Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Miami Beach
Gate installation in Miami Beach runs $1,800 to $7,400 for a standard residential swing or slide gate with operator, and most jobs take one to two days on site. That’s the honest range we quote before any work starts, and it’s the number we stand behind. We’ve installed gates across South Beach, the Venetian Islands, North Bay Road, and Biscayne Point, so we know what this salt air does to metal and what it takes to keep a gate running when the king tides roll through.
If you’re on the fence about whether to get Gate Repair - Miami Beach or replace a gate that’s been fighting the ocean for twenty years, call us at (877) 610-2993. We’ll tell you straight what’s worth saving and what is not.
Why Gatewood Fence & Gate Is Miami Beach’s Preferred Gate Installation Company
We’re the shop that shows up with a welder in the truck for Gate Parts & Welding - Miami Beach and the owner’s name on the invoice. Hal Gatewood has been at this since 2001, and he still walks job sites in Miami Beach himself. When you call, a live person answers. Not a menu, not a callback, not a chat window. That matters when your gate is stuck open at 11 p.m. and the only thing between Biscayne Bay and your courtyard is fresh air.
Miami Beach homeowners call us because we understand what this island does to gate hardware. We’ve pulled control boards out of flooded ground boxes in Sunset Islands, replaced rotted hinge posts on La Gorce, and handled Miami Beach Gate Access Control retrofits on ancient swing gates on Palm Island. Our 90-Day Done Right Promise is written on every job: if it is not done right, one call brings us back. No runaround, no fine print.
We’re locally owned, owner-operated, and when you ask for Hal, you get Hal. The shop answers 24/7, and our crews serve Miami Beach directly from our South Florida office. Pricing is upfront. We quote the job, you approve it, and you’ll never be surprised at the door.
Our Gate Installation Services in Miami Beach
Every installation we do in Miami Beach starts the same way: we look at the post, not just the panel. A gate sags in the hinge post, not in the middle, and that is where we start. Here’s how we handle the most common requests.
Driveway Gate
A new driveway gate in Miami Beach typically runs $2,400 to $7,400, depending on width, material, and operator type. We install steel, aluminum, and wrought-iron gates across the island’s residential streets, from Art Deco-era homes off Meridian Avenue to newer builds on the water. Salt exposure means we set posts in deeply bedded galvanized footings and spec marine-grade hardware from day one.
Pedestrian Gate
Pedestrian gates are the quiet workhorse of Miami Beach properties. We install them alongside driveway gates or as standalone entry points for courtyards and pool areas. Expect $800 to $2,500 for a quality hinge-and-latch or automated pedestrian gate. The bigger issue here is alignment: in a place where ground shifts with every king tide, a pedestrian gate that scrapes today will not swing at all by August.
Sliding Gate
Sliding gates are common on Miami Beach’s narrower lots, where there is no room for a gate to swing inward or outward. A new sliding gate with operator in Miami Beach usually falls between $3,000 and $7,000. Sliding gates live or die on their track and motor. We mount operators on raised plinths wherever a property sits low enough to take on water, because a submerged control board is a three-year lifespan, and we do not sell gates with a three-year lifespan.
Swing Gate
Swing gates remain the most popular choice in Miami Beach, especially for the 1920s and 1930s properties that define South Beach and the North Bay Road corridor. A single swing gate with operator starts around $1,800; a double swing gate typically runs $3,500 to $6,800. The old coral rock and concrete footings under these historic gates are often cracked, which means a proper install means new steel-reinforced footings before the first hinge goes on.
Double Gate
Double gates are the standard for wider driveways on the Venetian Islands and along Pine Tree Drive. We install double swing and double slide configurations, with operators synchronized so both leaves move without fighting each other. For Miami Beach, we favor operators with sealed control compartments and battery backup, because when the power flickers during a storm, your gate should still let you in.
