Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across New Whiteland
Gate installation in New Whiteland usually runs between $1,800 and $6,500 depending on whether we’re working with a single pedestrian gate, a double driveway swing gate, or a slide gate on an uneven gravel drive. We are out on Tracy Road, Whiteland Road, and the subdivisions off Sheek Road all the time, and we know what these gates face. The clay here heaves, the posts lean, and an operator that worked fine in 1995 was never designed for a keypad or a phone app. We quote a price before we touch anything, and if you call (877) 610-2993, a real person answers, day or night.
Why Gatewood Fence & Gate Is New Whiteland’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and he still runs it the same way: his name is on the door, his address is published, and his license number is there for anyone to check. We don’t hide behind anything. When a gate in New Whiteland has a sagging panel or a dead operator, the person who shows up knows the difference between a bad hinge and a bad post, because he has seen both in this town hundreds of times.
We are not a franchise. We are not a sales team that sends someone out to quote and someone else to install. Hal or his crew does the work, and the same crew that digs the footing is the crew that hangs the gate and wires the operator. Our customers in New Whiteland keep our number because they know we will come back if something is not right, and the 90-Day Done Right Promise is in writing on every job, not buried in an email.
We are also one of the few local gate companies that welds on site. That matters here. New Whiteland has a lot of gates that were built on old steel posts, and those posts don’t match the dimensions of a new aluminum panel. We can cut, weld, and reinforce in your driveway instead of hauling the gate back to a shop, which keeps the job faster and the gate anchored to what is already there when that’s the right call.
How New Whiteland’s Clay Soil and Legacy Posts Change Gate Installation
Here is what we see in the 46184 ZIP that we don’t see in most of Greenwood or Bargersville: gate installation here often means retrofitting a modern operator and panel onto a post that was set decades ago for a farm gate. New Whiteland sits at the edge of Johnson County’s agricultural-to-suburban conversion along the I-65 corridor. When subdivisions grew up around older properties, the fences and gates did not always get replaced. A ranch house built in the 1980s on what used to be farm ground may still have the original tubular steel swing gate hanging on a post that was never meant to carry an automatic opener.
The soil itself is heavy clay. It holds water. In winter, that water freezes, the clay expands, and it grabs the post and shoves it upward just a little. Then spring comes, the ground thaws, and the post settles back, but never exactly where it started. After a few years, the hinge post is out of plumb and the gate drags on the latch side. If the footing was not dug below the frost line and drained with gravel, the gate will lean again next winter no matter how many times you tighten the hinge bolts. We dig new footings to 42 inches or more on every gate we install in New Whiteland, set the post in concrete, and backfill with gravel so water drains away. That is the difference between a gate that stays square and a gate you will be calling about next March.
Off Tracy Road, we replaced a worn 1980s swing gate that had been retrofitted with a vinyl panel onto the original farm post. The hinge post had heaved 2 inches out of plumb, so we dug a new post footing below the frost line, set a properly drained post, and installed a LiftMaster gate operator with safety photocells, correcting a sag that had returned every spring. The homeowner had paid two other companies to fix the gate panel. The panel was never the problem.
Our Gate Installation Services in New Whiteland
Swing Gate Installation
Swing gates are the most common style in New Whiteland, and they are also the ones that suffer most from our freeze-thaw cycles. A double swing gate across a 20-foot driveway puts all the weight on two hinge posts, and if either post moves even an inch, the gates will not meet in the middle. We set new posts below the frost line, hang the gate with welded brackets rated for the panel weight, and then install the operator so it is not fighting the gate. We quote a firm price for swing gate installation, and we stand behind the work with the same 90-Day Done Right Promise we give on every job.
Driveway Gate Installation
A driveway gate in New Whiteland is usually a security gate, a pet gate, or a privacy gate across an entrance that was built when the neighborhood was still open field. Many of these driveways are gravel, and some still have the field-stone surface from the original farm entrance. Standard wheeled hardware binds on those surfaces. We install driveway gates with cantilever designs or overhead-track slides when the ground is uneven, and we will tell you honestly if the cheaper roller option will just be trouble. You get a written quote before any work starts, with no trip charge inside Johnson County.
Sliding Gate Installation
Sliding gates make sense for a lot of New Whiteland driveways because the ground is not flat enough for swing gates. A slide gate rides along a track, and the track is only as good as the base under it. If the base is not compacted gravel with a poured concrete run, the track settles, the gate binds, and the operator burns out early. We poured and compacted bases, set guides, and installed operators from DoorKing, Viking, and Ghost Controls on slide gates all over the 46184 area. A slide gate with a bad base is a repair that will repeat forever. We fix the base first.
Pedestrian Gate Installation
We also install pedestrian gates in New Whiteland, usually as part of a fence gap or a garden entrance. These are lighter, but they fail for the same reasons the big gates fail: the post moves, the latch won’t catch, and somebody starts slamming it. We set pedestrian posts in concrete at the same depth as driveway posts, and we use self-closing hinges and magnetic latches so the gate actually latches without help. A pedestrian gate costs less, but we hang it with the same care, because a gate that does not latch is not doing its job.
