Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Atlanta
A new driveway gate in North Atlanta typically runs $3,400 to $11,500 installed, and most custom swing or slide gate projects take 2 to 4 weeks from measure to final walkthrough. We’re Hal Gatewood’s crew, and we’ve been welding, hanging, and automating gates for North Atlanta homeowners since long before the teardown wave changed the look of Brookhaven’s streets. When you call (877) 610-2993, a live person answers, and we’ll set a time to come measure your drive, look at your posts, and give you a written price before any work starts.
Why Gatewood Fence & Gate Is North Atlanta’s Preferred Gate Installation Company
Most of the gates we install in North Atlanta are heavy, custom builds on steep, narrow infill driveways. That’s not a job for a crew that shows up with a trailer of prefab panels and a one-size-fits-most opener. Hal has been at this since 2001, and his name is on the shop. The same person who quotes your gate is the person who will be standing in your driveway while it gets welded, plumbed, and cycled. That matters in a place like Brookhaven, where a gate post that’s half an inch out of plumb will bind an operator within a season or two.
North Atlanta customers call us because we answer the phone around the clock, show up in the window we give you, and put a 90-Day Done Right Promise in writing on every job. If it isn’t done right, one call brings Hal back. No runaround, no voicemail tag. That’s how we’ve built a local reputation in the 30319 zip over the years, and it’s why homeowners in Ashford Park, Colonial Homes, and along Peachtree Road keep our number in their phones.
Our Gate Installation Services in North Atlanta
Most North Atlanta properties don’t have the flat, open run space you’d find in a wider county lot. The infill pattern here means short, steep drives, custom columns, and a real need to get the hinge geometry right the first time. Here’s what we handle most often.
Driveway Gate Installation
A new driveway gate in North Atlanta usually means a custom-fabricated ornamental iron or aluminum gate matched to the house’s existing stucco, brick, or stone. We build for weight and cycle life, not just curb appeal, because a gate that sags into the drive in year two wasn’t hung right to begin with. Most driveway gates we install in this area run $4,200 to $11,500 depending on width, material, and operator type.
Swing Gate Installation
Swing gates dominate in North Atlanta’s 30319 corridor because most lots lack the lateral run space a slide gate needs. A dual swing gate on a Brookhaven infill drive has to clear a slope while staying plumb through red clay seasonal movement. We set hinge posts below the frost line and account for the expansive soil before we ever hang a panel. Expect $2,800 to $7,500 for a solid single or double swing gate, including the operator.
Pedestrian Gate Installation
Pedestrian gates in North Atlanta get more wear than people expect. They’re on the side of the house, used daily, often by kids and landscapers, and they need to swing clean and latch without slamming. We fabricate walk gates to match the driveway gate so the whole entry reads as one design. A typical pedestrian gate here runs $1,200 to $3,800 installed, depending on whether it shares a column with the drive gate or needs its own footing.
Sliding Gate Installation
When a North Atlanta property does have the run space, usually on wider estate lots near North Druid Hills or along the Chamblee edge of 30319, a slide gate is often the better answer. Cantilevered slide gates don’t drag a wheel through Georgia red clay, which is a real advantage after a hard rain. But short, steep infill drives are rarely a good slide candidate, and we’ll tell you that plainly rather than sell you a gate that fights the grade. Sliding gates here typically run $3,800 to $9,500 with automation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Atlanta
We install and service operators from FAAC, BFT, Linear, and Viking, among others. The brand matters less than how it’s set up and whether the torque limits, safety edges, and loop detectors are tuned for your specific gate weight and swing radius. That’s what makes a new gate in North Atlanta cycle silently for a decade instead of grinding and erroring out after two summers. We stock common boards and parts for these brands locally, so a North Atlanta customer isn’t waiting on a backordered part from California when an operator fails.
Common Gate Installation Problems We See in North Atlanta Homes
North Atlanta’s housing stock and soil create a specific set of failure patterns. Here’s what we see repeatedly on service calls and new installs around Brookhaven and Ashford Park:
- Post footing heave from mature oak roots. In neighborhoods like Ashford Park and Colonial Homes, water oaks and post oaks planted in the 1960s and 70s have roots that push concrete gate footings out of level. That tilts the column, binds the operator, and requires footing repair, not just hinge adjustment.
- Board-level operator failures on post-2010 systems. The teardown-and-rebuild wave from 2005 through the mid-2010s put a lot of automated gates in the 30319 zip at roughly the same time. Those control boards are aging out together. It’s a board replacement, not a full gate replacement, most of the time, and we’ll tell you that straight.