No matter which gate type fits your property, you can read more about how we work on our Gate Installation page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Miami Beach
We’re certified to service and install operators from nine major manufacturers, and we keep a working stock of parts for the ones Miami Beach homeowners actually have. That includes Linear and DoorKing slide gate operators, which show up on a lot of older barrier-island driveways, plus Viking and Ghost Controls swing gate systems we see regularly in South Beach and the North Beach neighborhoods. When a control board fails and you need a replacement, we’re not waiting on a warehouse in another state. We carry what we can locally and we’re honest when a part is no longer made.
Common Gate Installation Problems We See in Miami Beach Homes
- Control boards fried by salt water. Ground-mounted slide gate operators on low-lying streets get submerged during king tides and pump-station overflows. The board corrodes from the inside out, and by the time the gate stops moving, the damage is done. We mount replacements on raised plinths and use sealed or marine-grade housings.
- Sagging wrought-iron swing gates. Those ornate 1920s and 1930s gates in the Art Deco district are beautiful, but the original concrete footings have cracked from decades of tidal soil movement. The hinge post rots, the gate leans, and the panel scrapes the pavers. Fix the panel without the post and you’ll fix it twice.
- Obsolete operators without photo-eyes. A surprising number of Miami Beach gates predate modern UL 325 safety requirements. No photo-eyes, no entrapment protection, no compliant reverse mechanism. Some legacy control boards simply cannot be retrofitted safely, and in those cases replacement is the only responsible answer.
- Rust at every hinge and seam. The humidity here sits above 70% almost year-round, and the salt air comes from both Biscayne Bay and the Atlantic. Gate hardware that might last a decade on the mainland commonly fails in four to six years here. We install stainless or galvanized fasteners as standard, never plated hardware that starts flaking after one hurricane season.
Pricing for Gate Installation in Miami Beach, FL
A typical single swing gate installation in Miami Beach runs $1,800 to $3,400 for the gate and operator, while a double swing gate with synchronized operators runs $3,500 to $6,800. Sliding gates start around $3,000 and top out near $7,000 for wide or heavy application. Pedestrian gates fall between $800 and $2,500. The variables that move the price: gate width, material thickness, whether your posts can be reused or need new footings, and whether the site floods enough to require an elevated motor mount. We quote the full job in writing before any work starts. That price is the price. Call (877) 610-2993 and we’ll come out, measure, and give you a written number. Estimates are free.
We Also Serve Cities Near Miami Beach
We work across Miami-Dade, and if you’re outside Miami Beach proper, we likely have you covered too. The same Gate Installation team that handles Miami Beach jobs also serves Isle of Normandy, North Bay Village, Miami, and Miami Shores. We cover the full island and across the causeways into the neighborhoods right around us.
If you’re in one of those areas and want to know more about what we do closer to home, you can read about our work for Gate Installation in Miami Beach and throughout South Florida.
The Fisher Island Gate Problem Nobody Talks About
Fisher Island, ZIP 33109, is the only residential gate installation market in Florida where you cannot drive a service truck to the job. The island is reachable only by private ferry or boat, which means every gate install there starts with logistics. We coordinate ferry passage for the truck, the welder, the gate panels, and the operator equipment before a single tool leaves the shop. No other residential gate market in the state requires that. We’ve done enough Fisher Island jobs to know the rhythm: schedule the crossing, pack lighter than a standard haul, and make sure every fitting and bracket is in the truck. There is no running back for a forgot part. It makes the work slower and more careful, which honestly is not a bad way to install a gate.
What Can Be Saved and What Cannot: A Miami Beach Reality Check
This page exists to give you a straight answer on something most gate companies will not tell you. Salt air and storm surge put a clock on every gate component in Miami Beach, and when the countdown runs out, you need to know what is worth repairing and what is time to replace.
Ornate wrought-iron panels from the Art Deco era are almost always worth saving. The steel in those old gates is thick, and even with surface rust, a good welder can patch and refinish a 1930s panel for a fraction of what a custom reproduction costs. The hinge posts are another story. When a post has rotted through at the base or the concrete footing has cracked, that post is done. You can weld new steel to old rust all day, but the gate will sag again within a year. We replace posts and footings and reuse the panel, which preserves the historic look and saves real money.
