Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across New Baltimore
Gate installation in New Baltimore runs $1,400-$6,800 for most homes, and a driveway gate on a lakeside lot near Anchor Bay typically lands between $2,900 and $4,600 with the operator included. Hal Gatewood’s crew serves every corner of the 48047 and 48051 ZIP codes, usually arriving at your home within the same week you call for a measure and written price. If your post footings have heaved, your old operator is dead, or you’re starting from scratch on a new build, call (877) 610-2993 and a real person picks up, night or day.
What makes gate work in New Baltimore different from the rest of Macomb County is the bay. We’re on Anchor Bay, and that water does things to steel that inland towns like Chesterfield Township never see. The humidity gets into control boards, the saturated soil shoves posts around, and gates put in ten years ago often have components that have rusted through twice already. We plan for that from day one, because around here it’s not a question of if the moisture gets in; it’s a question of how soon.
Why Gatewood Fence & Gate Is New Baltimore’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop, the invoice, and every gate we install between Anchor Bay and I-94. He has been doing gate work since 2001, and that means something around here: homeowners see the same face from first quote to final weld, not a rotating cast of faces from some outfit two states over. We publish our address and license number so anyone can look us up before they call. That’s the kind of accountability that older New Baltimore homeowners tell us they were looking for after a national company burned them once already.
New Baltimore customers give us a strong local reputation, and we wear it carefully. The crew that works the anchor Bay neighborhoods knows which subdivisions were built through the 1990s and 2000s, which ones have ornamental aluminum gates from original construction, and which older lots near the historic downtown have masonry posts from the mid-20th century that have not moved in fifty years and likely need to be reset rather than shimmed. That local knowledge saves you money, because we don’t recommend work the property doesn’t require.
We answer the phone with a live person around the clock. Not a voicemail. Not a queue. And every installation carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no fine print.
Our Gate Installation Services in New Baltimore
Swing Gate Installation
Swing gates are the most common kind we install around Anchor Bay, and for good reason: they suit the ornamental aluminum and wrought-iron aesthetics that New Baltimore subdivisions leaned into during the 1990s and 2000s build-out. But a swing gate only performs as well as its hinge post, and in New Baltimore that post has to be set below frost line with an oversized footing. The freeze-thaw cycle here is aggressive enough that shallow footings heave within two winters, racking the gate frame and throwing the opener out of travel alignment by spring.
Driveway Gate Installation
A driveway gate on a New Baltimore lot does double duty: it keeps the driveway private and it tells a story about the house. Lots along the Anchor Bay corridor are often narrower than inland parcels, so we measure carefully to keep the gate swing radius off the street and clear of the mailbox and utility boxes. For double-wide drives we typically build a double gate, and we can stabilize both meeting ends with steel reinforcement rather than letting them sag into each other after five Michigan winters.
Pedestrian Gate Installation
Pedestrian gates alongside a driveway gate are common in New Baltimore, especially on waterfront lots where foot traffic moves between the street and the dock. The hardware on a pedestrian gate takes the same bay humidity beating as the big gate’s, so we use galvanized hinges and stainless latches rather than uncoated steel. It’s a small choice that adds years before the corrosion starts. If you’re also putting in a security keypad for the walk gate, we can run it off the same operator as the driveway gate so one code opens both.
Security Gate Installation
Security gates in New Baltimore get installed for two reasons: privacy from the road, and control over who drives onto the property. On the waterfront lots, the second reason matters more than the first, because a gate is often the only thing between the street and a boat trailer parked behind the house. We install Gate Installation systems with photo-eyes, edge sensors, and modern UL 325 entrapment protection, and we can layer on a keypad or vehicle loop so the gate opens for you without any fuss.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in New Baltimore
We’re certified to service nine major gate brands, and around New Baltimore we end up working on Linear and DoorKing more than most, because builders specified them heavily during the 1990s and 2000s housing expansion. For newer installs we lean toward LiftMaster sealed control boards, which hold up better against Anchor Bay humidity than open-chassis boards. When we install a Viking or Ghost Controls unit for a New Baltimore homeowner, we keep common replacement parts in the truck, so a repair call doesn’t turn into a two-week parts wait. That matters here, because the moisture means you won’t always get five years out of a board, even one that would last a decade inland.
Common Gate Installation Problems We See in New Baltimore Homes
- Heaved post footings. Anchor Bay’s saturated soil holds moisture deep into spring, and the freeze-thaw cycle shoves post footings out of plumb faster than any inland Macomb subdivision. New installs need footings dug below frost line and set in concrete that extends wider than the post base.
