Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mustang
Gate installation in Mustang runs $1,800 to $6,500 for most driveway gates, with pedestrian gates typically landing between $700 and $2,200. The real questions are which style fits your lot, whether the posts will survive Canadian County clay, and who actually shows up to do the work. That’s where we come in. Gatewood Fence & Gate has been owner-operated since 2001, and when you call (877) 610-2993, a live person answers, any hour, any day. Not a recording. Not a queue. Hal Gatewood’s name is on the shop, and his crew serves Mustang every week.
Key Takeaways
- A new driveway gate in Mustang typically costs $1,800 to $6,500 installed, depending on material, size, and opener.
- Mustang’s red clay soil heaves posts out of plumb within a few wet-dry cycles, so proper footing depth and drainage matter more here than in most nearby cities.
- Every job includes the 90-Day Done Right Promise in writing, plus free estimates and upfront pricing agreed before any work starts.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers.
Why Gatewood Fence & Gate Is Mustang’s Preferred Gate Installation Company
Mustang has grown fast. A lot of the houses built in the last twenty years came with gates that looked fine on closing day and started sagging by the second spring. We’ve seen it in the neighborhoods off Highway 152, around Wild Horse Park, and throughout the 73064 zip code. The pattern is almost always the same: a post set in fast-set concrete with no drainage, sitting in clay that swells and shrinks through every wet spring and dry summer. The gate panel itself is usually fine. The footing is not. Hal has been fixing and installing gates since long before Mustang’s building boom, and he’ll tell you plainly what needs to be done and what doesn’t.
Mustang homeowners call us because we show up when we say we will, and because the estimate we hand you is the price you pay. No surprises at the door. Our crew is background-checked and uniformed. We work on nine major gate brands, so whether your Mustang home came with a Viking opener, a Ghost Controls board, or an Elite swing arm, we know the wiring and we stock the parts locally. Dispatch and scheduling run through our Oklahoma City office, but the people who do the work drive into Mustang every week, and they know the streets.
We also stand behind what we install. Every single job carries the 90-Day Done Right Promise, stamped in writing. If it isn’t done right, one call brings us back. No runaround, no fine print. That is the oldest kind of accountability there is, and it hasn’t gone out of style.
Our Gate Installation Services in Mustang
Driveway Gate Installation
Driveway gates in Mustang are usually 12 to 16 feet wide and built from ornamental iron or wood to match the subdivision’s fence line. A solid wood infill gate is beautiful, but it catches a lot of wind. In Canadian County, where straight-line winds over 60 mph blow through every spring, that wind load lands directly on the hinges and the post. We size the posts, the footings, and the hinge hardware for that load from day one. A typical driveway gate installation in Mustang runs $2,800 to $6,500 with an operator, and the price is agreed before we start.
Pedestrian Gate Installation
Side-yard and walk-through gates are the most common projects we do in Mustang. Most of them are 3 to 4 feet wide, built to match a 6-foot wood or vinyl privacy fence. The tricky part is the latch. On Mustang’s clay, a post that shifts just half an inch makes the latch miss. That’s why we set pedestrian gate posts deeper than code minimum and add gravel drainage under the footing. A new pedestrian gate in Mustang typically runs $700 to $2,200 depending on material and hardware.
Swing Gate Installation
Swing gates are the most common drive gate in Mustang, particularly double swing gates across wider driveways. They’re subject to two problems here: red clay heave and wind loading on the panels. A double swing gate is only as good as its center post and its hinge posts. If the hinge post rocks, the gate sags and the leaves start to fight each other. We weld and fabricate on site, so if a custom swing gate needs reinforcing or a hinge plate relocated, we do it in the driveway instead of hauling it off. Swing gate installation in Mustang generally runs $2,200 to $5,800.