Legacy operators are where we draw the hardest line. A control board that has been flooded more than once is not coming back. A board that is obsolete and cannot accept a modern photo-eye retrofit is a safety liability that no responsible installer should try to bandage. In those cases, replacement costs less than the liability and the repeat service calls. We’ll lay out the options honestly, and the quote will be the same either way.
This page exists to give you a straight answer on something most gate companies will not tell you. Salt air and storm surge put a clock on every gate component in Miami Beach, and when the countdown runs out, you need to know what is worth repairing and what is time to replace.
How Miami Beach’s Climate Changes Every Installation
Miami Beach is a narrow barrier island with Biscayne Bay on one side and the Atlantic on the other. That means every gate, every hinge, every operator, and every control board gets hit with corrosive salt air from two directions at once. The relative humidity rarely drops below 70%, and the city’s chronic tidal flooding means some low-lying streets see standing salt water several times a month. The city has spent hundreds of millions raising streets and installing pump stations, but the water still finds its way into ground boxes and low-mounted operators.
All of this changes how we install. We elevate motors whenever a property sits near sea level. We use galvanized or stainless fasteners on every exterior connection. We spec sealed control boards and marine-grade housings where a standard enclosure would fail within two seasons. On a 1930s Mediterranean Revival estate off North Bay Road, our techs replaced a rust-seized swing gate whose ornate hinge post had rotted through at the base. We set a galvanized steel post footing, hung a new coral-pattern iron gate to Historic Preservation Board specs, and mounted a LiftMaster operator with a marine-grade housing on a raised plinth to keep it above king-tide water. The loop detector was trenched in a way that avoided the property’s original Miami oolite coral rock.
On Miami Beach, corrosion resistance is not an upgrade. It is the baseline. If someone quotes you a gate without asking about your flood line, they’re not installing for this island.
Serving Miami Beach, FL - Our Local Coverage Area
We’re based in the Miami Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Miami Beach
Yes, in most cases you will need approval from the Miami Beach Historic Preservation Board before replacing or significantly altering a gate on a designated historic property in South Beach’s Art Deco district. We’re familiar with the board’s guidelines and can help you submit a design that uses period-appropriate materials and patterns, which is often the difference between a quick approval and a stalled permit. Call (877) 610-2993 and we’ll walk you through what your specific property needs.
Sometimes, but not always. Some mid-2000s FAAC boards have auxiliary inputs that accept a modern photo-eye with a relay module; others do not, and you’ll be told plain if your board is one of them. The safety and compliance bar is not negotiable, so if your board cannot be made UL 325 compliant, we’ll quote you a replacement operator and you’ll never get a half-safe retrofit from us.
We coordinate ferry passage or marine transport for the truck, panels, operator, welder, and all materials, then complete the full install in one scheduled visit. That is the only way it works on Fisher Island, and we’ve done enough of those jobs to know the schedule cold. The pricing reflects the extra logistics, and we’ll quote that upfront so there are no surprises.
Because the sag is almost always in the hinge post, not the panel. The post has either rotted at the base from years of salt exposure or its concrete footing has cracked from tidal soil movement. A gate sags in the hinge post, not in the middle, and that is where we start. The fix is a new post and footing, not a new panel.
Elevated motor mounting keeps the operator and control board above the water line during the king tides and storm surge that regularly flood Miami Beach streets. A ground-level operator on a low lot can be submerged multiple times a year, and salt water inside a control board means a dead gate within three or four years. Raising the motor onto a plinth is the single most cost-effective upgrade you can make on a low-lying Miami Beach property.
Call Gatewood Fence & Gate for Gate Installation in Miami Beach
If your gate is failing, sagging, corroding, or just old enough that you are not sure it will survive the next storm season, call us at (877) 610-2993. We’ll come out, look at the post and the panel and the operator, and tell you honestly what needs to happen and what it will cost. Every job carries our 90-Day Done Right Promise in writing. A live person answers the phone, day or night.
We also run our standing offers for Miami Beach customers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. You’ll get the price before the work starts, and that price is the price.
Written by Hal Gatewood, owner at Gatewood Fence & Gate, installing and repairing gates in Miami Beach since 2001.