- Corroded control boards and motor housings. The bay’s humidity infiltrates enclosures that would stay dry in Chesterfield, and board failures show up as tripped photocells, dead keypads, and motors that run but won’t move the gate. We specify sealed enclosures and corrosion-resistant connectors for every New Baltimore job.
- Older gates without modern entrapment protection. Ornamental aluminum gates installed before UL 325 standards became law often lack photo-eyes or edge sensors. Retrofitting those onto an existing gate is usually cheaper than replacing the whole gate, and it brings the installation up to code.
- Sagging frames from tired hinge posts. A gate sags in the hinge post, not in the middle, and on New Baltimore’s older homes the original posts are often timber or unreinforced masonry that has settled and shifted for decades. We fix the post and rehang the gate, instead of welding a band-aid onto the middle of the frame.
Pricing for Gate Installation in New Baltimore, MI
Here’s what gate installation actually costs in New Baltimore, based on the jobs we quote around this ZIP codes every week:
- Pedestrian gate with hardware: $850-$1,800 installed, depending on gate width and whether we’re setting a new post or reusing a solid existing one.
- Single swing driveway gate with operator: $2,900-$4,600, including the gate, the post, the operator, and the two remotes.
- Double gate or sliding gate with operator: $4,200-$6,800. Sliding gates add cost because the track and roller assembly have to be set dead level every time, and Anchor Bay soil moves too much for shortcuts.
- Security gate with keypad or vehicle access: add $600-$1,400 to the base gate price, depending on access control complexity.
Every quote is the price you pay. The number is agreed and written down before any work starts, and we never leave a job with an invoice bigger than the quote. Our estimate is free, and inside Macomb County there is no trip charge to come look at your site. We also offer a permanent 10% discount for seniors and veterans, from measure to final weld.
We Also Serve Cities Near New Baltimore
Our Gate Installation in New Baltimore team runs calls up and down the Anchor Bay shoreline and throughout Macomb County. Most weeks you will find us driving between Mount Clemens, Clinton Township, Fraser, and Sterling Heights, often on the same day. If you are a little outside the 48047 and 48051 ZIP codes, call anyway: a live person answers and will tell you straight whether we can get to you.
Serving New Baltimore, MI - Our Local Coverage Area
We’re based in the New Baltimore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in New Baltimore
We set hinge post footings at least 42 inches deep in New Baltimore, which is below the frost line for this part of Michigan, and we pour them wider than the post base. Anchor Bay’s saturated soil means a standard 36-inch footing can heave within two winters, so deeper and wider is the standard call here, not an upsell. Call (877) 610-2993 for a free site measure and an exact footing recommendation for your lot.
Yes, in most cases we can. A pre-UL 325 ornamental gate can usually accept photo-eyes and edge sensors without replacing the gate itself, and that retrofit runs far less than a full gate replacement. We will tell you straight if the existing frame is too far gone to justify retrofitting, but around Anchor Bay we see plenty of older gates with solid frames and nothing wrong except missing safety hardware. Call (877) 610-2993 and we will look at it free.
The bay keeps the air persistently humid, and that moisture infiltrates motor enclosures and control boards that were built for drier conditions. Around New Baltimore we routinely see boards fail within three to five years that would run a decade in Sterling Heights. The fix is a sealed enclosure and a board specified for damp environments, and that’s our standard practice for every install we do on the waterfront side of 48047.
Most sloping New Baltimore lots are better served by a swing gate, because a sliding gate needs flat, stable ground for the entire track run, and the grade toward Anchor Bay often drops too much for a clean slide without significant regrading. If you prefer a slide gate and your slope is modest, we can install it, but on the typical waterfront lot a swing gate costs less and performs more reliably. Call (877) 610-2993 and we will measure your grade and tell you which one makes sense.
We check the hinge post. In New Baltimore, a gate that won’t close usually has a post that has heaved or settled out of plumb, and once that post moves the whole gate hangs wrong and the operator’s travel limits are suddenly off. We look at the post before we touch the opener, because fixing a gate without fixing the post means you will fix it twice. Call (877) 610-2993 for a free second opinion on any written estimate you already have.
Call Gatewood Fence & Gate for Gate Installation in New Baltimore
If you live in New Baltimore and your gate is old, sagging, or gone altogether, call (877) 610-2993. Hal or someone from his crew will answer live, set a time to measure your site, and give you a written price before any work starts. We serve every street from the Anchor Bay waterfront to the 48051 ZIP line, and our 90-Day Done Right Promise is on paper, not in a sales pitch. You’ll see the same truck, the same face, and the same standard of work on every visit. That’s the point of hiring someone whose name is on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving New Baltimore since 2001.