Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Norcross
Gate installation in Norcross, GA isn’t a one-size-fits-all job. The housing stock here swings from 1940s bungalows near the historic downtown to 1980s ranch homes with iron swing gates to high-density apartment complexes off Jimmy Carter Boulevard running 300+ gate cycles a day. That range demands a company that actually knows Norcross, not a franchise that plugs your ZIP code into a pricing sheet. Hal Gatewood and our crew install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates that match the way Norcross properties actually get used. Call (877) 610-2993 and you’ll get Hal or a live person on the line, any hour, any day.
Why Gatewood Fence & Gate Is Norcross’s Preferred Gate Installation Company
Hal Gatewood has been at this since 2001. The company name is on the shop, the license number is published for anyone who wants to verify it, and we’re not passing through Norcross on our way to somewhere else. When we install a gate in the 30092 ZIP, we know the red clay soil under the post will heave when the rainy season hits. We know the humidity off the Chattahoochee corridor will rust cheap powder coating faster than the manufacturer admits. We bring that knowledge to every quote.
Norcross homeowners and property managers keep calling us back for a simple reason: our 90-Day Done Right Promise is written on every invoice, not buried in fine print. If something isn’t right, one call brings Hal back. No runaround, no “that’s not covered.” The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
We answer the phone with a live person 24/7. Not a voicemail, not a call center three states away. When a gate fails at 2 a.m. at a Norcross apartment complex, someone picks up and starts solving the problem. Call (877) 610-2993 and you’ll hear a voice, not a menu tree.
Our Gate Installation Services in Norcross
Driveway Gate Installation
A driveway gate in Norcross has to handle more than curb appeal. It’s the first line of security for homes along Beaver Ruin Road and Singleton Road, and it needs to cycle reliably every time you pull in. We install steel, aluminum, and ornamental iron driveway gates sized to your opening and your vehicle clearance, with operators matched to how often the gate actually moves. If you’re in a 1970s ranch subdivision with a single-family gate that cycles ten times a day, we won’t sell you a commercial operator you don’t need. If you manage a 200-unit complex off Buford Highway, we’ll tell you straight that a residential-rated unit will burn out in two years.
Pedestrian Gate Installation
Pedestrian gates matter in Norcross because so many properties have separate walk-through access, especially townhome communities and the apartment corridors around Jimmy Carter Boulevard. We install pedestrian gates with proper latching, self-closing hinges, and matching keypad or card access where the property needs it. These gates do not get the same cycle count as vehicle gates, but they still need current UL 325 entrapment protection and hardware that survives Georgia humidity without rusting shut.
Sliding Gate Installation
Sliding gates dominate Norcross’s multi-family and commercial properties along Buford Highway and Jimmy Carter Boulevard. The dominant failure we see is residential-rated slide operators that developers installed cheaply in the 1990s and 2000s, then ran 300-400 cycles daily for a decade. The motor seizes, the logic board scorches, and the fix is not a new motor bolted onto the same tired frame. It’s a full replacement with a commercial-grade operator, new post footings to handle Gwinnett clay heave, and a properly tuned rack and pinion drive. We install Viking, DoorKing, LiftMaster, and Elite slide systems matched to actual daily cycle counts, not the spec sheet someone hoped for in 1998.
Swing Gate Installation
Swing gates are common throughout Norcross’s residential streets, from the historic homes near downtown to the 1980s subdivisions off Beaver Ruin Road. The recurring problem is the soil under the hinge posts. Gwinnett red clay expands and contracts with wet and dry cycles, heaving posts out of alignment. A gate sags in the hinge post, not in the middle, and that’s where we start. We set deeper concrete footings than the original builder used, weld hinges on site when the frame needs reinforcement, and match the operator to the gate’s weight. Springs and cables on a heavy ornamental iron swing gate are dangerous to work with. If a torsion spring snaps, do not stand near it. Call someone trained to handle it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Norcross
We’re certified to service nine major gate brands, and Norcross properties run a lot of Linear, Viking, Ghost Controls, and DoorKing equipment. We stock common parts and retrofit kits locally so a Norcross job doesn’t stall waiting on a part from a regional warehouse. When a 1990s Apollo slide operator can’t be saved, we can quote a DoorKing replacement same day and usually have it installed within the week. When a Viking swing operator needs a new control board, we splice in a retrofit kit that brings the gate up to current UL 325 entrapment protection without ripping out everything else.
Common Gate Installation Problems We See in Norcross Homes
- Residential-rated slide operators on multi-family gates. Along Jimmy Carter Boulevard and Buford Highway, gates cycle 200-400 times daily on units rated for maybe 60. Motors burn out, logic boards fry, and the smart move is a commercial-grade replacement, not another repair that fails in 18 months.