Double Gate Installation
Double gates across a wide driveway are the hardest-working gates on a Mustang property. They handle twice the wind surface of a single gate, and they also carry the additional stress of the center meeting point. In Mustang’s mid-2010s subdivisions, we regularly see double gates where the center latch has drifted out of alignment because both outer posts have tilted inward, each in its own direction. The fix usually requires resetting the posts and re-plumbing the leaves. Double gate installation here runs $2,800 to $6,500, including the operator when needed.
We also handle sliding gates, security gates, and gate operators of every type. If you’re not sure which style fits your lot line, your HOA, or your driveway slope, call us and we’ll walk you through it. And if you’re in Mustang, you already know your ground. Let’s build for it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mustang
Most Mustang homes with automatic gates have operators from a handful of brands. We’re certified on all of them: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because when a Viking arm fails or an Elite board shorts out, you don’t want to hear that the installer only works on one brand. We keep common parts and circuit boards in stock for Mustang customers, which means faster turnaround when a storm knocks out an operator. And because we install and repair all of these brands regularly, we can tell you which ones hold up best on Mustang property, and which ones we’d skip.
Common Gate Installation Problems We See in Mustang Homes
- Gate posts heaving out of plumb in the clay. Canadian County’s red clay swells hard after wet springs and shrinks just as hard in dry summers. Posts set with a single tube of fast-set concrete start rocking within two or three cycles, and then the latch misses by an inch.
- Wind-twisted wood infill gates. Mustang sits in the severe thunderstorm corridor where straight-line winds regularly blow over 60 mph. A solid wood gate is a sail. Cheap spring hinges snap, slide-bolt latches shear off, and the panel twists permanently out of shape.
- Ice-storm latch jams on swollen wood. Winter ice storms in central Oklahoma soak the wood and then freeze it. The gate swells, the slide bolt binds, and the first hard yank bends the latch or rips the mounting screws out of the stile.
- Operators failing after storms. When lightning takes out the power or a surge hits the controller board on an automatic gate operator, the gate either stops responding or the safety eyes start reading false obstructions. We see this every spring and early summer in Mustang.
One more thing worth knowing: the age of Mustang’s housing stock hides a lot of these problems. A gate that’s only six or seven years old looks fine from the street. But the footing was likely minimal, because the builder wasn’t thinking about clay movement or wind load. So the failure shows up quickly, usually at the post, not at the gate panel. Show me the gate closing on its own and I’ll show you where it’s failing. That is where we start.
Why Mustang’s Soil and Weather Make Gate Installation Different
Mustang’s post-2000 subdivisions sit on Canadian County’s expansive red clay, and that clay is the single biggest reason gates fail early here. It absorbs water like a sponge in the spring, swells, and moves everything above it. Then it dries in the July heat, contracts, and leaves gaps around the footing. The post rocks. The gate sags. The latch misses. A few wet-dry cycles, and a gate that was installed just two years ago is dragging on the ground or swinging crooked. The same problem is far less severe in cities closer to the river bottoms, where the soil is sandier and drains better. If you live in Mustang, you know exactly what I’m talking about: you’ve seen the cracked sidewalks, the shifted fence lines, the gates that don’t latch anymore.
Then there’s the wind. Mustang’s position southwest of Oklahoma City puts it in a well-documented tornado-track zone, and every spring brings straight-line winds that test every gate on the block. A solid wood infill gate catches that wind like a wall. The hinge posts bear the full load, and if the footing is shallow, the post starts to lean the first season. After two or three wind events, the gate twists, the hinges bind, and the operator starts laboring. In many cases we can repair the gate and reinforce the posts without replacing the panel. In others, the panel was never built for this climate and the right move is to install a gate that is.
We saw this up close in a Mustang subdivision off 73064. A double swing gate had begun sagging at the hinge post after a wet spring. The post had rocked loose in saturated clay, and the lag bolts had pulled halfway out. We reset the post in a deeper footing with gravel drainage underneath, re-plumbed both leaves, and installed a LiftMaster operator with keypad entry. The sag correction held through the next spring storm season, including a few nights of straight-line winds. That’s what building for Mustang means.
