Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mitchellville
Gate installation in Mitchellville, MD typically runs $2,800-$11,000 depending on the gate style, operator type, and what’s happening with the existing posts. That’s a real number, not a teaser. We’ve been installing driveway gates, pedestrian gates, and security gates in the 20716 ZIP code long enough to know that most Mitchellville properties aren’t starting from a blank slate. They’re starting with a 1990s brick pillar entry and an operator that’s been limping along for five years longer than it should have. If you’re reading this because your gate quit, call (877) 610-2993 and Hal or one of the crew will answer. Not a menu. A person.
Why Gatewood Fence & Gate Is Mitchellville’s Preferred Gate Installation Company
We’re locally owned and owner-operated, and Hal Gatewood’s name is on the shop and on every invoice. That matters in Mitchellville because so many of the gates we work on were installed in the late 1980s through early 2000s, when the subdivisions were first built. The original installers are long gone. The national companies that bought out those local shops don’t stock parts for Eagle Access underground operators anymore. We do our own welding on site, which means a gate that sags or a hinge post that’s out of plumb gets fixed in your driveway, not hauled off to some shop across the county line.
We answer calls 24/7 with a live person. Not a voicemail, not a chatbot, not a dispatch queue three states away. When you call about a failed gate operator on a Kingsford subdivision double swing gate, you talk to someone who knows what a Kingsford subdivision gate looks like. And every job, from a simple operator swap to a full custom gate installation, carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
Mitchellville homeowners in the 50-70 range have told us the same story for years: they called a big company, got a price on the phone, and then watched the number climb once the crew showed up and “found complications.” We quote the price before any work starts. You agree to it, we do the work, the invoice matches the quote. That’s the whole system. Seniors and veterans get a permanent 10% discount. We also offer $40 off any repair over $200, no trip charge inside Prince George’s County, and a free second opinion on any written estimate. Bring us a competitor’s quote and we’ll look at it honestly.
Our Gate Installation Services in Mitchellville
Driveway Gate Installation
Large lots and long driveways off Mitchellville Road and Lottsford Vista Road are the norm here. A driveway gate installation in Mitchellville often means working with existing brick pillars, setting new post footings deep enough to survive the freeze-thaw cycle, and sizing an operator that can move a heavy ornamental iron gate without straining. We measure, fabricate, and install the whole assembly, including underground operators where the driveway layout calls for them. A typical driveway gate in this area runs $3,500-$8,500 installed.
Pedestrian Gate Installation
Plenty of Mitchellville properties have a separate walk gate beside the main driveway entry. These get more use than the driveway gate and fail first. We fabricate and hang matching pedestrian gates, set new hinge posts when the old ones have rusted at the base, and add self-closing hardware and maglocks where HOA covenants require controlled entry. Pedestrian gate installation in Mitchellville generally falls between $1,200 and $2,800, depending on whether we’re working with an existing brick opening or setting new posts.
Sliding Gate Installation
Some newer Mitchellville estates built in the early 2000s use sliding gates on steel track or cantilever systems, especially where the driveway slopes. We install both styles and cut the cantilever rollers and guide hardware to the specific weight of your gate. Sliding gates demand flatter ground and a properly poured concrete track bed, which some of the older subdivisions didn’t always get right the first time. Sliding gate installation in Mitchellville typically costs $3,800-$9,500 complete with operator.
Swing Gate Installation
Swing gates are the signature of Mitchellville’s HOA subdivisions. Double swing gates on brick pillar entries, single swing gates on masonry columns, ornamental iron and aluminum. The challenge is always the hinge post. If the post is out of plumb by even half an inch, the gate will bind, the operator will fight it, and you’ll burn out motors every few years. We set new posts, rehang leaves, and mount operators that match the gate’s actual weight and arc. A single swing gate installation here starts around $2,800; a double swing gate with new posts and dual operators runs $6,000-$11,000.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mitchellville
We service and install FAAC, BFT, Linear, and Viking operators, plus LiftMaster, DoorKing, Elite, Mighty Mule, and Ghost Controls. For Mitchellville specifically, we keep FAAC and Viking underground operator parts on hand because those are the direct replacements for the old Eagle Access and early LiftMaster SL units that were installed here in the 1990s. When a Mitchellville customer calls about a dead underground operator, we can usually have the replacement on the truck that same day, not two weeks out waiting on a backorder.
Common Gate Installation Problems We See in Mitchellville Homes
- Freeze-thaw heaving in post footings. Prince George’s County winters push concrete footings up and down just enough that, over 20 or 30 years, the hinge post drifts out of plumb. The gate leaf starts dragging, the operator strains, and eventually the motor burns out. The fix is a new footing and post, not another motor.
- Unsupported 1990s underground operators. Eagle Access and early-generation LiftMaster SL operators from the original construction era aren’t supported by manufacturers anymore. When the motor fails, there are no parts. The job becomes a full operator swap, usually to a FAAC or Viking unit sized for the existing gate.
