges or photo-eyes. Some older Northville installations predate Michigan’s safety requirements for automatic gates. We will not leave a gate like that running. Retrofitting a photo-eye and an edge sensor is part of any install we do, and it is not optional.
Pricing for Gate Installation in Northville, MI
A single swing gate across a standard Northville driveway runs $4,200-$7,800. A sliding gate on a 16-20 foot opening lands between $7,800 and $12,500. A double swing gate with automation and HOA call box integration typically goes $9,000-$15,000, and heavier ornamental iron on estate lots in Northville Township can reach $18,000. What changes the number is the gate length, the material, the operator brand your HOA approves, and how much underground conduit has to be run. The quote is written and agreed before we start. You get $40 off any install over $200, and seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and we will come measure.
We Also Serve Cities Near Northville
We work across the same southeast Michigan cold belt from Gate Installation in Northville out to Plymouth, Novi, Farmington Hills, and Livonia. If you are a mile over the city line, the truck still rolls. The frost depth is the same, and so is our pricing.
Serving Northville, MI - Our Local Coverage Area
We’re based in the Northville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Northville
Usually yes, but the control board has to go. A 1990s FAAC or BFT board in a Northville subdivision typically cannot accept the newer low-voltage signals from a smartphone entry bridge or an updated DoorKing call box. We replace the board and the receiver, keep the existing gate panel if it is still square, and wire everything so the same keypad and intercom work on day one. Call (877) 610-2993 and we will come look at what is hanging on your posts.
Because the hinge post is moving. Northville’s ground heaves every winter, and a post that was installed above the frost line shifts half an inch or more each season. The gate sags in the hinge post, not in the middle. We pull the post, dig down below 42 inches, re-plumb it, and set it in concrete. Then the gate goes back up true. Weld the panel all you want; if the post is moving, the sag comes back.
Yes, and the property managers will check. Northville Township subdivisions built between 1990 and 2015 often run the gate operator through the same low-voltage panel as the community call box and intercom. If the installer cannot read that panel and tie the gate into it, the HOA will reject the job before it starts. We do that integration on every automated install we handle in Northville.
For many Northville sliding gates, replacement is the cheaper answer. Ice intrusion inside the motor housing seizes the gearbox and usually shorts the board. By the time we rebuild both, you have spent more than a new operator with a heated gearbox and a proper seal kit. We will show you the difference in writing before you decide. We would rather fix a gate than replace it, but we will not sell you a rebuild that dies next January.
Yes. Michigan requires automatic gates to have entrapment protection, which means photo-eyes or an edge sensor, or both, on any gate that moves under power. Some older Northville gates predate the requirement. We will not leave one of those running without retrofitting the safety system. It is a liability for you and a safety problem for anyone who visits your house. We include photo-eyes and edge sensors in every automated installation quote.
Key Takeaways
- Gate installation in Northville typically falls between $4,200 and $18,000 depending on size, material, and HOA requirements.
- Freeze-thaw cycles below 42 inches routinely move gate posts, which is why hinge post re-setting is standard practice here.
- Northville Township HOA subdivisions need installers who can wire gates into the same low-voltage panels as community call boxes.
- Many 1990s gate operators in Northville are better replaced than repaired, and we will tell you that honestly before you spend a dollar.
- Call (877) 610-2993 for a free measure and a written price. A live person answers.
If your Northville gate is tired, leaning, or running on a board from the Clinton administration, we would rather look at it before you replace anything. Hal will come out himself, measure it, and tell you what is worth saving. The name is on the shop, and the shop is down the road. Call (877) 610-2993 and set it up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Northville since 2001.