Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mesquite
Gate installation in Mesquite costs between $900 and $6,500 depending on the gate type, width, opener, and how deep we have to go to beat the clay. Most standard driveway gates run $1,800 to $3,800 installed, with solar openers adding $700 to $1,600 where pulling power isn’t practical. Hal Gatewood and his crew know this dirt better than any out-of-town crew ever will, because we’ve been digging in it since 2001. If you’re off Lawson Road or Cartwright Road and your gate won’t hold plumb, call (877) 610-2993 and talk to a person who’s actually set posts in Blackland Prairie clay.
Why Gatewood Fence & Gate Is Mesquite’s Preferred Gate Installation Company
We’re not a franchise. Hal Gatewood’s name is on the shop, and the person who shows up to measure your gate opening is the same person who welds the hinges and sets the posts. Mesquite homeowners keep calling us because they’ve already paid someone else to do it wrong, and they’re tired of seeing their gate lean toward Galloway Avenue six months after “install day.”
Our Mesquite customers tell us the same thing on repeat: the national outfit quoted a price over the phone, a different crew showed up late, and the gate was dragging before the first freeze. That doesn’t happen with us. Every job gets a written price before we dig, and every job carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround.
We answer the phone with a live person at (877) 610-2993, 24 hours a day. Not a call center. Not a chatbot. You’ll reach someone who can talk about your specific gate and your specific yard, and we’ll schedule around your schedule, not ours.
Our Gate Installation Services in Mesquite
We install and service every gate type common to Mesquite’s mix of older brick ranch homes in 75149 and 75150 and newer acreage properties pushing east into 75181 and beyond. Each job gets a plan built around the soil, the opening width, and how you actually use the gate.
Driveway Gate Installation
A driveway gate in Mesquite has to handle two things that don’t show up on a brochure: the black clay trying to move the posts, and the actual width of your driveway. We measure both. Most Mesquite driveways in the 75149 ZIP run 12 to 14 feet wide, so a single swing gate works fine. Out east off Lawson Road, we set 16-foot, 18-foot, even 20-foot double gates for ranch entrances where you need full clearance for a trailer or a hay truck. The footing depth changes with that width, and we’ll get into exactly how deep below.
Pedestrian Gate Installation
Pedestrian gates are the ones people forget to plan for, then realize six months in that they’re walking the full driveway swing every time they check the mail. We build and hang matching walk gates beside driveway gates all over Mesquite, usually 36 to 48 inches wide, with self-closing hinges and a latch that actually lines up. If your wood fence along Towne Crossing is original to a 1970s build, we’ll match the board style so it doesn’t look bolted on.
Sliding Gate Installation
Sliding gates make sense on Mesquite properties where the driveway slopes up from the street, or where you don’t have room for a full swing arc. The catch here is the track. Mesquite ice storms coat rack-and-pinion tracks with glaze, and a cheap plastic drive gear will strip itself trying to force a frozen gate. We use steel gears and specify openers sized for the actual panel weight. A 20-foot sliding gate off a ranch road in 75181 is not the same job as a 10-foot slider in a 75150 backyard, and we don’t pretend otherwise.
Swing Gate Installation
Swing gates are the most common install we do in Mesquite, single and double. A properly set swing gate opens smooth and stays square for years. A badly set one starts dragging on the latch side within one wet season because the hinge post moved. The fix is not a bigger hinge. The fix is a deeper, wider footing, and that’s where we start every swing gate quote. For wider openings on acreage, we usually recommend a double swing gate with a center drop rod on one leaf, so you’re not asking one huge panel to hold itself up.
We also install Gate Installation hardware and openers on existing gates, and we’ll tell you straight if your current gate can be saved with new hinges and a post reset instead of a full replacement. That repair-first habit is who we are. A gate sags in the hinge post, not in the middle, and that’s where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mesquite
We’re certified to work on nine major gate opener brands, and for Mesquite acreages the three we lean on most are Ghost Controls, Linear, and Viking. Ghost Controls solar openers handle the wide, heavy panels we see off Cartwright Road and Lawson Road without needing a 400-foot power trench. Linear makes a solid AC operator for homes closer in, where power is already at the gate. Viking covers the middle ground, especially on double swing gates on older ranch-style lots. We keep common parts stocked so a Mesquite customer isn’t waiting a week on a backordered control board, and if a brand-specific failure happens, Hal will tell you exactly what it costs to fix before we order anything.
Common Gate Installation Problems We See in Mesquite Homes
- Leaning posts from Blackland Prairie clay. Mesquite sits on expansive black clay that shrinks 3 inches vertically during summer drought and heaves when the rains return. A standard 24-inch footing lets a new gate post drift several inches out of plumb inside one wet season, and the gate starts dragging or refusing to latch.
- Racked, warped wood gates on 30-to-50-year-old fences. The brick ranch homes in 75149 and 75150 mostly still have original wood privacy fences from the 1960s through 1990s. Those boards and posts are at the end of their life, and a new gate hung on a rotted hinge post will sag within months. We pull back the fence line and show you what’s actually rotted before we quote.