- Rust pitting at weld points and bottom rails. Summer humidity in this part of Maryland eats ornamental iron at the welds, especially along the bottom rail where water sits after rain. By the time you see rust through the paint, the gate usually needs re-welding or a new panel, and often a new hinge post while we’re at it.
- Double gates out of sync. Two leaves on one opening means two operators or a master-slave linkage, and when one side lags, the whole gate fights itself. We see this constantly in HOA subdivisions where the original installation used a single underground operator to drive both leaves through a chain link, an approach that was never strong enough for ornamental iron of this weight.
Pricing for Gate Installation in Mitchellville, MD
Here are honest numbers for the 20716 ZIP code. A new single swing driveway gate with operator runs $2,800-$5,500. A double swing gate on existing brick pillars, rehung with new hinges and modern operators, lands between $6,000 and $9,000. A sliding gate on a poured track bed starts around $3,800 and goes to $9,500 for heavier ornamental work. Custom fabrication, especially matching existing iron scrollwork, adds $800-$2,500 depending on the design. Underground operators, which many Mitchellville entries require because there’s no room for a post-mounted arm, add $1,500-$3,000 over the gate itself. Every quote is written and agreed before work starts. You’ll never get a surprise invoice. Call (877) 610-2993 for a free estimate and a straight answer.
We Also Serve Cities Near Mitchellville
Our Gate Installation team covers Mitchellville and the surrounding area, including Davidsonville, Lake Arbor, Bowie, and Crofton. If you’re in one of those communities and your gate has quit, the same crew that works in Mitchellville will handle your job. Same live phone answer, same 90-Day Done Right Promise, same pricing before work starts. We know this part of Prince George’s County, and we know the gates that were built here in the last 30 years.
Serving Mitchellville, MD - Our Local Coverage Area
We’re based in the Mitchellville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Mitchellville
Because the original operators installed in Mitchellville’s late-1980s to early-2000s subdivisions are now 25-35 years old, and many of them are Eagle Access or early LiftMaster SL underground units that manufacturers no longer support. A service call that starts as a motor repair almost always becomes a full operator swap because the parts simply don’t exist. We keep FAAC and Viking underground replacements stocked for exactly this reason. Call (877) 610-2993 and we’ll tell you straight whether a repair is worth doing or a replacement is the honest answer.
Every winter, water in the soil around post footings freezes and expands, then thaws and contracts. Over years, that cycling heaves the concrete footing enough to push the hinge post out of plumb. A post that’s off by as little as half an inch will bind the gate leaves and strain the operator. The fix is setting a new footing below the frost line with proper drainage so water doesn’t pool at the base. In Mitchellville we regularly saw post footings from the original construction heaving after 20-30 years, so we now pour deeper footings and use gravel drainage beds beneath every new gate installation.
Yes. Modern underground operators from FAAC, Viking, and BFT are direct replacements for the old Eagle Access and early LiftMaster SL units, and they’re built to handle the weight of heavy ornamental iron gates. We recently replaced a mid-1990s Eagle Access unit on a brick pillar entry in the Kingsford subdivision. The original posts were out of plumb, so we set a new footing, rehung the double gate leaves, and installed a FAAC underground operator with new loop detectors and safety photocells. The gate clears its full arc smoothly now. An underground operator replacement in Mitchellville runs $2,500-$4,800 installed, depending on the gate weight and required safety upgrades.
Prince George’s County enforces UL 325 safety standards on automatic gates, which means two forms of entrapment protection: photocells or contact edges on the gate itself, plus a secondary device like reversing loop detectors or a monitored safety edge. Most 1990s-era Mitchellville gates were installed without these, or with photocells that have long since failed. A new gate installation in Mitchellville must include current safety devices, and we handle that on every job, including proper signage where HOA covenants require it.
The gate sags in the hinge post, not in the middle. If the post has moved or rusted through at the base, rehanging the panel on the same post means you’ll fix it twice. We cut the old post free, set a new one with a proper below-frost-line footing, weld fresh hinge barrels in place, and rehang the leaves. This usually means re-pinning both sides so the gates meet square in the center. A double swing gate rehang with new hinge posts in Mitchellville generally runs $3,000-$5,500 before operator work, and we’ll show you exactly what’s needed before any cutting starts.
Contact
If your Mitchellville gate is dead, sagging, or just making a grinding noise every time it cycles, call (877) 610-2993. You’ll get a live person, a straight answer, and a free estimate with the price locked before any work begins. We install and repair gates across the 20716 ZIP code, from the Kingsford subdivision to the estates off Mitchellville Road. Our address is published, our license is public, and Hal’s name is on the shop. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mitchellville and surrounding communities. Hal has been welding and installing gates since 2001, and the 90-Day Done Right Promise is his word on every job.