Pricing for Gate Installation in Mustang, OK
Here are honest numbers for Mustang’s market. A pedestrian gate installation runs $700 to $2,200. A single swing drive gate runs $2,200 to $4,500. A double swing gate runs $2,800 to $6,500 installed, including the operator when you want one. Sliding gates land on the higher end because of the track and motor work, usually $3,500 to $6,000. These are installed prices, fully built, with the posts set correctly for Mustang’s soil.
What moves the number is material, width, operator type, and whether the existing posts can be reused. Most times in Mustang, the posts cannot be reused. They were set too shallow, and reusing them would mean installing a new gate on a failing foundation. We won’t do that, and we’ll explain why. The price you’re quoted is the price you pay, and it’s agreed before any work starts. Estimates are free, and there’s no trip charge inside Canadian County. Call (877) 610-2993 for an exact quote.
What to Do With Your Automatic Gate During a Power Outage in Mustang
Every automatic gate operator we install in Mustang includes a manual release. On most LiftMaster, Viking, and Elite models, there’s a release handle or key on the motor housing. Pull it, and the gate swings or slides freely by hand. Here’s the safe sequence: disconnect the operator, position the gate where you want it, and if you’re in the middle of a storm, secure the gate with a chain or drop bar so wind doesn’t slam it around. Do not force a gate that’s fighting the operator. That’s how people break their own hands. If you’ve lost power and your operator won’t disengage, call us. This is an emergency in Mustang, and we answer the phone at any hour.
We Also Serve Cities Near Mustang
If you’re in Yukon, Tuttle, Bethany, or Warr Acres, we cover those areas too. We’re the local Gate Installation crew for the whole Canadian County corridor, and we drive these roads every day. For everything about our work in Mustang, this page is your starting point.
Serving Mustang, OK - Our Local Coverage Area
We’re based in the Mustang area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Mustang
The sag is almost always in the post, not the panel. Mustang’s red clay swells when it’s wet, and that pushes shallow-set posts out of plumb. Within two or three wet-dry cycles, the post rocks and the gate drops. Fix the panel without the post and you’ll fix it twice. Our fix is to reset the post deeper with gravel drainage and re-plumb the gate, and for a precise assessment of your gate, call (877) 610-2993.
A solid wood infill gate built with standard hardware will start failing at sustained winds around 50 to 60 mph, which is a common spring afternoon in Mustang. The failure point is usually the hinge screws pulling from the post or the post itself leaning. We build and reinforce for wind loads above 70 mph because that’s the reality of living in the Canadian County corridor. If your gate has already twisted or the hinges are loose, call us and we’ll tell you whether it’s repairable.
Pull the manual release on the operator so the gate swings or slides freely by hand, then secure it with a chain or drop bar if high wind is coming. Don’t fight the motor; that’s how fingers get broken. If the release won’t disengage or the gate is stuck, call us any hour at (877) 610-2993 and a live person will answer.
Yes. Most Mustang subdivisions governed by HOAs require specific materials, colors, or hardware, and we install to those standards regularly. We’ll review your HOA’s written requirements with you before we order materials or schedule the work. If your HOA has specific hardware and material specs, we can match them. Call (877) 610-2993 and we’ll walk your project through it.
One of two things happened: the hinge post tilted in the clay, or the gate panel twisted from wind load. Both are common in Mustang’s post-2000 subdivisions, where production builders set gate posts with minimal concrete. The fix is a post reset and re-plumb, usually with a deeper footing. We do this work weekly in Mustang. The repair cost is almost always far less than a new gate, and the first step is a free estimate.
Call Gatewood Fence & Gate for Gate Installation in Mustang
If you live in Mustang and need a new gate installed, an old one re-plumbed, or an operator that actually works after a storm, call us. You’ll get a live person, a straight answer, and a written price before any work starts. Hal Gatewood’s been doing this since 2001, and the 90-Day Done Right Promise comes with every job. Reach us at (877) 610-2993 for a free estimate. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mustang since 2001.