- Undersized solar openers on wide farm gates. A solar opener rated for a 400-pound gate will not hold a 900-pound double leaf through a cloudy North Texas winter week. We see gates locked open when livestock are out, or openers that drain their battery and die overnight. Sizing the operator to the actual panel weight is the whole job.
- Ice-stripped slide gate gears. The freeze cycles Mesquite gets every few winters coat rack-and-pinion tracks in glaze. If the operator forces a frozen gate, the plastic drive gear strips. We spec steel gears and operators with enough torque to break light ice without eating themselves, and we’ll adjust the track so water drains instead of pooling.
Pricing for Gate Installation in Mesquite, TX
Here’s what we actually charge in Mesquite. A single wood or aluminum swing gate on a residential driveway in 75149 or 75150 typically runs $900 to $2,400 installed, including hinges, latch, and post-setting. A double swing gate for a wider opening runs $2,200 to $4,500, depending on material and whether we’re adding an opener. Automatic openers add $700 to $1,600 for AC-powered units, and $900 to $1,800 for solar, with the panel and battery included. Full ranch-entrance packages, meaning a 16-to-20-foot double gate with a heavy-duty opener and deep footings, land between $4,000 and $6,500. Every price is written down and agreed before we dig, and we offer free estimates across Mesquite. Seniors and veterans get a permanent 10% discount off any job.
We Also Serve Cities Near Mesquite
We regularly run crews through Balch Springs, Sunnyvale, Seagoville, and Hutchins, and the same footing standards and the same written pricing apply. If you’re just outside city limits and you’ve been told your gate needs “special handling,” call us and get a straight answer. See Gate Installation in Mesquite for the full local picture, or call (877) 610-2993 and we’ll come measure it.
Serving Mesquite, TX - Our Local Coverage Area
We’re based in the Mesquite area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Mesquite
A gate post footing in Mesquite’s Blackland Prairie clay needs to go at least 36 to 48 inches deep, with a bell-bottomed or oversized concrete collar, not a straight-sided 24-inch pour. The clay shrinks as much as 3 inches vertically during summer drought and swells after heavy rain, and a shallow footing will let the post drift out of plumb within one wet season. For anything wider than a 10-foot gate, we go 48 inches and oversize the collar by 30% or more. Call (877) 610-2993 for a free footing check on your existing gate.
Yes, but only if the solar opener is rated for the actual panel weight and leaf width. A 900-pound double gate off Lawson Road needs a solar kit sized for that load, plus enough battery capacity to cover cloudy winter weeks. We install Ghost Controls solar openers on Mesquite acreages specifically because they handle wide farm gates without a trench. Call (877) 610-2993 and we’ll size it from the gate’s real weight, not a guess.
Yes. Even on a private, gated driveway off a Mesquite ranch road, an automatic gate needs a safety device, either retro-reflective photo-eyes or a contact edge sensor, to stop the gate if a child, a pet, or a vehicle is in the swing path. A long rural driveway doesn’t remove the risk. We install safety edges and photo-eyes on every automated gate we set, and we’ll test them with weight before we leave. Call (877) 610-2993 if you want a second opinion on an existing setup.
Because the hinge post moved. Mesquite’s black clay swells when wet and shrinks when dry, and if the original installer poured a standard shallow footing, the post has likely shifted toward or away from the latch post, pulling the gate out of square. The fix is resetting the post in a deeper, bell-bottomed footing, not shaving the latch or adding a wheel. We’d auger to 42 or 48 inches, oversize the concrete collar, and reset dead plumb. Call (877) 610-2993 and we’ll come probe the footing before quoting anything.
A double swing gate with a center drop rod is usually the best call for a 20-foot livestock entrance in Mesquite. The two 10-foot leaves mean each post carries half the weight, and the drop rod holds both panels when closed so livestock can’t push through the middle. For powered operation, a solar opener sized for the full panel weight keeps the gate automatic without running mains power 400 feet down the driveway. Hal has set these exact gates off Lawson Road and along the eastern corridor in 75181, and we’ll spec it from your opening and your herd. Call (877) 610-2993 for a written quote.
Contact Gatewood Fence & Gate for Gate Installation in Mesquite
We set a 16-foot double swing gate on a ranch entrance off Lawson Road in 75181 where the owner had already lost two posts to soil heave. Our crew augered 48-inch footings, oversized the concrete collar by 30%, and installed a Ghost Controls solar gate opener rated for a 900-pound panel because pulling mains power 400 feet down the driveway wasn’t practical. After two full wet-dry cycles, the hinge posts are still dead plumb and the photocells haven’t false-tripped once. That’s what we mean when we say we build for this dirt.
If your gate is leaning, dragging, dead, or just not built yet, call (877) 610-2993 for a free estimate. Hal Gatewood’s name is on the shop and on every invoice, and a live person answers around the clock. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mesquite since 2001.