- Ice-storm hinge and mount damage. North Atlanta gets ice storms a few times a decade, not sustained snow. That ice load bends cantilevered slide gates, shears motor mounts, and twists hinges on exposed hillside drives. If a gate on a steep lot gets hit, the mounts usually fail before the panel does.
- Humid-summer rust and wood swell. Summer humidity around North Atlanta accelerates rust on ornamental iron hardware and swells wood gate components. On a double gate, that swelling is what causes the classic corner sag, and the fix starts at the hinge post, not the middle of the panel.
In the 30319 zip specifically, the client base is largely post-2010 automated gate systems on high-value private drives and infill estates. That’s different from older suburbs where you see aging subdivision perimeter gates. Here, the calls we get are for buried loop detectors disturbed by later landscaping, operator board failures, and post-shift from Brookhaven’s expansive red clay, not simple mechanical wear on a 30-year-old swing arm. If you search for generic Gate Installation advice online, you won’t find that distinction. It comes from doing the work on these specific streets for years.
Pricing for Gate Installation in North Atlanta, GA
Gate installation in North Atlanta isn’t a flat-rate product, and anyone who quotes you one number over the phone before seeing your drive is guessing. That said, here’s what the local market actually looks like. A basic single swing driveway gate with a chain-driven operator starts around $3,400. A mid-range ornamental iron double gate with a belt-drive FAAC or BFT operator and keypad entry runs $6,000 to $9,000. Custom fabricated security gates with matched stucco or brick columns, camera entry, and underground operators on a steep infill drive can push past $15,000. The price is written down before work starts, and Hal stands behind the number. No trip charge inside the county, and we’ll give you a free second opinion on any written estimate you already have.
We Also Serve Cities Near North Atlanta
While this page is focused on North Atlanta, we regularly work throughout Brookhaven, Chamblee, Doraville, and North Druid Hills. If you’re on the edge of those areas or just south of the Perimeter, the same crew, same warranty, and same upfront pricing apply. Call (877) 610-2993 and we’ll let you know when we can get out to your drive.
Serving North Atlanta, GA - Our Local Coverage Area
We’re based in the North Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Atlanta
North Atlanta’s expansive red clay soil is the main culprit, and it’s worse in 30319 because of the mature tree canopy. Water oaks and post oaks planted in the 1960s and 70s put roots under gate footings, and the seasonal wet-dry cycle of Georgian clay makes those footings heave. When the column tilts even a few degrees, it binds the operator. The fix is a deeper footing, not just shimming the hinge. Call (877) 610-2993 if you see your gate dragging or lurching, and we’ll tell you whether it’s a footing issue or something simpler.
Yes, and we see it constantly in the teardown-rebuild areas of Brookhaven. The wave of spec and custom builds from 2005 through the mid-2010s put in a lot of automatic gate operators at roughly the same time, and those boards and capacitors are now aging out together. The first failure is almost always the control board, not the motor itself, so the gate usually doesn’t need a full replacement. We keep FAAC, BFT, Linear, and Viking parts in stock for North Atlanta customers specifically because this cycle is hitting the area hard right now. Call (877) 610-2993 and we’ll diagnose it over the phone first.
We can. North Atlanta’s infill homes often have gate columns built to match the house’s stucco or brick exterior, and when a post shifts or fails, the replacement has to disappear into that finish. We work with local mason and stucco trades who match texture and color, and we fabricate the new iron to match the original panels. It’s detail work, not a swap. If you’re in Ashford Park or Colonial Homes with a water oak heaving a column, call (877) 610-2993 and we’ll come look at it before you commit to anything.
A swing gate needs room to arc inward or outward, and on a steep, narrow infill drive, the hinges and posts take real structural load. A slide gate needs lateral run space, flat ground, and a cantilever track that won’t drag through Georgia mud. Most Brookhaven drives we see are too short and too steep for a slide gate, so a properly hung swing gate, usually with a vertical pivot or a heavy-duty hinge post, is the answer. We’ll measure your grade and run space before recommending one. Call (877) 610-2993 for a free measure.
You do. Under UL 325 standards and Georgia code, any automated gate in North Atlanta needs entrapment protection: monitored safety edges, photocells, or both, depending on the gate type and location. It’s not an upsell; it’s the law and it’s safety. A gate that pushes a child or pet against a column is a liability no family should carry. Every gate we install includes proper entrapment protection, calibrated for the specific gate weight and swing. Call (877) 610-2993 and Hal will walk you through what your specific drive requires.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Atlanta since 2001.