Our Gate Installation team handles every one of these, from a single swing gate to a full slide gate retrofit with new operator, safety photocells, and keypad entry.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Legacy Operators and Modern Safety in New Whiteland
A large share of the gates around New Whiteland were hung between 1985 and 2005. The gates themselves are often solid steel and worth keeping. The operators are another story. An operator from the 1990s has an obsolete control board that was never built for modern safety requirements or for keypad entry, loop detectors, or phone control. When a homeowner asks for any of those, the old board usually cannot support it. That pushes the job from repair into full operator replacement, and that is often the smarter long-term move anyway.
We service and install nine major gate brands, including Viking, Ghost Controls, and DoorKing. If your older Mighty Mule or Linear operator still runs, we can often repair it. If the board is gone and replacements are no longer made, we will tell you that plainly, and we will give you a written quote for a new operator that meets current safety requirements. We do not sell operators you do not need, and we never install a new panel on a post that should have been replaced first. Fix the panel without the post and you will fix it twice.
Common Gate Installation Problems We See in New Whiteland Homes
- Frost-heaved hinge posts. The clay under New Whiteland expands when it freezes, and a post set above the frost line tilts a little more each winter. A swing gate that drags in the spring is almost always a post problem, not a hinge problem.
- Obsolete control boards on legacy operators. Homeowners try to add a keypad or a phone app and discover the 1990s-era board cannot support it. Replacing the operator is usually the only workable solution, and it brings the gate up to current safety standards.
- Bottom-roller slide gates on uneven gravel. Driveways along the rural fringes of New Whiteland’s 46184 ZIP still have gravel or field-stone surfaces. Standard wheeled slide hardware binds and tears itself up. Cantilever or overhead-track designs are the only reliable answer here.
- Mismatched panels welded or bolted onto original farm posts. We see modern vinyl or aluminum panels hung on heavy steel posts sunk decades ago. The post spacing doesn’t match the new panel, and the hinge geometry is wrong. Sometimes we can weld adapters and keep the posts. Sometimes the posts have to go. We will show you which one applies before we start.
Pricing for Gate Installation in New Whiteland, IN
Gate installation in New Whiteland runs a real range, and here is the honest version. A single pedestrian gate with a welded steel frame and self-closing hardware typically runs $900 to $1,800. A single driveway swing gate with a steel or aluminum panel, new posts set below frost line, and an installed operator usually runs $2,800 to $5,200. A full double-swing driveway gate across a wider opening runs $4,500 to $8,000 with operator, safety photocells, and controls. A cantilever slide gate for an uneven gravel driveway starts around $5,500 and can reach $9,500 depending on the gate length and whether we are running power to the opener.
These are installed prices, not a lowball to get us to the door. The price we quote is the price you pay, agreed in writing before any work starts. We offer $40 off any repair over $200, a free second opinion on any written estimate from another company, no trip charge inside Johnson County, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near New Whiteland
We work in New Whiteland every week, and we also serve the surrounding Johnson County and southside communities: Greenwood, Franklin, Bargersville, and Beech Grove. If you are just over the line in any of those towns, you get the same pricing, the same 90-Day Done Right Promise, and the same person answering the phone. Read more about what makes local gate service different on our Gate Installation in New Whiteland page.
Serving New Whiteland, IN - Our Local Coverage Area
We’re based in the New Whiteland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in New Whiteland
Because the panel was never the problem. The clay soil under New Whiteland heaves when it freezes, and if the hinge post was not set below the frost line and drained with gravel, the post moves a little every winter. The gate starts to drag, and tightening the panel or swapping hinges does nothing. We dig a new footing to at least 42 inches, set the post in concrete with drainage, and the sag stops starting. Call (877) 610-2993 and we will look at the post, not just the panel.
Sometimes yes, often no. If the original steel posts are still plumb and solid, we can weld adapter plates or new hinge brackets and hang a modern panel on them. But if the posts have heaved out of plumb or the steel is rotting at grade, keeping them means the new gate will sag within a year. We will show you which way the post sits with a level before we quote, and we will not sell you posts you don’t need.
Usually not. Standard slide gates ride on bottom rollers, and rollers bind on uneven gravel or field stone. The gate jerks, the operator works too hard, and the rollers tear up. The reliable options are a cantilever slide gate, which hangs above the ground, or an overhead-track design. Both cost more than a wheeled slide gate, but they work here, and that is what actually matters on a gravel driveway in New Whiteland.
Almost never. Operators from the 1990s have control boards that cannot support current safety photocells, keypads, or phone control, and they were not built to meet today’s entrapment-protection standards. If you want modern controls, you need a new operator. We install LiftMaster, DoorKing, Viking, and Ghost Controls operators, and we will quote the replacement honestly before touching anything.
At least 42 inches, and it needs a gravel drain bed under and around the concrete. The frost line in Johnson County runs around 36 to 40 inches, and the clay here holds water, so going a little deeper and providing drainage is the only way to keep the post from moving. Our installs get the full depth, every time, no shortcuts. Call (877) 610-2993 for an exact quote - estimates are free.
Call Gatewood Fence & Gate for Gate Installation in New Whiteland
If you have a gate that sags, a driveway entrance that needs a new gate, or an old operator that won’t run a keypad, call us at (877) 610-2993. A live person answers, 24/7. We will set a time, show up in the window we promised, and give you a written price before any work begins. Hal Gatewood has been at this since 2001, and his name is on the shop and on every invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving New Whiteland and Johnson County since 2001.