- Red clay soil heaving hinge posts. Gwinnett County’s red clay expands and contracts sharply with wet and dry cycles. Norcross swing gates sag and strip rack and pinion drives as the frame twists. New footings have to go deeper than the original builder’s pour, or the new gate starts sagging on day one.
- Missing entropy protection on developer-installed gates. Gates installed in Norcross’s 1990s apartment boom often lack modern UL 325 safety photocells or edge sensors. Retrofit kits need to be spliced into aging control boards, and if the board is already fried, replacement is cheaper than trying to patch safety into an obsolete controller.
- Rust and corrosion from Georgia humidity. Norcross summers are humid, and ornamental iron gates near the Chattahoochee corridor rust faster than they would in drier climates. Powder coating that looked fine at install shows rust blooms within five to seven years. We weld replacement pickets on site and repaint with a coating matched to the local humidity, not a generic shop job.
Pricing for Gate Installation in Norcross, GA
| Installation Type | Typical Norcross Range |
|---|---|
| Pedestrian gate (steel, single walk-through) | $900 - $1,800 |
| Residential swing gate (single, ornamental iron) | $2,800 - $5,500 |
| Residential sliding gate (single, steel or aluminum) | $3,200 - $6,000 |
| Double driveway gate (swing, steel or iron) | $5,500 - $11,000 |
| Commercial slide gate with operator | $7,000 - $18,000 |
| Security gate with access control and cameras | $9,000 - $25,000+ |
These are real numbers for Norcross’s market. A commercial slide operator for a high-cycle apartment gate off Buford Highway will land at the higher end because the unit and the footings have to be rated for 300+ daily cycles. A single residential driveway gate on a quiet street near downtown Norcross lands at the lower end. Every price is quoted and agreed in writing before any work starts. We’ll give you a free estimate, and we honor a permanent 10% discount for seniors and veterans. Call (877) 610-2993 to schedule a measure.
We Also Serve Cities Near Norcross
Our crews serve Norcross and the surrounding Gwinnett County communities, including Duluth, Lilburn, Lawrenceville, and Peachtree Corners. If you’re a property manager with gates across multiple locations, call us at (877) 610-2993 and we’ll schedule a walkthrough for the full portfolio. The more gates we quote at once, the more you save on trip time.
Serving Norcross, GA - Our Local Coverage Area
We’re based in the Norcross area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Norcross
A full replacement is the default because the residential-rated slide operators installed during Norcross’s 1990s boom were never designed for 300-400 daily cycles along Jimmy Carter Boulevard or Buford Highway. By the time we arrive, the motor is seized, the logic board has scorched traces, and the frame itself is often twisted from years of red clay heave. A repair buys you six months, maybe a year. A commercial-grade replacement with new footings and a properly rated drive system buys you a decade. Call (877) 610-2993 and we’ll walk you through the math for your specific property.
Yes, and we do it regularly. Older Norcross swing gates from the 1980s and 1990s often lack safety photocells and edge sensors that UL 325 now requires. We splice retrofit kits into the existing control board when the board is serviceable. If the board is burned out or the wiring is corroded to the point of unreliability, replacement is cheaper and safer than patching. Either way, we quote it upfront, in writing, before any work starts.
Gwinnett County’s red clay expands when wet and contracts when dry, which heaves gate posts out of alignment seasonally. A Norcross swing gate installed with shallow footings will sag within two years. We set post footings deeper than the original builder’s pour, using concrete rated for expansive soil, and we align the hinges to account for the seasonal movement. That’s not a generic installation detail; it’s the difference between a gate that works for twenty years and one that needs realignment every spring.
No. Pedestrian gates cycle less frequently than vehicle gates and don’t carry the same weight. What they need is proper latching, self-closing hinges, and compliant UL 325 entrapment protection. We install pedestrian gates with access control matched to how the townhome actually uses the gate, not a commercial operator sized for a vehicle gate. Call (877) 610-2993 for a free measure and a straight answer on what you actually need.
For an HOA gate running 300+ cycles a day, you need a commercial-grade slide operator rated for continuous duty, not a residential unit spruced up with a bigger motor. We’ve been recommending DoorKing, Viking, and LiftMaster commercial slide operators for Norcross HOAs on the Jimmy Carter Boulevard corridor, paired with new concrete footings and a loop detector that reads vehicle presence correctly. We’ll quote the exact model, the cycle rating, and the installed price before you sign anything.
If you need gate installation in Norcross, call (877) 610-2993. Hal will answer, or someone on the crew will, and we’ll schedule a free on-site estimate for a time that works for you.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Norcross and surrounding Gwinnett County communities since 2001.